how to reduce/eliminate harsh shadow even with stofen OB?


Status
Not open for further replies.

ST_sg

New Member
Mar 23, 2004
1,654
0
0
sunnytang.zenfolio.com
#1
I find that, most of the time, with my external flash (420ex - last time), (SB-600 current system) did cast deep shadow of the subject, although I'd tilted the flash head 60 degree up with stofen OB on. :confused:

One of the reason might due to the subject quite near to the wall (< 3 meters) ... however, is there solution to this situation? :think:

All input welcome :)

Thanks in advance.
 

ortega

Moderator
Staff member
Nov 2, 2004
23,694
10
38
Singapore, Singapore, Singapor
#2
if you are shooting indoors with a low white ceiling, just chuck the OB and point the flash head up. Bounce from the ceiling. Try it out.
 

HeWolf

New Member
Feb 25, 2003
389
0
0
50
Punggol 21
Visit site
#3
Personally, for indoor with low white ceiling (typical hdb flat), I'll point the flash up without even a bounce card (or may be with a very small one).

The shadow, especially below chin, will be very natural.
 

sriram

New Member
Mar 10, 2002
1,253
0
0
#4
I've found the stofen almost useless. It's hardly any better than shooting straight flash. When shooting indoors, I bounce the flash off the walls or ceiling. The difference is huge compared to direct flash or omnibounce.
 

user111

Senior Member
Jul 27, 2004
4,702
0
36
#6
some bit of shadow wont die.

i shoot with omnibounce straight on
 

Witness

Senior Member
Mar 18, 2004
6,943
0
36
34
www.maverickatwork.com
#7
OB help make the flash coverage wider and not so harsh only lo...really wanna reduce shadow near wall i tink best is juz point up and use bounce card... together with OB..

still waiting for lightsphere...
haiz...

cheers..
 

snowspeeder

Senior Member
Feb 16, 2004
3,672
0
36
www.themenatwork.com
#8
The thing is if u use the stofen omnibounce, there will still be some direct light (even when u set to an angle) to the subject as the 'omnibounce' literally shoots light in all directions.
Another way to really eliminate shadows is using slave flashes.
 

Del_CtrlnoAlt

Senior Member
Feb 15, 2003
16,268
0
0
Outside the Dry Box.
Visit site
#9
i think his problem is on the background... like he said the subject is near a wall, unless the wall is made of material that can reflect/diffuse light, like canvas or polyester (depends on the light source as well), otherwise shadow will still be there... esp concrete wall with paint / wallpaper...

anyway to counter this, if using straight on, think its best to use a softbox... can make your own using tracing paper, or buy the lumiquest ones..

another point to say is... omnibouce is not really a miracle, it only reduce, not eliminate... any flash/ diffuser watever, if u place the flash just before the subject & lying on the background... imho impossible not to get shadows (unless there is an equal amount of light from behind... but thats when you need a super fast shutter, else u will see nothing)
 

ST_sg

New Member
Mar 23, 2004
1,654
0
0
sunnytang.zenfolio.com
#10
ya... mainly shooting my kids in house.. sometime the shadow is quite bad cast on the wall..

I was also thinking putting another SB-600 as slave flash to fill the background might help...

btw, is there any place sells those backdrop, normal room height (probably I only need plain color eg. Striky Yellow, Full white, Full black)? .. hehehe... a mini studio like setup :think:

(My PS skill not good in removing backgroud) :cry:

Thanks.
 

jimtong

Senior Member
May 8, 2002
1,528
0
36
Singapore
jimmyto.ng
#11
The hashness of the shadow also got to do with the distance of the subject to the wall. Like the rest have mentioned, just tilt your flash up towards the ceiling w/o OB. The ceiling is the best softbox, no need OB. Another point to note is try not to place your subject too near the wall.
 

catchlights

Moderator
Staff member
Sep 27, 2004
21,903
46
48
Punggol, Singapore
www.foto-u.com
#12
ST_sg said:
ya... mainly shooting my kids in house.. sometime the shadow is quite bad cast on the wall..

I was also thinking putting another SB-600 as slave flash to fill the background might help...

btw, is there any place sells those backdrop, normal room height (probably I only need plain color eg. Striky Yellow, Full white, Full black)? .. hehehe... a mini studio like setup :think:

(My PS skill not good in removing backgroud) :cry:

Thanks.
Omnibounce give you a bare bulb effect, so the subject still will cast a light shadow on the wall if the subject is close enough, if you want a very soft shadow, better off with a ceiling bounce, some people complaint about ceiling bounce with give the subject a raccoon eye effect is because the camera and flash to close to the subject, the light come down just like noon day sun.

If you not sure about lighting, to set up another light is to create another set of shadow, and mostly is unwanted shadow.

Btw, are you talking about shooting vertical orientation with omnibouce?
 

ortega

Moderator
Staff member
Nov 2, 2004
23,694
10
38
Singapore, Singapore, Singapor
#13
b4 you start buying more stuff, give the ceiling bounce a try first.

the distance of the subject to the wall can be rearranged what?
Don't need to buy special material bg.

you can try coloured cloth or king sized bedsheet (flat not fitted)
ikea is having a sale you know?
 

bigmouse

New Member
Jul 10, 2003
604
0
0
spore
img9.photobucket.com
#14
After bounce ceiling, and everything still have harsh shadow, then I think try play around with setting :

1) Higher ISO with acceptable noise. Less flash power from flash to get proper exposure---> less shadow from flash.

2) Slower shutter speed without shake----> more ambient light---> less flash shadow

3) bigger aperture just nice for your subject --> as in 2.

Me newbie also... Don't complaint lah. At least u have a ext flash. I don't .
 

Del_CtrlnoAlt

Senior Member
Feb 15, 2003
16,268
0
0
Outside the Dry Box.
Visit site
#15
bigmouse... sometimes aperture/shutter/iso can't replace flash... likewise flash can't replace either 1 of them... they all give different effects to the picture... (btw, no matter how slow shutter or open aperture, i think when you use flash at minimum, shadow will still be the same if the person stand near the wall)
 

ortega

Moderator
Staff member
Nov 2, 2004
23,694
10
38
Singapore, Singapore, Singapor
#18
room too small? not that bad until must stand against the wall what?
Using the storeroom as a studio?

Photographer can still stand outside of the room and shoot through the door or window. Flash can still be placed in the room and triggered remotely.

ha ha you live up to your nick, Del Ctr, no alt.
 

ortega

Moderator
Staff member
Nov 2, 2004
23,694
10
38
Singapore, Singapore, Singapor
#19
actually thinking back, I even shoot inside a HDB lift without strong shadows, 4 people in the lift somemore. The room cannot be smaller that the lift! Even the smallest room the toilet, is begger that the lift.
 

Del_CtrlnoAlt

Senior Member
Feb 15, 2003
16,268
0
0
Outside the Dry Box.
Visit site
#20
ortega said:
room too small? not that bad until must stand against the wall what?
Using the storeroom as a studio?

Photographer can still stand outside of the room and shoot through the door or window. Flash can still be placed in the room and triggered remotely.

ha ha you live up to your nick, Del Ctr, no alt.
:think: hehe... but den again... no shadows ar? think 1/2 body shots ok, full body shots, take from small room abit hard... maybe like i said b4... my skills still very bad compared to yours... still no time to meet you to impart me the no see shoot skill... ;)

Delete = Shoot not nice... Delete
Control = Must adjust all modes to the perfect... even subject details...
NO ALTERNATIVES! ;p
 

Status
Not open for further replies.
Top Bottom