Stabilizer - For DSLR / Mirrorless Camera, GoPro and Smartphone

[7daydeal]

(1) Beholder DS1 Camera Stabilizer (Electronic Handheld Camera Gimbal Stabiliser DS-1) For DSLR & Mirrorless (Buy at $840)


$840 - 1 Year Warranty


Brand new.

In stock.


Cash and carry at our store at


7daydeal.com
Parklane Shopping Mall,
#04-15,
35 Selegie Road,
Singapore 188307

. Mon-Sat (12-8pm)
. Sun & Public Holiday (12-6pm)


www.7daydeal.com

Tel: 92381402 / 91990878



Posting if required is $7. Delivery by TaQBin usually takes 1-2 working days.


For posting option, please bank transfer the total amount to DBS Current Account 033-903093-7 and Sms/Whatsapp me the screen shot of the payment, name and delivery address.



PRODUCT INFORMATION:

Stabilize the Action

Take your adventure footage to the next level!!

The Beholder DS-1 Stabilizer will allow you to do what was previously impossible - SHOOT STABLE HANDHELD FOOTAGE.


Lightweight for its size yet designed to support DSLR cameras, the BeHolder DS1 Gimbal for DSLR and Mirrorless Cameras is a 3-axis gyro stabilizer with brushless motors.

It supports cameras such as Sony A7, A7II, AR7, A7R, NEX Series, GH4, G7 Series, Canon 5D, 6D, 7D, 70D, 60D, 760D, 750D, 700D, GX7, and Nikon D4 Series, D810, D800, D750, D610, D700 cameras to name a few.


It features a quick release baseplate that makes it simple and easy to swap out the camera. Additionally, the baseplate can be adjusted, without tools, for precise balance. This can be especially useful when changing lenses.

The DS1 features four selectable stabilizing modes: follow, lock, inverted, and briefcase. Beyond just stabilizing, the DS1 allows you to adjust pan and tilt via a small joystick incorporated into the handgrip.

It incorporates a USB port, which you can use to power a smal LED light, or charge your smartphone. The handle houses the three 2600mAh batteries, which can typically power the DS1 for approximately 2 to 3 hours.


For smooth camera moves with most mirrorless and DSLR cameras.

Equipped with 3-axis gyro-stabilized brushless motors to stabilize most mirrorless and DSLR cameras up to 1.7kg.

The quick release plate acts as a sliding balance plate and allows you to quickly adjust the rig when you change lenses on the camera.

Each axis features two adjustment locking levers that allow you to pre-adjust the position or balance your camera on the gimbal before turning it on.


Modes
Follow Mode stabilizes the camera and allows it to follow your movements as you pan and tilt.
Lock Mode stabilizes the camera and holds in position even if you pan, tilt, or try to dutch-angle (off level the camera), until you reach the physical limit of the motor.

You can hold and use the DS1 in normal, inverted, or briefcase mode. This allow you to get a wide variety of shots in a many different situations using one stabilizer.
Illuminated on/off switch and battery indicator.
3/8"-16 tripod mount socket.

Features:

- 3-Axis Motorized Gimbal
- Supports DSLRs Up to 1.7kg
- Quick Release Baseplate
- Tool-Less Balance Adjustments
- Two Stabilizing Modes
- Motorized Pan and Tilt Adjustment
- Use Normal, Inverted, or Briefcase
- Integrated USB Port for Power
- 3/8"-16 Threaded Mounting Hole


Start shooting video like a pro in seconds with your Camera! Full stabilization provides smooth and professional video quality without abrupt jerking!

The compact design of the DS-1 allows for an extremely precise and handy camera stabilization. Shoot video from the palm of your hand as if you were working with a full steady cam rig or moving along invisible tracks.


The Beholder DS-1 is the ideal accessory to bring your video recordings to a whole new level of professionalism with minimal effort.

Specifications:

- Model no: BeHolder DS1
- Range Roll: 45°
- Range Tilt: 90°
- Battery: 2 to 3 hours
- Battery Type: 3 x 3.7V Li-Ion 18650 type 2600mAh
- Load Capacity: 1.7 kg
- Weight: 1.1 kg (including batteries)


Items included:

- BeHolder DS1 Handheld Camera Gimbal Stabilizer
- Battery Cap
- Battery Holder
- Camera Offset Bracket
- Micro USB Cable
- Quick Release Plate
- 6 pieces 18650-Type Battery
- USB LED Light
- Laser-Cut-Foam Soft Carry Case

 

[7daydeal]

(2) DF400 Stabilizer Carbon Fiber (Handheld Video Camera Stabiliser) For DSLR & Mirrorless (Buy at $199)


Brand new.

In stock.

1 Year Warranty.


Cash and carry at our store at


7daydeal.com
Parklane Shopping Mall,
#04-15,
35 Selegie Road,
Singapore 188307

. Mon-Sat (12-8pm)
. Sun & Public Holiday (12-6pm)


www.7daydeal.com

Tel: 92381402 / 91990878



Posting if required is $12. Delivery by TaQBin usually takes 1-2 working days.


For posting option, please bank transfer the total amount to DBS Current Account 033-903093-7 and Sms/Whatsapp me the screen shot of the payment, name and delivery address.



PRODUCT INFORMATION:

Start shooting video like a pro in seconds with your camera! Enjoy smooth and professional video quality without abrupt jerking!

The compact and sturdy design allows for precise and handy camera stabilization. Shoot video from the palm of your hand as if you were working with a full steady cam rig or moving along invisible tracks.

This stabilizer is the ideal accessory to bring your video recordings to a whole new level of professionalism with minimal effort and cost!

