F1 Burnout


Status
Not open for further replies.
Nov 11, 2007
803
0
0
Singapore
www.flickr.com
#1
Shot this burnout of the F1 tyre marks from the Singapore pitlane. Surprisingly, all the tyre marks are still there. This shot was shot on a cloudy day (Saturday)

ISO-400, F13, 1/100 shutter, spot metering, manual mode. This picture has been enhanced to raise the brightness.




Comments required:

How to improve the sharpness of the shot while trying to raise the exposure level?
 

Last edited:
#2
What do you mean by improving the sharpness? Is it blurry? I can't really tell given the size of the image.

If it's blur due to handshake, more practice would help. Exiftool reports you shot this at 18mm? 1/100 at 18mm should be fine handheld.

If you need more DOF, try hyper focusing your lens, don't AF at infinity. I personally shoot alot of panos, and use a 16mm focused to 1.5m, F8. This gives me loads of DOF from 1.5m++ to infinity.

If you need to raise the exposure, applying +ve exposure compensation?

HTHs!

Alvin
 

Jul 14, 2007
1,291
0
0
600060
#4
1- I see the white patch of the sky, the bridge and the distant trees first BEFORE the tyre marks. Those may not be necessary.
2- Get lower down, if possible on the track itself JUST to show the tyre marks. Might be able to get a good bokeh, which would be nice.
 

Nov 11, 2007
803
0
0
Singapore
www.flickr.com
#5
1- I see the white patch of the sky, the bridge and the distant trees first BEFORE the tyre marks. Those may not be necessary.
2- Get lower down, if possible on the track itself JUST to show the tyre marks. Might be able to get a good bokeh, which would be nice.
I see thanks for pointing out.
 

Status
Not open for further replies.
Top Bottom