Tamron 28-75 f2.8 part identify help?


Feb 17, 2013
1
0
0
28
arlington, texas
#1
So my lens is not making any connection to my camera. So i decided to open it up to check it out, then i realize this cable is broken.
But i cant seem to find the cable for it online.. i had search for it under "tamron 28-75 flex cable....etc" but nothing. Can anyone here help me plz?

if you have this part for sale, i would like to buy it from you.


Tamron 28-75 f2.8 model "AN09" first gen with non build in focus motor. (i use this on my d90)
 

Last edited:

fatigue

Senior Member
Sep 26, 2005
2,924
14
38
50
Blk138 Bedok North Ave3
forums.clubsnap.org
#2
It's a bit strange that the flexible cable was damaged on this lens. It doesn't gets damaged easily since the application is not a moving part.
Unlike those flexible cable used in aperture mechanism, cable gets damaged due movement of aperture assembly as you zoom in and out.

I suspect the cable was damaged after you tried to open the lens.
The trick is to first remove the baffle, then remove the contact pin connector, then you can safely remove the metal mount.

Since there's no demand, no third party cable maker would make and sell that cable. It would be very difficult to get this cable.
If you can't find the flexible cable, another option is to reconnect the damage lines.
It can be done by soldering a thin wire on the flexible cable.
Then apply an epoxy to serve as an insulation.

Some soldering skills required ;)








 

Last edited:
Top Bottom