http://www.nikonusa.com/software/D70fw101/101/D70fw101.zip
1.Download and expand the firmware files
2.Format an approved CF card in the camera (do not use a Microdrive card to perform this update)
3.Connect Camera to computer (in MSC USB mode) or use a CF Card Reader (do not use a Lexar Jump Shot USB cable to perform this update)
4.Copy to the top level of the card the downloaded "A firmware" file
5.Disconnect camera from computer
6.Update the firmware from the "Setup" menu
7.Follow the camera's on-screen menus
8.Repeat steps 2 through 7 using the "B Firmware"
9.Re-format Card
You can only update one firmware at one time.If not sure U guys can go to this website.Hopefully can help! I am a newbie ,If I post wrongly pls dont get angry.
http://support.nikontech.com/cgi-bi...HZsMj01NiZwX2NhdF9sdmwxPTIzJnBfcGFnZT0x&p_li=
1.Download and expand the firmware files
2.Format an approved CF card in the camera (do not use a Microdrive card to perform this update)
3.Connect Camera to computer (in MSC USB mode) or use a CF Card Reader (do not use a Lexar Jump Shot USB cable to perform this update)
4.Copy to the top level of the card the downloaded "A firmware" file
5.Disconnect camera from computer
6.Update the firmware from the "Setup" menu
7.Follow the camera's on-screen menus
8.Repeat steps 2 through 7 using the "B Firmware"
9.Re-format Card
You can only update one firmware at one time.If not sure U guys can go to this website.Hopefully can help! I am a newbie ,If I post wrongly pls dont get angry.
http://support.nikontech.com/cgi-bi...HZsMj01NiZwX2NhdF9sdmwxPTIzJnBfcGFnZT0x&p_li=