Items included:

1 x DF400 Handheld Stabilizer
2 x Screw on Weight
2 x Allen Key

 

[7daydeal]

(3) Zhiyun Z1 Smooth C 3-Axis Electronic Handheld Gimbal Stabilizer (Stabilizing brushless Gimbal for 6.5 inch and below Smartphone and adapter for GoPro Hero 3 3+ 4 GoCam sjcam Sj5000 xiaoyi Action Camera) (Buy at $239)


Optional accessories:

(1) GoPro Hero 3/3+/4 Adapter - $40

(2) Zhiyun 18650 battery - $30 (1 pair)

(3) Zhiyun 18350 battery - $25 (1 pair)

(4) Zhiyun Extension Tube - $29 (To enable the Smooth C to use high capacity 18650 battery to extend battery life to 5-7 hours)



1 Year Singapore Zhiyun's Agent Warranty



Cash and carry at our store at


7daydeal.com
Parklane Shopping Mall,
#04-15,
35 Selegie Road,
Singapore 188307

. Mon-Sat (12-8pm)
. Sun & Public Holiday (12-6pm)


www.7daydeal.com

Tel: 92381402 / 91990878



Posting if required is $7. Delivery by TaQBin usually takes 1-2 working days.


For posting option, please bank transfer the total amount to DBS Current Account 033-903093-7 and Sms/Whatsapp me the screen shot of the payment, name and delivery address.



PRODUCT INFORMATION:

Z1-smooth can upgrade your smartphone to a professional stabilizing camera. With its strong torque and accurate processor, anyone can make a professional video with a smartphone.

It has three work modes and can adjust the angle of cellphone. And It’s widely suitable for various of smartphones in the market. When start it, there is no necessary to worry that center of gravity(CG) is unsteady, it has been calibrated by the manufacturer and you also can adjust CG of gimbal.


The use of extension pole make you shoot more wonderful pictures. Cooperating with bluetooth, Z1-Smooth is not only a selfie artifact but a professional film artifact. Thus the filming is smooth and steady.

With the GoPro adapter you can use now use your GoPro action camera with the Z1 Smooth C.

Note: Please don't operate the handheld gimbal over working range. The handheld gimbal would be in self-protection mode, and the operation would be effected.

Three operation modes:
When in Heading Following Mode, the indicator blink slowly. Pitch and roll are rocked. Heading rotates smoothly follow the direction of the handheld.
When in Locking Mode, the indicator light up. Pitching and roll are locked.
When in Heading and Pitch Following Mode, the indicator blink quickly. Roll is locked. Heading and pitch rotate smoothly follow the direction of the handheld.

Note: In following situation, please do calibration again.

1. Opening the handheld gimbal with horizontal deviation.
2. Not using the handheld gimbal for a long time.
3. The temperature variation change too much.

Features:

- Light ,simple, stable and flexible, low power consumption, portable, durable, no alveolar.
- Specially designed for all smartphones within 6.5 inch screen.
- Built-in independent IMU module, ensure the stability and fluency of your videos / short
films / recording during exercise.
- Switch between manual-control and auto-control freely, also with one-second awakening
function in standby condition, which let you never miss to shoot every wonderful moment.
- Three operation modes: Heading Following Mode, Locking Mode, Heading and Pitch
Following Mode. Can adjust the tilt and roll angle easily.
- Multi-angle Rotation: 270° tilt working angle, 90° roll working angle, 270° vertical heading working angle.

Specification:

- Output voltage: min. 6.8V / max. 12.6V
- Working current: min. 50mA / standard 120mA / max. 2A
- Static attitude tracking error: ±0.01 / max. ±0.04
- Dynamic attitude tracking error: min. ±0.1 / standard ±0.2 / max. ±0.5
- Pitch axis mechanical movement range(vertical): -90° / max. +180°
- Roll axis mechanical movement range: -45° / max. +45°
- Translation pan axis mechanical movement range(vertical): -135° / max. +135°
- Translation pan axis mechanical movement range(horizontal): -45° / max. +45°
- Pitch axis following rate: min. 1°/S / max. 50°/S
- Translation pan axis following rate: min. 1°/S / max. 80°/S
- Operation temperature: min. -20°C / standard 25°C / max. 45°C
- Battery life: min. 3h / standard 4h / max. 5h
- Gimbal weight: 371g



Package Included:

- Z1 Smooth C
- Camera protection sticker for pan axis motor
- Counterweight
- 18350 Li-Po battery X 2
- 18350 Li-Po battery charger
- Micro USB cable for charging and upgrading firmware
- Instruction manual (Chinese and English)

 

[7daydeal]

(4) Zhiyun Rider M 3-Axis Electronic Handheld and Wearable Gimbal Stabilizer (Stabilizing WG wearing brushless Gimbal for GoPro Hero 3, 3+, 4, 5, Session 4, GoCam sjcam Sj5000 xiaoyi Action Camera) (Buy at $360)


Optional accessories:

(1) GoPro Session 4 Bracket - $39

(2) GoPro Hero 5 Bracket - $39

(3) Zhiyun Remote Control (Bluetooth Wireless ZW-B01) - $49



1 Year Singapore Zhiyun's Agent Warranty


Cash and carry at our store at


7daydeal.com
Parklane Shopping Mall,
#04-15,
35 Selegie Road,
Singapore 188307

. Mon-Sat (12-8pm)
. Sun & Public Holiday (12-6pm)


www.7daydeal.com

Tel: 92381402 / 91990878



Posting if required is $7. Delivery by TaQBin usually takes 1-2 working days.


For posting option, please bank transfer the total amount to DBS Current Account 033-903093-7 and Sms/Whatsapp me the screen shot of the payment, name and delivery address.



PRODUCT INFORMATION:

NOTE: Camera and selfie stick shown in the pictures are NOT included.

BORN FOR GoPro and other Action Cameras from GoCam, sjcam, Sj5000, xiaoyi.


Rider-M: smaller, lighter and stronger. Rider-M not only becomes more portable, but also supports remote control by APP. Rider-M is more flexible due to the 1/4 inch screw port which is compatible with all kind of photographic equipment.

Features:

- Control the Rider-M with a new smart phone APP: Not only is Rider-M exquisite and compact, but it allows you to shed the cable. The innovative APP, with wider angles of rotation, allow you to create the videos you desire
- Everything is in your view: Rider-M can be easily connected to a wide variety of video devices, with zero-delay video output you can easily make adjustments to the video you are shooting
- Manual setting of camera direction: Without using the APP, you can quickly change the camera direction by gently twisting the camera by hand to get the amazing videos you long for
- Endless possibilities inspire your next video creations: with multiple ways of mounting the Rider-M, the video you creat is only limited by your imagination
- Lighter and faster: Rider-M, with a streamlined yet simple design, has a net weight of only 175g. Though smaller in size, Rider-M delivers a powerful performance with quicker startup times. Rider-M is the gimbal you will bring with you everything to effortlessly create smoother videos

Specification:

- Output voltage: min. 6.8V / max. 12.6V
- Working current: min. 50mA / standard 80mA / max. 3000mA
- Camera charging voltage: min. 4.5V / standard 4.9V / max. 5.1V
- Camera changing current: 800mA
- Static attitude tracking error: ±0.01 / max. ±0.05
- Dynamic attitude tracking error: min. ±0.05 / standard ±0.1 / max. ±0.4
- Pitch axis mechanical movement range(vertical): -185° / max. +130°
- Roll axis mechanical movement range: -40° / max. +40°
- Translation pan axis mechanical movement range(vertical): -320° / max. +320°
- Translation pan axis mechanical movement range(horizontal): -45° / max. +45°
- Pitch axis following rate: min. 1°/S / max. 50°/S
- Translation pan axis following rate: min. 1°/S / max. 80°/S
- Operation temperature: min. -20°C / standard 25°C / max. 50°C
- Battery life: min. 3.5h / standard 4.5h / max. 5.5h
- Gimbal weight: 180g
- Package weight: 650g
- Package dimension: 247*122*62mm

Package Included:

- Z1-Rider-M
- 18350 Li-Po battery X 4
- 18350 Li-Po battery charger
- Micro USB cable for charging and upgrading firmware
- GoPro charging cable
- GoPro video output and charging cable
- Mounting adapter
- Instruction manual (Chinese and English)

 

[7daydeal]

(5) Wenpod GP1+ GoPro Stabilizer (Electronic Handheld Camera Gimbal Stabiliser GP-1) For GoPro Hero 3, 3+ and 4 Black Or Silver(Buy at $200)


Brand new.

In stock.

No Warranty.


Cash and carry at our store at


7daydeal.com
Parklane Shopping Mall,
#04-15,
35 Selegie Road,
Singapore 188307

. Mon-Sat (12-8pm)
. Sun & Public Holiday (12-6pm)


www.7daydeal.com

Tel: 92381402 / 91990878



Posting if required is $7. Delivery by TaQBin usually takes 1-2 working days.


For posting option, please bank transfer the total amount to DBS Current Account 033-903093-7 and Sms/Whatsapp me the screen shot of the payment, name and delivery address.



PRODUCT INFORMATION:

Stabilize the Action

Take your adventure footage to the next level!!

The Adventure Camera Stabilizer will allow you to do what was previously impossible - SHOOT STABLE HANDHELD FOOTAGE.

For the first time you can seamlessly switch angles mid-run, adjust the tilt on the go, and frame-up every shot with the 3.5 inch LCD screen.

You'll no longer have to guess if you captured the perfect shot - because you'll know that you have it.

How Does It Work?

A powerful 32 Bit MCU processor works with gyroscopic technology measuring your movements,
these measurements are then sent to two brushless motoros that contantly react to your movements and keep the camera steady.


Features:

- Battery A custom designed Li-Po battery lasts for two plus hours.
- LCD Screen A rotatable 3.5 inch LCD screen allows you to see all of the action.
- Tilt An adjustable 180 degrees tilt makes it possible to smoothly change your angle on the run.
- 360 DEGREE ROTATION: World-first! 360 degree rotation in roll and pitch axis for easy low angle shots.
- JOYSTICK CONTROLLER: Allows adjustable shooting angle via the joystick.
- AUTO CALIBRATION: Fully automatic calibration. No parameter input required.
- Start Time Within seconds of clicking the power button the stabilizer is ready to go.
- Protective Frame: A solid aluminum frame protects the camera.
- Compatibility: The stabilizer works with the GoPro Hero 3, 3+, or 4 camera

Start shooting video like a pro in seconds with your GoPro! Full stabilization provides smooth and professional video quality without abrupt jerking!

The compact design of the GP-1 allows for an extremely precise and handy camera stabilization. Shoot video from the palm of your hand as if you were working with a full steady cam rig or moving along invisible tracks.


The GP-1 is the ideal accessory to bring your video recordings to a whole new level of professionalism with minimal effort.



Specifications:

- Model no: WENPOD GP1+
- Dimension: L 135mm x W 136mm x H 242mm
- Weight: 405g (including battery)
- Screen size: 3.5 inches
- Screen brightness: 400-800 cd/m square (auto)
- Battery type: LiPo battery with protective circuit board
- Battery capacity: 800mAh, 11.1V
- Operating time: about 150 min in normal room temperature.
- Charging time: about 30 min ("Lightning Charging" patent pending)
- Operating temperature: 10 to 40 degrees Celsius
- Operating humidity: 10%-90%
- Operating angle: 360 degrees · All direction (Horizontal/Vertical Axis)

Items included:

- WenPod GP1+ Handheld Camera Gimbal Stabilizer
- Rechargeable Lithium-Polymer (LiPo) Battery
- Battery Charger
- User Manual

 

[7daydeal]

(6) Wenpod SP1+ Stabilizer (Electronic Handheld Smartphone Gimbal Stabiliser SP-1+)(Buy at $210)


$210 - No Warranty
$250 - 1 Year Warranty


Brand new.

In stock.

1 Year Warranty.


Cash and carry at our store at


7daydeal.com
Parklane Shopping Mall,
#04-15,
35 Selegie Road,
Singapore 188307

. Mon-Sat (12-8pm)
. Sun & Public Holiday (12-6pm)


www.7daydeal.com

Tel: 92381402 / 91990878



Posting if required is $7. Delivery by TaQBin usually takes 1-2 working days.


For posting option, please bank transfer the total amount to DBS Current Account 033-903093-7 and Sms/Whatsapp me the screen shot of the payment, name and delivery address.



PRODUCT INFORMATION:

Stabilize the Action

The Wenpod SP1+ is a revolutionary video stabilizer, compatible with almost all smartphones.

Equipped with a universal clamp to fit pretty much all smart phones in the market today such as iPhone 5, 5s, 6, 6s, 6 Plus, 6SE, SE, LG G2, G3, G4, V10, Samsung S3, S4, S5, S6, S7, Note 2, 3, 4, 5, 6, II, III, IV, V, VI, Edge, Sony Z2, Z3, Z4, Z5, Z6 etc

Start shooting video like a pro in seconds with your smartphone! Full stabilization provides smooth and professional video quality without abrupt jerking!

The compact design of the SP1+ allows for an extremely precise and handy camera stabilization. Shoot video from the palm of your hand as if you were working with a full steady cam rig or moving along invisible tracks.


The SP1+ is the ideal accessory to bring your video recordings to a whole new level of professionalism with minimal effort.


Note: When you first use the gimbal, please mount the phone first and make sure it is balanced. You can then insert the battery and switch the gimbal on. Otherwise, the center of gravity may change and result in vibration.

Add the weight provided for heavier than normal smartphone.

Specifications:

- ZERO degree auto leveling (2 axis)
- Adjustable tilt angle (with thumb controlled joystick)
- 360 degree rolling capability
- Proprietary fast & silent AC brushless motor
- Horizontal and vertical fine tune
- Proprietary FUZZY A.I. algorithm
- Fully automatic fast start up
- Operating time on single charge: Aprox. 120 min. (Add $30 for extra battery)
- Size: 114 x75x262mm
- Weight: 370g

Items included:

1 x Wenpod SP1+ Handheld Stabilizer for smartphone
1 x Charger
4 x Plugs
1 x Battery (Add $30 for extra battery)
1 x Wrench

 

[7daydeal]

(7) Zhiyun Smooth II 3-Axis Electronic Handheld Gimbal Stabilizer (Stabilizing brushless Gimbal for 6.5 inch and below Smartphone and adapter for GoPro Hero 3, 3+, 4, GoCam sjcam Sj5000 xiaoyi Action Camera) (Buy at $339)


Optional accessories:

(1) GoPro Hero 3/3+/4 Adapter - $40

(2) Zhiyun 18650 battery - $30 (1 pair)

(3) Zhiyun Remote Control (Bluetooth Wireless ZW-B01) - $49



1 Year Singapore Zhiyun's Agent Warranty



Cash and carry at our store at


7daydeal.com
Parklane Shopping Mall,
#04-15,
35 Selegie Road,
Singapore 188307

. Mon-Sat (12-8pm)
. Sun & Public Holiday (12-6pm)


www.7daydeal.com

Tel: 92381402 / 91990878



Posting if required is $7. Delivery by TaQBin usually takes 1-2 working days.


For posting option, please bank transfer the total amount to DBS Current Account 033-903093-7 and Sms/Whatsapp me the screen shot of the payment, name and delivery address.



PRODUCT INFORMATION:

Zhiyun Smooth series gimbal for smartphone has been favored and high-praised among the users since released. We globally absorbed advice from thousands of fans, made sweeping improvement and released the flagship model of smartphone gimbal, Smooth-ll.

Smooth-ll adds more considerate designs and focuses on user experiences. More up-to-date functions: special designed APP, Bluetooth remote control, shot while charging, vertical shooting and panorama mode. With Smooth-ll, everyone can be a professional photographer.


With the GoPro adapter you can use now use your GoPro action camera with the Zhiyun Smooth II.

Rapid start
Press and hold the multifunctional power button for three seconds, the Smooth-ll enters working mode. The advanced protection techniques, i.e. from short-circuit, reverse, over-discharge, ensure safe starting up.

Precise craft
Drop resistance - aviation grade aluminium alloy material; Light - precise CNC technique; Comfortable hand feeling - blasting process; Luxury experience - chamfering matt management.

1/4 inch screw thread. Multiple combinations
With the 1/4 screw thread at the bottom, the Smooth-II can be matched with multiple filming accessories, i.e. tripod, extension rod, cupula, or hand held to make delay shooting and create the effect of rocker arm.

Unlimited creation
With 360 degrees unlimited rotation design for pan axis, you can change the angle as you want. The vertical shooting mode adds convenience for you inspiration.

Joystick, everything is simple.
Using the classic stepless rotational joystick, you can handle everything within fingertip. Easy work, easy fun.

Super noise reduction
Zhiyun’s advanced noise reduction technique, block noise and create the most original video.

Stable enlarged frame
The honeycomb core arithme is the advanced control arithme researched and developed by Zhiyun. The gimbal attitude control, combined with efficient motor control technology, makes it possible for fast and accurate compensation for instant disturbance, which reaches the world's highest standard of noise reduction. Even the frame is enlarged 5 times you will never notice the shaking.

Charging by USB port
Charge the stabilizer by connecting power to the USB port. You don't have to worry about low battery problem any more!!!

