Can I use Markins ballhead M10 with SLIK Pro 500DX ?

hlminolta · 3rd July 2004

Hi guys,
Anybody use Markins ballhead M10 with SLIK Pro 500DX ?
Or can I ?

Thanks !!

sulhan · 14th July 2004

Hiee....

I personally use the Able 300DX with the M10.....works great.....and works fine. Used the setup and have it tested at Markins vibration test facility in Korea and the 300DX performed well.....

rgds,
sulhan

HotSpots · 21st July 2004

You can remove the pan/tilt head from the SLIK 500DX and change into any ballheads...

Just tighten the panning screw and the center column screw and unscrew the original head.

teerex · 21st July 2004

Originally Posted by HotSpots

You can remove the pan/tilt head from the SLIK 500DX and change into any ballheads...

Just tighten the panning screw and the center column screw and unscrew the original head.

If the new ballhead and the center column screw thread do not fit. You can buy an adaptor bush from CP for a few $$$.

3rd July 2004	#1
hlminolta Member Join Date: Feb 2003 Location: Singapore Posts: 72	Can I use Markins ballhead M10 with SLIK Pro 500DX ? Hi guys, Anybody use Markins ballhead M10 with SLIK Pro 500DX ? Or can I ? Thanks !!

14th July 2004	#2
sulhan Advertiser Join Date: May 2002 Location: Melbourne, Australia Posts: 4,051	Why not.... Hiee.... I personally use the Able 300DX with the M10.....works great.....and works fine. Used the setup and have it tested at Markins vibration test facility in Korea and the 300DX performed well..... rgds, sulhan

21st July 2004	#3
HotSpots Member Join Date: May 2004 Location: Tanjong Pagar Posts: 301	You can remove the pan/tilt head from the SLIK 500DX and change into any ballheads... Just tighten the panning screw and the center column screw and unscrew the original head.