Lenses and Filters for Home aquarium photography


Mar 27, 2011
87
0
6
#1
I recently took some macro shots of my fire shrimps at home. Realised that it was a back-breaking experience for me to hold and move tripod and manual focus...
Have since sold the macro lens (100mm nonL 2.8 Canon) away. It was fun but I doubt I would like to continue

Of all the shots only one looked decent... terrible beginner .... Will try to post it when I reach home later.

Other than that, I would like to ask, for a 'whole' aquarium shot like those in Aquarama/Amano websites, what equipment do I need to show a clean and nice surface. I tried searching on the topic but found none. It always seems to overexpose and details not captured.

I currently have 17-55mm 15-85mm on a 7D. I also have CPL and a 580exii. What other equipment/setting do i need for this 'shoot'.

Thanks in advance for all the advices.
 

ryanlio

New Member
Nov 27, 2012
538
0
0
41
singapore
#2
Cool.. Am in marine aquarium as well . Look forward to your posts
 

Schmike

New Member
Dec 22, 2007
791
1
0
#3
Tripod is useless when the subjects are moving all the time. You need a fast shutter speed of at least 1/100-1/250. My usual settings are ISO 100, F8-13, 1/100 or faster.

Full tank shots are quite easy.
  1. Use as much light as you have for the tank.
  2. Add on with flash(es) (depending on tank size and preference) triggered with wireless transmitter.
  3. Make sure tank surface (both interior and exterior) are clean.

The same applies to shooting your subjects. Another way is to attach a round lens hood and stick it onto the tank surface when you are taking shots of your subjects to remove reflections.


If the interior of the tank is bright enough, you don't need any CPL. CPL is useful for ponds to cut out reflections under a sunny day.

Fully covered tanks like those in Aquarama is another problem. Especially those smaller tanks that are behind the wooden boards.
 

Last edited:

Schmike

New Member
Dec 22, 2007
791
1
0
#4
Going through my shots from Aquarama. A problem I see is water stains on the tank surface appearing on my shots. :(

You won't have the rights to clean the tank unless you are the owner of the fish or an authorized personnel.
 

Last edited:
Mar 27, 2011
87
0
6
#5
I m looking at taking frontal tank shots. Seems the glass really makes things a little distorted. Flash? Wont there be reflections?
Also i'm into freshwater tanks. :)
 

Schmike

New Member
Dec 22, 2007
791
1
0
#6
Flash(es) in front of the tank will depends on how you place it/them. I usually place the flashe(es) above the tank. I took the fishes at Aquarama with flashes in front of the tanks. Only manage to take few shrimps with flash above as the tank was not covered.

The ones behind the wooden frames are much harder to take as there will still be reflections of the ledge if the fish is near the front.

Full tank shots is usually 2-3 flashes above the tank for me. If taking planted or aquascape, you can use a tripod and use a slightly longer shutter speed.

Avoid taking at an angle to reduce distortion.
 

nulbonklr

New Member
Dec 1, 2007
267
0
0
www.facebook.com
#7
I recently took some macro shots of my fire shrimps at home. Realised that it was a back-breaking experience for me to hold and move tripod and manual focus...
Have since sold the macro lens (100mm nonL 2.8 Canon) away. It was fun but I doubt I would like to continue

Of all the shots only one looked decent... terrible beginner .... Will try to post it when I reach home later.

Other than that, I would like to ask, for a 'whole' aquarium shot like those in Aquarama/Amano websites, what equipment do I need to show a clean and nice surface. I tried searching on the topic but found none. It always seems to overexpose and details not captured.

I currently have 17-55mm 15-85mm on a 7D. I also have CPL and a 580exii. What other equipment/setting do i need for this 'shoot'.

Thanks in advance for all the advices.
Took these a few years back for fun.



Shot using SB600 infra sync with cam using pop up flash. Switch off all lights, modify a card board to block the pop up flash to cut off reflections on the tank. SB600 on top of tank.

If you've got a wireless flash trigger, it'll be much easier.

Hope this helps.
 

