Q: MACRO 對焦開關,不過原廠設定只能在 200-300 使用(當然是可以破解啦)
Translate: Macro focus switch. Can only be use on 200-300 default factory settings (Can be cracked!)
A: 開Macro, 暴力的向70mm一扭
Translte: Enable Macro. Use slight force and turn it towards 70mm
Caution: 這支的破解法的確是這樣, 不過有的鏡頭可能會很難轉
Translate: Its indeed cracked this way but some lens are hard to turn.
Source: Mobile 01
Source 2: xitek forum
I've gave it a try. It works! Now its the same as the 28-300 with full range macro!!! :bsmilie:
P.S. I shall not hold any responsible if your lens is damage whilst doing this!
Translate: Macro focus switch. Can only be use on 200-300 default factory settings (Can be cracked!)
A: 開Macro, 暴力的向70mm一扭
Translte: Enable Macro. Use slight force and turn it towards 70mm
Caution: 這支的破解法的確是這樣, 不過有的鏡頭可能會很難轉
Translate: Its indeed cracked this way but some lens are hard to turn.
Source: Mobile 01
Source 2: xitek forum
I've gave it a try. It works! Now its the same as the 28-300 with full range macro!!! :bsmilie:
P.S. I shall not hold any responsible if your lens is damage whilst doing this!