Adapter + Filter combo for LX3 (advice needed)


Status
Not open for further replies.

mikki

New Member
Jun 29, 2009
20
0
0
#1
Hi Everyone,

Can anyone recommend a good UV and a good CPL filter to go with a pandabase adapter?

I was looking at the B+W thread but did not see 52mm filters except for a UV-Haze 010 MRC F-Pro which had stock.

I am also somewhat confused if that would be the filter to get along with a KSM CPL filter and if it would be stackable with no vignetting.

Please kindly advise.

Thanks!
 

Jun 9, 2009
213
0
16
Singapore
#2
Hi Everyone,

Can anyone recommend a good UV and a good CPL filter to go with a pandabase adapter?

I was looking at the B+W thread but did not see 52mm filters except for a UV-Haze 010 MRC F-Pro which had stock.

I am also somewhat confused if that would be the filter to get along with a KSM CPL filter and if it would be stackable with no vignetting.

Please kindly advise.

Thanks!
I am not sure what KSM is but here are the links of the other filters that I've seen on B+W website.

http://www.schneideroptics.com/ecommerce/CatalogItemDetail.aspx?CID=1196&IID=6381
http://www.schneideroptics.com/ecommerce/CatalogItemDetail.aspx?CID=257&IID=3999
http://www.schneideroptics.com/ecommerce/CatalogItemDetail.aspx?CID=257&IID=5663

You can try asking one of the Mass Order forum in Mass Sales. They may be able to order for you.
 

mikki

New Member
Jun 29, 2009
20
0
0
#3
KSM - Kasemann (spelling?) It is suppose to be one of the best around and thought I would get it since I have to spend the money.
 

mikki

New Member
Jun 29, 2009
20
0
0
#4
Could any experienced user kindly educate me if the combination I mentioned, be optimal?

Thank you ! :)
 

Status
Not open for further replies.
Top Bottom