Last edited:

seii7

New Member
Aug 7, 2010
175
0
0
#8
How about shooting at night or in completely dark room with only the tank lighted?
Any additional external light will be reflected onto the photo
 

Mar 27, 2011
87
0
6
#9
Ah, I understand what you guys mean now by placing flash above the water surface. 7D can trigger 580exii wirelessly. Just wondering, wont the lights above the tank be sufficient? My lights are pretty solid.
 

nulbonklr

New Member
Dec 1, 2007
267
0
0
www.facebook.com
#10
Ah, I understand what you guys mean now by placing flash above the water surface. 7D can trigger 580exii wirelessly. Just wondering, wont the lights above the tank be sufficient? My lights are pretty solid.
Base on the current camera technology, existing lights in the tank should be sufficient.
 

Last edited:

Schmike

New Member
Dec 22, 2007
791
1
0
#11
How about shooting at night or in completely dark room with only the tank lighted?
Any additional external light will be reflected onto the photo
This is what I used to do. But I still have to push up my ISO quite high.

Base on the current camera technology, existing lights in the tank should be sufficient.
Lighiting have nothing to do with camera technology. The higher the ISO you use, the more light you can get into the picture. But this also means more reflections from outside the tank.

Shots taken at Aquarama of the same fish:

With flash:

IMG_3670 by Edwin Tan (Schmike), on Flickr

Aperture: f/10.0
Exposure Time: 0.0080 s (1/125)
ISO equiv: 100
Flash Fired: Yes (Auto, return light detected)

Without flash:

IMG_3802 by Edwin Tan (Schmike), on Flickr

Aperture: f/5.6
Exposure Time: 0.010 s (1/100)
ISO equiv: 800
Flash Fired: No (enforced)

Even with flash, at times I still get a little reflection on the tank surface as the flash is not above the tank.


IMG_3629 by Edwin Tan (Schmike), on Flickr
 

nulbonklr

New Member
Dec 1, 2007
267
0
0
www.facebook.com
#12
Lighiting have nothing to do with camera technology. The higher the ISO you use, the more light you can get into the picture. But this also means more reflections from outside the tank.
True, but previously I shot using D80, so shooting without flash was not an option. But if TS tank's lighting is adequate, with his current system, should be suffice without flash.
 

Schmike

New Member
Dec 22, 2007
791
1
0
#13
If lighting is sufficient, a simple PNS can produce good shots. :)

One thing to note, the interior of the tank must always be much brighter than the surrounding.
 

Last edited:

nulbonklr

New Member
Dec 1, 2007
267
0
0
www.facebook.com
#14

Foxshade

New Member
Jun 26, 2009
849
3
0
46
In cat's stomach
#15
I tried shooting into aquarium once while loitering around in the bride's hse.
Maybe the fish tank lighting is very good that I can afford shooting it with a 50 mm f/1.8.



The only change to the environment I made was turning off the room light and draw the curtain to minimize reflection since I got no polarizer.
 

Last edited:

ed9119

Moderator
Staff member
Mar 11, 2002
11,014
38
48
56
Singapore
www.walkeast.com
#16
I did it before

Turn off all lights except aquarium lights
Even wear black or dark clothes
strobes with diffusers left and right and from top with triggers or existing tank lights depending on situation
build a dark cardboard light-blocker around all 4 sides of tank

adjust strobes accordingly (i got by with 1/8 and 1/16 output)

otherwise quick and dirty way is to just place constant output LED lights top of tank and turn off all lights
 

Mar 27, 2011
87
0
6
#17
My lights are already LED lights. :)
I will try the cardboard around the tank thingy. Sounds good.
I will try one shot this weekend and if possible, post it here.
 

Schmike

New Member
Dec 22, 2007
791
1
0
#18
How deep is the tank?

Another way is to use a black cloth to cover up the front of the tank towards your lens.
 

Last edited:

d2xpeter

Deregistered
Dec 6, 2012
1,283
4
0
55
singapore
#19
this was done with a simple p&s nikon E3100.
Room's light turn off

 

Top Bottom