10th October 2004, 07:28 PM
My calibrated monitors look pinkish.. Is this correct?
Hi there all!
Got a Eye-One Display, and calibrated all my displays. However, all my CRTs look slightly pinkish after calibration (to my looks).
I calibrated using both Advanced and Easy options, and both look the same.
Just to ask, is this correct? I'm not sure if I have missed anything out when calibrating.
Thanks a lot!
10th October 2004, 07:31 PM
what is the color temp u set on your monitor?
may be your eyes not used to it?
10th October 2004, 07:39 PM
My color temp is set to 7500, but after calibration, the color temp seems to look different. I've been using rather high K presets on my monitors, and that 7500K is slightly on the cool side.
I'm really not sure as to whether this is due to me not being comfortable with the calibrated displays.
I've calibrated 2 CRTs so far, and they all look pinkish.
Anyone can remember if they encountered this when they calibrated their first monitor?
NB: Used i1Match 3.0.
Last edited by SNAG; 10th October 2004 at 07:42 PM.
10th October 2004, 07:59 PM
were u using higher temperature last time?
I was using 10000K last time until I found out that I should use 6500K, and at first, the white looks pinkish too...need sometimes to get use to it
Last edited by Wai; 10th October 2004 at 08:07 PM.
10th October 2004, 08:04 PM
Originally Posted by Wai
I was using at temperatures around the range of 7500 and above...
So I guess I'll have to get used to it though.
10th October 2004, 08:07 PM
I have not read the manual, but are you suppose to set the temperature to 6500K before you calibrate?
10th October 2004, 09:50 PM
Perhaps you try editing one of the images you have on the calibrated screen and see if any others here with a proper calibrated machine can tell if it's calibrated properly or not?
10th October 2004, 10:18 PM
I think the colour temperature is important as 6500k is normal light condition which have a bit yellowish tinge while 10000k have a bit blueish tinge.