Attention!!!!
New Product Release!!! ICode from Korea http://www.clubsnap.com/forums/showthread.php?t=762429
List Price SGD30. Right now with any purchase of AIPO Dry Cabinet, just add on SGD18, you can get any colour that you likes (Limited Stock)!!!
Hurry!!!
So you love photography, and your precious gear. How do you show your tender loving care to your camera and lens? No, you don't kiss them and say 'I love you' but hey, nobody's stopping you.
Whether it's a hobby or a profession, dSLRs don't come in cheap. And since photography is an optics game before anything else, the lens is easily the most important accessory for your camera. Most lens usually cost at least as much as the camera body. Hence taking care of your lens (and your camera of course) should be of utmost importance to the serious photographer.
Most rely on bags to protect their precious when out in the world. While bags are especially useful in storing camera gear on the go, they do not provide the necessary protection when not on the go. Bags do not protect against moisture caused by humidity, and because Singapore has a tropical climate, there is quite a lot of humidity to protect your gear from. But why exactly do we need to protect against humidity? We need to protect against fungus.
Fungus starts to grow on camera lens and components given the ideal circumstance. They do not just breed on our feet and cause athlete's foot or foot rot. That's just nasty by the way. Fungus growths on camera equipment can be detected only after 1-2 years of use, which is usually too late. In such cases, one needs to opt for lens cleaning services which are VERY expensive. These cleaning services also cause some level of deterioration on the lens.
As with diseases like H1N1: Prevent is better than cure. This applies to a lot of other things, camera care (and other gadgets for that matter) inclusive. And Say “NO” to Fungus.
Get yourself a dry cabinet for your photography equipment and keep your precious gear dry and fungus-free.
A Dry Cabinet, is a container box that keeps equipment dry. There are two types: analog and digital, the latter being a bit more expensive but a lot more convenient. And among the digital dry box brands, I would recommend looking for AIPO. This Taiwan-based company has had a long history of hi-tech manufacturing of damp-proof products, combining the design, development, production and sale into a whole.
The AIPO Dry Cabinet maintains a low humidity inside the cabinet. This helps prevent items from being damaged by mould, fungus, rust or absorbing moisture. The cabinet is ideal for the moisture-proof storage of photographic equipment and can save those expensive lens cleans. Can also be used to store CDs and any items of value vulnerable.
What is the different between Analog Controller and Digital Controller?
Some Brand - Analog Dry cabinet is using silica gel as their dehumidifier.
You can notice at the back of this kind of dry cabinet behind there is a silica gel module. This silica gel module is using to absorb moisture from internal dry cabinet.
After that, the module uses heater to heat it up the silica gel and vaporize the moisture go outside of dry cabinet. As we know the silicon gel has a life spend/ time. Performance of silica gel also will be decreasing after some months or year
In term of technical terms, dry cabinet controller can be classified into “Closed Loop” and “Open Loop”
“Closed Loop” which is used in the Digital Controller Dry Cabinet . The target RH is set at the front door (conveniently combined with the RH display) and the system will switch off once the target RH is reached. After opening the door (and increasing the RH) the system starts automatically till it reached target RH. That's what technicians call 'feedback loop'.
Analog controller is using open loop that does not have any feedback or automatic switch off. But they have a digital RH display as well. The aim here is to achieve the target RH by adjusting the "drying power" (output) of the condenser. One needs to find this point with a bit trial and error and the knob and that's where the complaints come from. Looking at the forums one can see that after some time most people get their dry cabinet to target RH and it's done. A few need repair, though.
AIPO Digital TE Cooling wafer condensation dehumidifying system is the most advanced among similar products in the world. It makes use of West-Germany-made sensors, multi-purpose CN microcomputer displays, and Taiwan-made electronic dehumidifying elements to solve the damp-proof problem for a great number of high-tech sophisticated equipment and made lots of special damp-proof instrument cabins.