Customized
The special designed Zhiyun camera APP makes it easy to operate camera by pressing power button and by pushing the shifter lever. Quick setting focus, shutter and shooting, switching between front/main camera, switching photo/video mode.

Specification:

Stabilizer
Model: Smooth-II
Dimension：115mm W：34.5mm H：285mm
Operation current: 250mA
Operation temperature: -10°C-45°C
Run-time: 5h
Weight: 395g（Battery excluded）
Payload weight: 200g
Tilt axis mechanical movement range: 270°
Roll axis mechanical movement range: 90°
Pan axis mechanical movement range: 360°

Support smartphones
Model: Almost all smartphones
Maximum smartphone width: 81.5mm (Maximum mount stretching width）
Minimum smartphone width: 55mm (Minimum mount stretching width）

Package Included:


- Zhiyun Smooth II
- Camera protection sticker for pan axis motor
- Counterweight
- 18650 Li-Po battery
- Micro USB cable for charging and upgrading firmware
- Instruction manual (Chinese and English)

 

[7daydeal]

(8) Zhiyun Evolution 3-Axis Electronic Handheld Gimbal Stabilizer (Stabilizing brushless Gimbal for 6.5 inch and below Smartphone and adapter for GoPro Hero 3, 3+, 4, 5, Session 4, GoCam sjcam Sj5000 xiaoyi Action Camera) (Buy at $339)


Optional accessories:

(1) GoPro Session 4 Bracket - $39

(2) GoPro Hero 5 Bracket - $39

(3) Zhiyun Viewfinder Monitor for Evolution - $49 (To have live view when using with GoPro Hero 3 / 3+ / 4)

(4) Zhiyun 18650 Battery (1 Pair) - $30



1 Year Singapore Zhiyun's Agent Warranty



Cash and carry at our store at


7daydeal.com
Parklane Shopping Mall,
#04-15,
35 Selegie Road,
Singapore 188307

. Mon-Sat (12-8pm)
. Sun & Public Holiday (12-6pm)


www.7daydeal.com

Tel: 92381402 / 91990878



Posting if required is $7. Delivery by TaQBin usually takes 1-2 working days.


For posting option, please bank transfer the total amount to DBS Current Account 033-903093-7 and Sms/Whatsapp me the screen shot of the payment, name and delivery address.



PRODUCT INFORMATION:

Zhiyun Evolution, the best gimbal for GoPro camera, with 6 core techniques, 2 integrated designs, 3 protection measures and long-running performance, is a professional, fashion, strong assistant for shooting videos.

Flexible use, more inspiration
Using the classic stepless rotational joystick, switching between pan following mode, locking mode, pan and tilt following mode, you can handle everything within fingertip. Easy work, easy fun.

Synchronous charging and shooting
With a 3.5mm AV output port on the side of the handle, just plug a viewfinder and you can catch real-time image. Besides, you can connect the camera to the gimbal and charge it. Bring several batteries instead of finding a wall outlet, enjoy long-time happiness.

Compatible with two types of batteries
Zhiyun Evolution is, in the global, the first gimbal ever compatible with two types of batteries: using 18350 batteries to make the gimbal small and exquisite or 18650 batteries to get 12H run-time. The extended tube is for smart use to balance between weight and run-time considerately.

Zhiyun honeycomb technique
The honeycomb core arithme is the advanced control arithme researched and developed by Zhiyun. The gimbal attitude control, combined with efficient motor control technology, makes it possible for fast and accurate compensation for instant disturbance, which reaches the industry's highest standard of noise reduction. Even the frame is enlarged 5 times you will never notice the shaking.

1/4 inch screw thread, follow your style
With the 1/4 screw thread at the bottom, the Evolution can be matched with multiple filming accessories, i.e. tripod, extension rod, cupula, or hand held to make delay shooting and create the effect of rocker arm.

3 automotive grade encoders
Each axis carries an incredible precise magnetic encoder. Even 0.02 degree change can be sensed. The Evolution is the most stable gimbal.

The industry’s first to achieve MCU parallel control
Zhiyun Evolution is the industry’s pioneer to achieve three 32-bit MCUs running in parallel at incredible 4k hertz. The number is far beyond the reach of any other gimbals.

Specification:

Stabilizer
Model: Evolution
Dimension: L:123mm W:34.5mm H:287mm
Operation current: 250mA
Operation temperature: -20°C-45°C
Run-time: 13h
Weight: 220g (Battery excluded)
Payload weight; 200g
Tilt axis mechanical movement range: 270°
Roll axis mechanical movement range: 90°

Support Action Cameras
Model: GoPro, Xiaomi Yi etc.
Maximum payload size: H：42.3mm W：30mm

Package Included:

- 1 x Zhiyun Evolution 3-axis Handheld Gimbal
- 2 x 18650 Li-Po battery
- 1 x 18650 battery charger
- 1 x Battery extension cover
- 1 x USB cable
- 1 x GoPro AV output cable
- 1 x User Manual

 

[7daydeal]

(9) Zhiyun Crane 3-Axis Electronic Handheld Gimbal Stabilizer for DSLR & Mirrorless Camera and lens up to 1.2kg + FREE Quick Release Plate(Buy at $920)

Optional accessories:

(1) Zhiyun Handle - $160
(To enable 2 hands operation for better control and to reduce fatigue)

(2) Zhiyun Control Cable for Sony or Panasonic Camera - $39
(To control camera Shutter, Rec/Stop Video, and Zoom from the handle of the Crane)

(3) Zhiyun Remote Control (Bluetooth Wireless ZW-B01) - $49

(4) Zhiyun 18650 Battery (1 Pair) - $30



1 Year Singapore Zhiyun's Agent Warranty



Cash and carry at our store at


7daydeal.com
Parklane Shopping Mall,
#04-15,
35 Selegie Road,
Singapore 188307

. Mon-Sat (12-8pm)
. Sun & Public Holiday (12-6pm)


www.7daydeal.com

Tel: 92381402 / 91990878



Posting if required is $7. Delivery by TaQBin usually takes 1-2 working days.


