How to utilise this scale?

Status
Not open for further replies.

two200

New Member
Does anyone knows how to utilise this scale? I read somewhere in the forum about its use to estimate the hyperfocal length but can't seem to find it anymore. Thought it will be useful to know. Thanks

Diavonex

Senior Member
Does anyone knows how to utilise this scale? I read somewhere in the forum about its use to estimate the hyperfocal length but can't seem to find it anymore. Thought it will be useful to know. Thanks...
This scale tells you the depth of field.

Base on the picture, if you focus at 0.6m and use an aperture of F22, anything from 0.4m to infinity will be sharp.

Last edited:

two200

New Member
This scale tells you the depth of field.

Base on the picture, if you focus at 0.6m and use an aperture of F22, anything from 0.4m to infinity will be sharp.

Need to clarify tho. 0.6m is taken from the white vertical line? F22 is from the L-shaped line with infinity symbol? But where does the 0.4m come from? :think:

Daedalus Trent

Senior Member
This scale tells you the depth of field.

Base on the picture, if you focus at 0.6m and use an aperture of F22, anything from 0.4m to infinity will be sharp.
:bsmilie:

finally i get it

Thanks!

ziploc

New Member

Need to clarify tho. 0.6m is taken from the white vertical line? F22 is from the L-shaped line with infinity symbol? But where does the 0.4m come from? :think:
From the f/22 at the other end of the scale.

See here for a good guide on hyperfocal distance.

Last edited:

Diavonex

Senior Member

Need to clarify tho. 0.6m is taken from the white vertical line? F22 is from the L-shaped line with infinity symbol? But where does the 0.4m come from? :think:
Yes.

Any thing between 0.3 and 0.5 must be 0.4 (estimate); that's the area infront of the F22 on the left.

ziploc

New Member
You're welcome.

Btw, here is how I would normally use the scale:

1. Choose an aperture, e.g. f/16.
2. Set manual focus mode, and turn the focusing ring so that the infinity mark aligns with the choosen aperture, f/16 in this case.
3. The center mark indicates where the focus is at, but this is for info only and you don't need to care about it.
4. The distance marking falling on f/16 at the other end is where the nearest point of which it will be in focus. Check that this is what you desire. If not, choose another aperture. and repeat from step 1.
5. Compose and shoot.

Using your lens as an example: focus and set the infinity mark to f/16, the hyperfocusing range would be ~0.5m-infinity, and the focusing point is ~1m.

Some lenses do not have any DOF scale on them. For those lenses you would need to use the hyperfocusing charts/wheel available on the DOFMaster website.

two200

New Member
You're welcome.

Btw, here is how I would normally use the scale:

1. Choose an aperture, e.g. f/16.
2. Set manual focus mode, and turn the focusing ring so that the infinity mark aligns with the choosen aperture, f/16 in this case.
3. The center mark indicates where the focus is at, but this is for info only and you don't need to care about it.
4. The distance marking falling on f/16 at the other end is where the nearest point of which it will be in focus. Check that this is what you desire. If not, choose another aperture. and repeat from step 1.
5. Compose and shoot.

Using your lens as an example: focus and set the infinity mark to f/16, the hyperfocusing range would be ~0.5m-infinity, and the focusing point is ~1m.

Some lenses do not have any DOF scale on them. For those lenses you would need to use the hyperfocusing charts/wheel available on the DOFMaster website.
BTW what does the R mean in the picture?

watsup

Member
So from the picture, for F16 anything between ~0.45 to 5m will be sharp? Correct me if i am wrong.

two200

New Member
So from the picture, for F16 anything between ~0.45 to 5m will be sharp? Correct me if i am wrong.
From my understanding, yes if you focus about 1 m away.
....... But I'll let the experts have the final word

J-Chan

Senior Member
BTW what does the R mean in the picture?
Its the Infrared focus point I believe..

ziploc

New Member
BTW what does the R mean in the picture?
I have no idea what that "R" means. Maybe you could check out your lens' manual?

So from the picture, for F16 anything between ~0.45 to 5m will be sharp? Correct me if i am wrong.
From the pic, the lens is focusing at 2 ft. If you set aperture to f/16, the DOF range will be from 0.5 to 5 ft, and anything within this range will be considered sharp.

This is actually how we derive at the hyperfocal distance. Let's think back in reverse: if we want the DOF to be from some distance x to infinity, e.g. at aperture f/16, then we'll need x to be on one side of f/16 and infinity on the other side of f/16 (remember that's how we define DOF). So, we just set infinity to f/16, and we can find out what x, and the focusing point is. Interesting isn't it?

Last edited:

ziploc

New Member
Its the Infrared focus point I believe..
Oh yes that's right, you reminded me. That is the infrared focusing point.

New Member
wow... which lens is that? I've not seen that on the EF lenses I've been working on lol,
guess we entry grade DSLR users have it easy =)

J-Chan

Senior Member
I'm guessing the Sigma 30mm f/1.4, but does that matter?

New Member
not to stray off topic too much, but I was thinking of getting a sigma18-200 or tamron 18-270 VC next, so was wondering if that was a common feature on the sigma lens, and if so, probably learning how to use it would be best.