Peak design strap with E-M1mk2

[iguoh]

I hope everyone is doing ok during this difficult time. I recently ordered a Peak Design Slide Lite strap to be used with my E-M1mk2. I am curious how people attach the strap to the camera. Do you remove the D-ring (or whatever you call it) from the lug first and attach the anchor links directly to the lugs or do you simply just attach it to the D-ring?

 

[Octarine]

From my experience with an old camera body that also had D rings (or, as triangle) I would recommend leaving them in place and pull the PD anchors through these D rings. The two strings from the PD anchors need some space and the metal eyelet at the camera body might be too tight for that.

 

[iguoh]

From my experience with an old camera body that also had D rings (or, as triangle) I would recommend leaving them in place and pull the PD anchors through these D rings. The two strings from the PD anchors need some space and the metal eyelet at the camera body might be too tight for that.

Thanks @Octarine. I will leave the D-rings there then.