For posting option, please bank transfer the total amount to DBS Current Account 033-903093-7 and Sms/Whatsapp me the screen shot of the payment, name and delivery address.



PRODUCT INFORMATION:

Customized for most mirrorless cameras and light weight DSLR, Zhiyun Crane is professional and advanced for its technique i.e. 3 axis non-stopper design, compatibility with two types of batteries, camera controlling and hand adjustment. Crane is the best of the best mirrorless camera gimbals.

Stronger Performance
The Crane weights only 950g, with powerful payload weight 1200g for almost all mirrorless cameras. Feel free to draw inspiration from multiple lenses and mirrorless cameras!

Compatible with camera and lens between 350g and 1200g in weight.

1/4 inch screw thread, follow your style
With the 1/4 screw thread at the bottom, the Crane can be matched with multiple filming accessories, i.e. tripod, extension rod, cupula, or hand held/worn to make delay shooting and create the effect of rocker arm.

Wireless control
With the built-in wireless control module, you can remote control the Crane or upgrade firmware by connecting remote controller or APP.

Zhiyun honeycomb technique
The honeycomb core arithme is the advanced control arithme researched and developed by Zhiyun. The gimbal attitude control, combined with efficient motor control technology, makes it possible for fast and accurate compensation for instant disturbance, which reaches the industry's highest standard of noise reduction. Even the frame is enlarged 5 times you will never notice the shaking.

Tool-less, quick balance adjustment
Thumbscrew design - tool-less, quick dismount the camera, finish all the adjustment within a minute.

Note: if you need to use a long lens, please mount the lens support.

Flexible use, more inspiration
Using the classic stepless rotational joystick, switching between pan following mode, locking mode, pan and tilt following mode, you can handle everything within fingertip. Easy work, easy fun.

3 axis 360 degrees unlimited rotation
With advanced slip rings, 3 axis of Crane can rotate at 360 degrees. Any shooting requirements will be perfectly satisfied, i.e. positive grip, upright shooting, low angle, high flight photography.

The industry’s first to achieve MCU parallel control
Zhiyun Crane is the industry’s first to achieve three 32-bit MCUs running in parallel at incredible 4k hertz. The number is far beyond the reach of any other gimbals.

Specification:

Stabilizer

Model: Crane
Dimension: Length 154mm Width 159mm Height 389-402mm
Operation current: 80mA-6000mA
Operation temperature: 0C°-45C°
Run-time: 6h-12h
Weight: 950g（Battery excluded）
Payload weight: 350g-1200g
Tilt axis mechanical movement range: 360°(unlimited rotation)
Roll axis mechanical movement range: 360°(unlimited rotation)
Pan axis mechanical movement range: 360°(unlimited rotation)

Support cameras
Model: Almost all mirrorless cameras and light weight DSLR Camera

Package Included:

- 1 x Zhiyun Crane Gimbal Stabilizer
- 1 x Camera lens support
- 1 x Camera lens support Screw
- 1 x Camera Mounting Screw
- 1 x Micro USB cable
- 4 x 18650 Li-ion Battery
- 2 x Battery box
- 1 x Battery Charger
- 1 x Hard Storage Case
- 1 x User Manual
- 1 x FREE Quick Release Plate

 

[yzknobbies]

Alamak now then i see your ad... $890 is good price

 

[7daydeal]

(10) Zhiyun Crane M 3-Axis Electronic Handheld Gimbal Stabilizer for Mirrorless Camera, Compact Camera, Action Camera and Smartphone up to 650g (Buy at $580)


Optional accessories:

(1) Zhiyun Handle - $160
(To enable 2 hands operation for better control and to reduce fatigue)

(2) Zhiyun Control Cable for Sony or Panasonic Camera - $39
(To control camera Shutter, Rec/Stop Video, and Zoom from the handle of the Crane)

(3) Zhiyun Remote Control (Bluetooth Wireless ZW-B01) - $49

(4) Smartphone Holder - $5



1 Year Singapore Zhiyun's Agent Warranty




Cash and carry at our store at


7daydeal.com
Parklane Shopping Mall,
#02-16,
35 Selegie Road,
Singapore 188307

. Mon-Sat (12-8pm)
. Sun & Public Holiday (12-6pm)


www.7daydeal.com

Tel: 92381402 / 91990878



Posting if required is $7. Delivery by TaQBin usually takes 1-2 working days.


For posting option, please bank transfer the total amount to DBS Current Account 033-903093-7 and Sms/Whatsapp me the screen shot of the payment, name and delivery address.



PRODUCT INFORMATION:

Stabilize the Action

There is no second chance or second take for capturing a precious video moment. Zhiyun allows you to nail it the first time of taking or your money back guaranteed !!!

The Zhiyun-Tech Crane-M is a smaller, lighter version of the original Crane. It is designed for small mirrorless cameras, smartphones, and action cameras weighing between 125g-650g. At the same time, it has the advanced features of the original as well as improvements over it. (Separately sold adapters from Zhiyun Tech are required for mounting smartphones)

The Crane-M provides 360° rotation along the pan, tilt, and roll axes via a large 4-way joystick. It can also be controlled remotely over Bluetooth using the free Zhiyun Assistant app from your mobile device (iOS/Android).

The Crane-M operates on 32-bit triple-MCUs running in parallel at 4 kHz frequency. It also features brushless motors offering high accuracy while maintaining low vibration and increasing torque. Accuracy is ensured with a magnetic encoder in each motor and advanced stabilization algorithms. The Crane-M can achieve up to 0.01° of accuracy within 0.25 millisecond.