It adopts the latest TE cooling wafer design. When the humidity in the cabinet (RH %) exceeds the setting value, the microcomputer will activate the cooling wafer automatically and moisture will be condensed and frosted immediately on a collecting board. When the humidity in the cabinet becomes lower than the setting value, the cooling wafer will be deactivated automatically. Then, the frost on the collecting board defreezes to water, which is absorbed and given off naturally when flowing through guide holes, thus achieving dehumidifcation effect.
It makes use of the cooling and thermal performance of semi-conductor wafers for raising its heat-sinking capability. It is characterized as energy saving, quiet operation, and rapid dehumidification.
Some brand in the market, they do use the battery with the display device. As we understand, keeping the battery in the device is not good. The high possible is the battery leakage problem. It will be obvious, in most cases, when a battery has started leaking--there will be corrosive fluid on the battery's exterior and on the surfaces of the battery compartment. There also may be an acidic or metallic smell
The interior electronics of the hyrometer in the cabinet can be damaged by battery leakage. Cleaning and disassembly, but this is very time-consuming and expensive. If comes to worse case, replacing the hyrometer may be the only sensible option. Disposal battery is not a environment friendly as well.
LED Light – “Think Beyond The Bulb”.
AIPO Dry Cabinet always wanted to provide a good product to the customer. Besides, we do consider on the environment friendly. Conjuction with “Singapore Environment Friend Campaign” we have lauched a new series of AIPO Dry Cabinet which comes with LED Light and Plastic Tray.
What is the advantages using LED light in the cabinet compare with Fluorecent light?
- LED Light is the most energy efficient under cabinet light fixture.
- A very low energy consumption level.
- The LED Task Light is the coolest to the touch.
- All of the fluorescent under cabinet lights give off very little heat and are very warm to the touch.
- That is why the fluorescent light is not suitable to place in the cabinet which keeps your expensive camera gadget.
- Without question the LEDs used in the LED Under Cabinet Task Light have the longest rated life at 50,000+ hours.
- The fluorescent light bulbs have a rated life of about 5.000 hours to 20,000 hours depending on the type of light bulb and the light fixture in which it's used
- Contains no mercury making it safer
There are 10 reasons why you choice AIPO Dry Cabinet
1) AIPO Dry Cabinet is a digital Dehumidify system C/W Digital Display.
2) No Battery needed
3) Not need First time seasoning
4) 5 Watts power Consume
5) Latest TE Technology
6) Automatic humidity control.
7) Digital display
8) 5 years Warranty
9) No thermal and no noise
10) Competitively priced and value for money.
You can place an order with :thumbsup:
AIPO Distributor Singapore (Ms. Mok)
AIPO Tech (Singapore)
CrazyPhotoDryCabinet@gmail.com OR AIPOTechSales@gmail.com
Tel: 9007 5682
AIPO Agents
TagoTech
http://www.tagotech.com
Do visit Shop AT
Alan Photo Trading
1 Rochor Canal Road
#01-38 Sim Lim Square, Singapore 188504
Contact No. : +(65) 6336 0922
Working hours : 10.30am to 8.30pm (Mon - Sat)
10.30am to 7.30pm (Sun)
Alan Photo Trading
109 North Bridge Road #02-07
FUNAN The IT Mall Singapore 179097
Contact No. : +(65) 6883 0922
Working hours : 10.30am to 8.30pm (Mon - Sat)
10.30am to 7.30pm (Sun)
Eastern Art Photo Store
No 1 North Bridge Road,
#03-10 High Street Centre
Singapore 179094
Tel: 6222 8213/4
Email: eaphotos@singnet.com.sg
Business Hours: Mon to Sat 9:00 AM - 630PM
The Camera corner
3 Coleman Street, #B1-14
Peninsula Shopping Centre
Tel:63386469
HP: 9686 3656 (Leslie)
K-13 Marketing
No 111, North Bridge Road,
#02-16 Penisula Plaza
Tel: 6336 6995, 6339 5330
HP: 9643 5908 (Tony Tan)
*More AIPO Agent is required. If interested carry product of AIPO, please do not hesitate to PM/contact me.
Last edited:
