What is the easiest way to achieve Bokeh using LX3
- Thread starter isaac976
- Start date
Set F to 2.0 ~ 2.8 RANGE
your subject should be a bit nearer to your camera. (not sure if you know what i mean)
if you wan super bokeh, LX3 cant create but normal bokeh DOF .... LX3 is doing good with it.
Just for fun shot:
(1) The focus is on the grapes whereas background is blurred should be the DOF or bokeh u looking for.
(2) The focus is at the grill whereas the background is blurred ...
Last edited:
i've tried bokeh on my own watch
but u got to be really close up to get the blurred effect
http://www.flickr.com/photos/12745521@N03/?saved=1
but u got to be really close up to get the blurred effect
http://www.flickr.com/photos/12745521@N03/?saved=1
i think got to be very close bah
for my case i still trying portrait bokeh.
sometimes can sometimes cannot
for my case i still trying portrait bokeh.
sometimes can sometimes cannot
Is this good???
http://www.flickr.com/photos/14354418@N02/4469888258/in/set-72157622948262665/
I used an attached macro lens (52mm) that came with the wide angle...and on top of that the camera macro setting.
I used an attached macro lens (52mm) that came with the wide angle...and on top of that the camera macro setting.
getting more bg oof can be done with 3 ways.
1) increase focal length
2) open up aperture
3) increase background to camera distance relative to subject distance, or you can minimise subject distance relative to background-camera distance.
1) increase focal length
2) open up aperture
3) increase background to camera distance relative to subject distance, or you can minimise subject distance relative to background-camera distance.
the wide angle I got is the cheapo one from pandabase. it was good for start/play around. the opteka shud be better.
to TS..come to think of it ...maybe by changing the focus to spot may help constrain the focus area.
Similar threads