Featuring a quick-release plate and thumbscrew at the mounting platform, the Crane-M balances very easily without any tools. All three axes can be adjusted to your preferences in about one minute.

Multiple modes are available to select from. In Lock Mode, all three axes work together to keep the camera pointed in one position. The camera will stay still no matter how you move the handle. In Yaw-Axis Follow Mode, the Crane-M will only follow your pan movements, while in Pitch/Yaw-Axis Follow Mode, it will follow your pan and tilt movements. You can also switch to Inverted Mode at any time by simply flipping the handle over the camera. Inverted mode can be operated in conjunction with the Lock and Follow modes. In addition, the gimbal also has a Camera Control function with which shutter release can conveniently be triggered over a USB cable (sold separately) for select Sony or Panasonic cameras.

A 1/4"-20 mounting thread on the bottom of the gimbal allows mounting on tripods, monopods, and other support gear. Having the Crane-M mounted is also the ideal way of using it when controlling it remotely over the mobile app. The Crane-M runs for approximately 12 hours on included 26500 lithium-ion batteries, which take about 3 hours to fully charge.



Specifications:

- Model: Crane-M
- Dimension Length：154mm
- Width：144mm
- Height：337mm
- Operation current: 80mA-6000mA
- Operation temperature: 0C°-45C°
- Run-time: 12h-18h
- Weight: 740g (Battery excluded)
- Payload weight: 125g-650g
- Tilt: 360°(unlimited rotation)
- Roll: 360°(unlimited rotation)
- Pan: 360°(unlimited rotation)

Items included:

- 1 x Zhiyun-Tech Crane-M 3-Axis Handheld Gimbal Stabilizer
- 2 x 3.7V 3600mAh 26500 Li-Ion Batteries
- 1 x 26500 Li-Ion Battery Charger
- 1 x Micro USB Cable
- 1 x Hard Storage Case
- 1 x User Manual

 

[7daydeal]

(11) Beholder EC1 Camera Stabilizer (Electronic Handheld Camera Gimbal Stabiliser EC-1) For DSLR & Mirrorless (Buy at $1150)


1 Year Warranty


Brand new.

In stock.


Cash and carry at our store at


7daydeal.com
Parklane Shopping Mall,
#04-15,
35 Selegie Road,
Singapore 188307

. Mon-Sat (12-8pm)
. Sun & Public Holiday (12-6pm)


www.7daydeal.com

Tel: 92381402 / 91990878



Posting if required is $12. Delivery by TaQBin usually takes 1-2 working days.


For posting option, please bank transfer the total amount to DBS Current Account 033-903093-7 and Sms/Whatsapp me the screen shot of the payment, name and delivery address.



PRODUCT INFORMATION:

Stabilize the Action

Take your adventure footage to the next level!!

The Beholder EC-1 Stabilizer will allow you to do what was previously impossible - SHOOT STABLE HANDHELD FOOTAGE.

The Beholder EC1 is a 3-axis handheld gimbal stabilizer for DSLR and mirrorless cameras weighing between 900g - 2kg. The EC1 offers unlimited 360° rotation along the yaw, pitch, and roll axes, and features an advanced 32-bit controller and 12-bit encoder system. The gimbal employs an adaptive PID algorithm to deliver stable rotation.

The EC1 offers three follow modes plus an auto-inversion mode that allows for upside down operation. Auto-inversion lets you use the gimbal with dual handle support systems like the ikan DGH. The EC1 also features a lock mode that sets the camera in a fixed position, and a point-and-lock mode that locks the position you hold the camera in for a few seconds. The EC1 also has an OLED display on the rear that confirms the selected mode of operation and provides battery life info.

The EC1 is designed with a quick-release baseplate that allows for convenient camera attachment and tool-less balancing. It also has a 1/4"-20 threaded mounting hole on the handle for attaching accessories for advanced setups, and a 3/8"-16 threaded mounting hole on the bottom for mounting onto a tripod, monopod, and other support gear.

The EC1 is supplied with three 18650 batteries that provide up to 3 hours of operating life. These batteries are rechargeable from within the EC1 using powerbank (not provided) or micro usb cable (not provided) and can also be charged using the provided Beholder charger.


Features:

- 360° Rotation Along All 3 Axes
- 32-Bit Controller & 12-Bit Encoder
- Adaptive PID Algorithm
- Supports Cameras between 2 - 4.5 lb
- Three Follow Modes Plus Auto-Inversion
- Lock Mode & Auto Point-and-Lock Mode
- Quick-Release Baseplate
- OLED Display
- 3/8"-16 Tripod Mount Threaded Hole
- 1/4"-20 Accessory Mount Threaded Hole


Start shooting video like a pro in seconds with your Camera! Full stabilization provides smooth and professional video quality without abrupt jerking!

Specifications:

- Model: EC1 3-axis single hand-held gyroscope stabilizer
- Load Capacity: 2000 g
- Battery: 18650 3.7v 2600mah * 3
- Battery Operating Time: Approx. 3-4 hours
- Battery Charging Time: Approx. 3-4 hours
- Working temperature: -10 to 70 degrees Celsius
- Pan: 360 °
- Roll: 360 °
- Pitch: 360 °
- Tripod Mounting Thread: 3/8"
- Accessory Mounting Threads: 1 x 1/4"
- Length: 360 mm
- Width: 184 mm
- Height: 79 mm
- Weight: 2.6 lb (1.2 kg)
- Camera Support:
Canon: 5D / 6D / 7D + 16-35 f4.0 / f2.8,24-105 f4.0,24-70
Mirror-less, bridge and compact camera: A6300, A7 Series + 24-70 / 16-35, GH4 +12-35 / 14-40 / 7-14,RX100, LX100
- Product weight (without camera): 2.6lb(1.2kg)
- Package weight: 4.8lb(2.2kg)
- Packing Size: 42X22.5X10cm
- Working angles: (360° no limit)

Items included:

- 1 x BeHolder EC1 Handheld Camera Gimbal Stabilizer
- 1 x Battery Cap with 3/8"-16 Mount
- 1 x Battery Holder
- 1 x Battery Charger
- 3 x 18650 Battery
- 1 x Quick Release Plate
- 1 x Travel Case
- 1 x Travel Case Shoulder Strap

 

[7daydeal]

Price adjusted (Discount as much as 20%).

