Compress Air


Status
Not open for further replies.

ManuelH

New Member
Jan 29, 2004
9
0
0
Bukit Batok
www.myhoo.net
#1
I have heard of using compress air to blow out the dust from CCD of dSLR.

Anyone out there actually using it?
If yes, please share the brand / cost / where to buy.

Using the Sensor SWAB from www.photosol.com is very expensive.
One cleaning cost average about SGD9.

Thanks.
 

Prismatic

Senior Member
Feb 25, 2003
1,323
0
36
38
In the void.
Visit site
#2
Not really advisable. Using a conventional blower will be better.
Cos using compressed air, you may run into the problem of condensation on your CCD, which may leave stains. Also the high pressure of the air coming out of the nozzle may damage the photosites on the CCD.
 

idor

Senior Member
Nov 11, 2004
666
0
0
42
Northern California
#3
ManuelH said:
I have heard of using compress air to blow out the dust from CCD of dSLR.

Anyone out there actually using it?
If yes, please share the brand / cost / where to buy.

Using the Sensor SWAB from www.photosol.com is very expensive.
One cleaning cost average about SGD9.

Thanks.
Aiyah, this is cheaper than sensor swab

http://www.pbase.com/copperhill/ccd_cleaning

It is mentioned many times in other threads..... I personally used this method... very very clean.... just need to spend some time practicing.
 

ManuelH

New Member
Jan 29, 2004
9
0
0
Bukit Batok
www.myhoo.net
#4
idor said:
Aiyah, this is cheaper than sensor swab

http://www.pbase.com/copperhill/ccd_cleaning

It is mentioned many times in other threads..... I personally used this method... very very clean.... just need to spend some time practicing.
Yes, I did saw this PEC PAD....reluctant to use it because of below..

Quote from www.photosol.com
http://www.photosol.com/pecpadproduct.htm

PEC*PAD is not recommended for cleaning the CCD. It is not the same material used in the Sensor Swabs. PSI does not approve or warranty the CCD or any camera part from any damage caused by using non approved products.

I am still looking for compress air.
In fact I think I read somewhere said Fuji and Kodak recommend using compress air to clean the CCD. Of course the compress air should not have any residue or oil particle, which is excatly why I am looking for this kind of compress air.

Found this website
"A high velocity, residue free stream of gas, perfect for cleaning cameras, camcorders, electronics, musical instruments, sewing machines, electric razors, smoke detectors and much more."
http://www.americanrecorder.com/catalog/default.php?cPath=10

but according to some users, the canister will leak once it is used even once. So in the end it might be even more expensive...so I am still searching................
 

idor

Senior Member
Nov 11, 2004
666
0
0
42
Northern California
#5
ManuelH said:
Yes, I did saw this PEC PAD....reluctant to use it because of below..

Quote from www.photosol.com
http://www.photosol.com/pecpadproduct.htm

PEC*PAD is not recommended for cleaning the CCD. It is not the same material used in the Sensor Swabs. PSI does not approve or warranty the CCD or any camera part from any damage caused by using non approved products.

I am still looking for compress air.
In fact I think I read somewhere said Fuji and Kodak recommend using compress air to clean the CCD. Of course the compress air should not have any residue or oil particle, which is excatly why I am looking for this kind of compress air.

Found this website
"A high velocity, residue free stream of gas, perfect for cleaning cameras, camcorders, electronics, musical instruments, sewing machines, electric razors, smoke detectors and much more."
http://www.americanrecorder.com/catalog/default.php?cPath=10

but according to some users, the canister will leak once it is used even once. So in the end it might be even more expensive...so I am still searching................
Hmmm... you must remember that the filter on top of your CCD is real hard. So unless you mess around with it too hard, it is unlikely that it will be scratched... regarding the CO2 gas, it is same as the ones I use to top up air for my bicycle... The only worrying danger of that is that you may accidentally fuse the dust particles to your low pass filter. Ultimately the decision lies on you. I prefer to DIY.
 

MoriMori

New Member
Mar 1, 2003
172
0
0
41
Visit site
#6
FUD. Fear Uncertainty & Doubt.

BUY BUY our overpriced cleanroom Q tips which don't work that well!
 

Status
Not open for further replies.
Top Bottom