Linksys WAP11 ver 2.2


Status
Not open for further replies.

rty

Senior Member
Jan 19, 2002
1,166
0
36
Singapore
#1
I upgraded the Linksys Wireless Access Point firmware to 1.1 and the WAP11 access stops functioning. Anyone ever encountered the same experience and know the cure? :cry:
 

mervlam

Senior Member
Apr 26, 2002
2,279
0
0
Visit site
#2
Originally posted by rty
I upgraded the Linksys Wireless Access Point firmware to 1.1 and the WAP11 access stops functioning. Anyone ever encountered the same experience and know the cure? :cry:
one thing i can say: jialat liao

Know someone with same prob, dunno how to solve. :dunno:
 

Jason Ho

Senior Member
Jan 17, 2002
2,251
0
36
46
jasonho.clubsnap.org
#3
Originally posted by rty
I upgraded the Linksys Wireless Access Point firmware to 1.1 and the WAP11 access stops functioning. Anyone ever encountered the same experience and know the cure? :cry:
How about bringing it back to LinkSys service center?
 

rty

Senior Member
Jan 19, 2002
1,166
0
36
Singapore
#5
Originally posted by cyanbloodbane
have you tried hard resetting the AP?
Yes, I have. Pressed the reset button. I even powered it off.

:bheart:
 

pcman

New Member
Jan 23, 2003
209
0
0
51
Singapore
Visit site
#6
RTY, why not perform a hardware reset. Enter to the config page using the factory default IP address. Once you get in, reconfig your setting to your previous choice. I suspect once you upgrade your firmware, all setting back to default. Hope this helped.



Originally posted by rty
I upgraded the Linksys Wireless Access Point firmware to 1.1 and the WAP11 access stops functioning. Anyone ever encountered the same experience and know the cure? :cry:
 

rty

Senior Member
Jan 19, 2002
1,166
0
36
Singapore
#7
Problem solved! :gbounce:

I did some searches on the web and found few links on hacking the Linksys AP WAP11 2.2 to turn it into D-LINK DWL-900AP+. After the hack, it works like a charm now! Yes, the warranty is now void.

pcman, pressing hardware reset button won't help restoring the firmware.
 

Status
Not open for further replies.
Top Bottom