 

[7daydeal]

(12) Zhiyun Smooth Q 3-Axis Electronic Handheld Gimbal Stabilizer (Stabilizing brushless Gimbal for 6.5 inch and below Smartphone and adapter for GoPro Hero 3, 3+, 4, 5, GoCam sjcam Sj5000 xiaoyi Action Camera) (Buy at $229)

You can now order the Zhiyun Smooth Q in our website at http://www.7daysdeals.com/zhiyun-stabilizer.


Optional accessories:

(1) GoPro Hero 3/3+/4 Adapter - $40

(2) GoPro Hero 5 Adapter - $39



1 Year Singapore Zhiyun's Agent Warranty



Cash and carry at our store at


7daydeal.com
Parklane Shopping Mall,
#02-16,
35 Selegie Road,
Singapore 188307

. Mon-Sat (12-8pm)
. Sun & Public Holiday (12-6pm)


www.7daydeal.com

Tel: 92381402 / 91990878



Posting if required is FREE. Delivery usually takes 1-3 working days.


For posting option, please order through our website or bank transfer the total amount to DBS Current Account 033-903093-7 and Sms/Whatsapp me the screen shot of the payment, name and delivery address.



PRODUCT INFORMATION:

Zhiyun Smooth series gimbal for smartphone has been favored and high-praised among the users since released. We globally absorbed advice from thousands of fans, made sweeping improvement and released the latest and improved model of smartphone gimbal, Smooth Q.

Smooth Q adds more considerate designs and focuses on user experiences. More up-to-date functions: 10 hours prolonged usage, special designed APP, face and object tracking, time lapse, Bluetooth remote control, shooting while charging, vertical & horizontal shooting and panorama mode. With Smooth Q, everyone can be a professional photographer.


With the GoPro adapter you can use now use your GoPro action camera with the Zhiyun Smooth Q.

There is no second chance or second take for capturing a precious video moment. Zhiyun allows you to nail it the first time of taking or your money back guaranteed !!!


Key Features at a glance:

- USB power output for mobile or accessory charging
- Remote zooming control through the stabiliser handle
- 12 hour battery
- Features the 5th Gen. Instune algorithmic system with 40% increase in torque
- Compatible with smartphones of sizes within 6.0".
- Unique extendable arm for toolless balancing
- Two-way mobile clamp for easy bi-directional (vertical and horizontal) mounting
- Supports max. payload of 220g allowing lens add-ons
- Auto object tracking and time-lapse capabilities with multi-style filter options
- 450g ultra light and compact construction
- Ergonomically constructed with special made high molecular compound material
- Built-in rechargeable 18650x2 Li-ion battery with mobile power supply.

Performance Breakthroughs:

- The Smooth-Q realizes 30% improvement in gimbal response speed and 40% increase in motor torque compared to its predecessors, which before Smooth-Q came out, had been ranked TOP in the industry for their outstanding stabilizing performance and durability.

- The Smooth-Q is compactly constructed with built-in batteries supporting up to 12-hour runtime. It is the 1st stabilizer in the world to offer a 5V/2000mA power output for charging of external devices, such as a smartphone or light-compensating lamp.

- It weighs only 440g while supporting a payload of up to 220g in max. This means that in addition to a PLUS-size smartphone, users can put more add-ons to it according to their needs, such as external lenses, allowing more extensive applications. In this way, it literally turns a smartphone into a professional digital camera, creating high-quality footage like no others can do.

- Moreover, in connection with a dedicated app, ZY Play, the Smooth-Q makes it super easy to shoot, edit and share your life moments anywhere anytime, featuring multiple intelligent controls, such as instant manual zooming, object tracking, panoramic imaging, time lapse and more.


Ultra-light, fast and powerful, the new generation 3-axis Smooth-Q smartphone stabilizer from Zhiyun makes every clip you capture smooth and steady. Compactly constructed with a built-in long-life 12-hour battery yet still weighs in at only 450g. With its unique tool-less extendable arm design, users can easy balance the gimbal for a large range of phones, including modern plus-sized iPhones and smartphones. This extendable arm enables to use of various add-ons such as external lenses, lights and microphones.

On top of the mechanical stabilisation, Zhiyun has developed and launched the ZY Play app to take advantage of the zoom control, object tracking and other exciting new features.

Your smartphone is now a professional motion camera that comes in 4 fashionable colours. Jet Black, Gold, Rose Gold and Space Gray.



Support smartphones

Model: Almost all smartphones
Maximum smartphone width: 81.5mm (Maximum mount stretching width）
Minimum smartphone width: 55mm (Minimum mount stretching width）


Suitable for GoPro Hero 3 & 4 & 5 (with optional adapter) and Smartphone:

iPhone 5, 5s, 6, 6s, 6 Plus, 6s Plus, SE, 7, 7 Plus

Samsung Galaxy S3, S4, S5, S6, S7, S8, Edge, Note 2, 3, 4, 5, 6, 7, 8

LG Optimus G2, G3, G4, G5, G6, V2, V3, V10

Sony Xperia Z1, Z2, Z3, Z4, Z5, Z6

Xiaomi or Redmi

Package Included:


- Zhiyun Smooth Q Stabilizer
- Protective Zip Case
- Micro USB cable for charging/upgrading firmware
- Instruction manual