![]() |
|
|
#1 |
|
Member
Join Date: Dec 2003
Posts: 157
|
intend to get a TC-17E but don't know if it is compatible with the AF 80-200 f/2.8 ED and AF micro 60 f/2.8 lenses that i hv, and to be used with my D70.
If not, what TC could i use for these lenses? |
|
|
|
|
#2 |
|
Member
Join Date: Apr 2003
Location: Near Tampines MRT
Posts: 840
|
The TC-17E II can only be used on AF-S telephoto lenses such as the 70-200 f/2.8G VR, 200 f/2G VR and 300 f/2.8D.
Hope that helps. |
|
|
|
|
#3 | |
|
Member
Join Date: Dec 2003
Posts: 157
|
![]() |
|
|
|
| Sponsored Link |
|
|
#4 | |
|
Senior Member
Join Date: Mar 2004
Location: Central West
Posts: 1,913
|
|
|
|
|
|
|
#5 |
|
Member
Join Date: Mar 2002
Location: Singapore
Posts: 441
|
|
|
|
|
|
#6 | |
|
Member
Join Date: Dec 2003
Posts: 157
|
They had earlier replied me thru email writing as " You should wait for the TC-E17II 1.7x converter which is a new product. It will work with the AF 80-200 f2.8 but not with the AF Micro 60mm." ![]() |
|
|
|
|
|
#7 | |
|
Member
Join Date: Apr 2003
Location: Near Tampines MRT
Posts: 840
|
|
|
|
|
|
|
#8 |
|
Member
Join Date: May 2004
Location: EAST
Posts: 318
|
Recommended by someone.. try Kenko Pro 300 Teleplus 1.4X or 2X
Last edited by Snake; 13th August 2004 at 04:21 PM. |
|
|
|
|
#9 |
|
Member
Join Date: Mar 2004
Posts: 522
|
Based on nikon lens catalogue chart, TC14E & TC20E will not work with both lens. So I doubt the new TC17E will since it is almost basing on these TC design. From the graphical representation, the lens rear element may obstruct the TC extended lens element.
Kenko is the solution and will provides AF for 5.6 and larger aperture (I think). |
|
|
|
|
#10 |
|
Member
Join Date: Nov 2003
Location: Western side of Singapore
Posts: 1,163
|
Someone over on the Nikonians forum who owns the TC-17E has reported that it does NOT work with non-AFS lens, ie the press release is wrong. This is not to surprising given that its predecessors both do not work with non-AFS lens (there's a protruding metal tab on the mount which prevents mating with non-AFS lenses. You can file it off though, allowing you to couple non-AFS Nikkors with the convertor, but you will loss AF).
http://www.nikonians.org/cgi-bin/dcf...rum=DCForumID6 To get convertors for non-AFS Nikkors, the best option are the Kenko Pro300 Teleplus convertors. These work with both AFS and non-AFS Nikkors, and quality is reputed to be excellent, just a hair shy of the TC-14/20Es. Make sure you get the Pro300 series, as Kenko also makes a budget line of teleconvertors (MC-7), whose quality is not as good. |
|
|
![]() |
| Bookmarks |
| Thread Tools | |
|