The ARTWORKFOTO camera slider is made of aluminum alloy and has just under 28" of linear movement end to end.
The slider's sliding carriage has a 3/8"-16 male thread, the standard for mounting tripod heads. The carriage has a locking knob as well as a bubble level.
It also features adjustable legs that allow you to level the slider when placed on uneven surfaces. The slider's legs lock into place securely, assuring you that their will be no slipping. The legs also have adjustable feet that extend or retract for fine tuning.
It has an offset plate used for mounting onto a tripod. It also features additional threads for mounting the slider across two tripods or for mounting the slider vertically. Please see below for more specifications on the location of the threads.
The slider is rugged piece of equipment that will bring a professional touch to all of your work.
Location of Mounting Threads:
This offset plate has four (4) 1/4"-20 female threads and one (1) 3/8"-16 female thread. The slider has additional mounting threads on either end of the slider. It has six (6) 1/4"-20 female threads and one (1) 3/8"-16 female thread on either end of the slider underneath the the support for the terrain legs. It also has one (1) 1/4"-20 female thread and one (1) 3/8"-16 female thread on either end to allow for vertical mounting.
Material: Aluminum Alloy
Nominal Weight: 4.9 lbs / 2223 grams
Nominal Dimesions: 31" x 7.75" x 3.5"
Maximum Load: 33 lbs / 15kgs
