The ways camera communicates with the lens, what are the protocols?
Is it feasible/economical to make adaptors which can connect Canon lens to
Nikon, KM, Pentax, etc? I make a living in electronics.
:think:
The ways camera communicates with the lens, what are the protocols?
Is it feasible/economical to make adaptors which can connect Canon lens to
Nikon, KM, Pentax, etc? I make a living in electronics.
:think:
The ways camera communicates with the lens, what are the protocols?
Is it feasible/economical to make adaptors which can connect Canon lens to
Nikon, KM, Pentax, etc? I make a living in electronics.
:think:
It will not be that difficult to find out the communication protocol, you will probably just need a logic analyser and an oscilloscope as some of the contacts may be carrying analog signals. But even if you can interface the electronics, it may not be that feasible to interface the mechanical and optical aspects.
1) The electronic contacts sits on the lens mount itself and if you would like to put in a non invasive adaptor, then you will need some space and that would mess up the optics unless you put in a piece of optics to correct the additional distance. eg, M42 adapters.
2) Some lenses are electronically driven while some are a combination. For example, Canon's EOS lenses have an electronic aperture control and the AF motor is in the lens. For Nikon, the aperture is mechanically controlled. With the exception of the AF-S lenses which uses linear ultrasonic motor, the AF motor is built into the body and is coupled by a mechanical shaft to turn the focusing in the lens.
What is more feasible would be the interface for electronic flashes.
actually, i think this will soon become free information as it was patented sometime back in the 80s when the EF mount first came out. Assuming a patent of 20yrs, which is the norm, it should be out in the public domain soon.