sirui rubber replacements


#1
Hi fellas, my trusty sirui traveller tripod has served me well and the rubber parts are quite loose. Especially those on the turning knobs on the head. everywhere else is fine.

Any idea where i can get it replaced or repaired?
 

shierwin

Senior Member
Dec 29, 2008
3,428
8
38
East Coast
#2
Go down to TK Foto, now at Plaza Singapura (if I remember correctly)
 

SkyStrike

Moderator
Staff member
Nov 29, 2010
3,444
11
38
Somewhere
#3
one of the fastest way to fix this is
1) remove the rubber ring first (just slide it out),
2) give the rubber and the metal part a good wipe to remove all the oily stuffs
3) apply a double sided tape on the metal part
4) put the rubber back...

At least this was how TK fixed the problem for me.
 

#4
one of the fastest way to fix this is
1) remove the rubber ring first (just slide it out),
2) give the rubber and the metal part a good wipe to remove all the oily stuffs
3) apply a double sided tape on the metal part
4) put the rubber back...

At least this was how TK fixed the problem for me.
thanks, seems like a easy enough diy fix.