BOSSMEN SDG46 humidity level not stable

[marlin]

Anybody using this dry cabinet model...i was wondering if there i anything wrong..( i wanted a stable level of 40%)

There are 3 levels on the dial meter. LR, MR and HR which stands for low , medium and high. On my first use , I switch to LR for 24 hours with nothing in the cabinet.....humidity level dropped to almost 20%.....then i add in my stuff and turn to MR..medium...the humidity went to around 50%.. with door closed for about a day...( no opening of door at all)...the humidity slowly creep up by day 2 up to 59%...btw (I am using a digital hygrometer, salt calibrated)..felt strange....so open the door turn the dial halfway between LR and MR...level drop to 28% in a day but again the level creep up again to abt 45 %.....why :dunno: ......Or should i jus switch LR lowest humidity and leave it there.....anyone can share his experience?

 

[hoppinghippo]

you can check old posts on cabinet probs, but to summarise, read the instructions that come with it, usu you're supposed to leave it at any setting for 2 days or more to run in the cabinet, THEN put your stuff. Leave it for a day before making adjustments. give it time to stabilise

 

[theITguy]

Leakage. Door seal is not complete. Anyway, the motor does not work as it should, it work only when you switch to LR, which in turn is only like an On/Off switch. Throw my 26L away after 1 month+ after I got my DigiCabi 70L. Waste of my time to bring it back home, much less to return. You should ask for refund if it is within one week. $78 for me is a learning lesson.

 

[SianZronG]

Anybody using this dry cabinet model...i was wondering if there i anything wrong..( i wanted a stable level of 40%)

There are 3 levels on the dial meter. LR, MR and HR which stands for low , medium and high. On my first use , I switch to LR for 24 hours with nothing in the cabinet.....humidity level dropped to almost 20%.....then i add in my stuff and turn to MR..medium...the humidity went to around 50%.. with door closed for about a day...( no opening of door at all)...the humidity slowly creep up by day 2 up to 59%...btw (I am using a digital hygrometer, salt calibrated)..felt strange....so open the door turn the dial halfway between LR and MR...level drop to 28% in a day but again the level creep up again to abt 45 %.....why :dunno: ......Or should i jus switch LR lowest humidity and leave it there.....anyone can share his experience?

i'm using a bossmen too. 28L at first i experience these influxes but in the end i just set my dail to MR.... then leave it there.... and it's usually around 45-50 on the analog meter.... i dun have a digital meter so can't mesure....

 

[Virgo]

Try using Digi Cabi. Got the 90L model during IT show @ $198. Humidity pretty stable at 40-45%.