Page 21 of 51 FirstFirst ... 11161920212223263146 ... LastLast
Results 401 to 420 of 1013

Thread: DNP0i$onou$ Clubh0us3 - TCSS Part IV

  1. #401

    Default Re: DNP0i$onou$ Clubh0us3 - TCSS Part IV

    Quote Originally Posted by cheesy View Post
    study ah.. didnt really do so leh but i looked at the range that TK sells..

    Aluminium Alloy Series series fits my wallet better and i dont need a monopod

    T-1204X and T-1004X the same one right? just that one is Carbon Fibre Series?
    yup same, but the carbon fibre and aluminium makes alot of diff in weight esp if u wanna carry overseas for long period of time.. if buy too heavy, scared will just leave at home n not use it ultimately..

  2. #402

    Default Re: DNP0i$onou$ Clubh0us3 - TCSS Part IV

    Quote Originally Posted by kriegsketten View Post
    You sure you don't need low angles right? Reverse folding also don't need right?
    T1204 can reverse fold...

  3. #403

    Default Re: DNP0i$onou$ Clubh0us3 - TCSS Part IV

    Quote Originally Posted by kriegsketten View Post
    You sure you don't need low angles right? Reverse folding also don't need right?
    wah chim sia..

  4. #404

    Default Re: DNP0i$onou$ Clubh0us3 - TCSS Part IV

    Quote Originally Posted by bitez View Post
    yup same, but the carbon fibre and aluminium makes alot of diff in weight esp if u wanna carry overseas for long period of time.. if buy too heavy, scared will just leave at home n not use it ultimately..
    Quote Originally Posted by bitez View Post
    T1204 can reverse fold...
    i should go play around with the tripod before parting with my moolah..

    whats with the reverse fold?

  5. #405
    New Member kriegsketten's Avatar
    Join Date
    Apr 2010
    Location
    Southern Enclave
    Posts
    2,560

    Default Re: DNP0i$onou$ Clubh0us3 - TCSS Part IV

    Quote Originally Posted by cheesy View Post
    wah chim sia..
    no lah, I think the T1204X can do both! Good buy! Low angle much lower also!
    Myflickr | Zoom in for the KILL!

  6. #406

    Default Re: DNP0i$onou$ Clubh0us3 - TCSS Part IV

    Quote Originally Posted by cheesy View Post
    i should go play around with the tripod before parting with my moolah..

    whats with the reverse fold?
    im a noob too so, wad i know so far is if u reverse fold the tripod when u keep it will be smaller...

  7. #407
    New Member kriegsketten's Avatar
    Join Date
    Apr 2010
    Location
    Southern Enclave
    Posts
    2,560

    Default Re: DNP0i$onou$ Clubh0us3 - TCSS Part IV

    Quote Originally Posted by bitez View Post
    T1204 can reverse fold...
    Yup, and low angle much lower too! I think you still need to attach short column before you can mount your ballhead on your model right?
    Myflickr | Zoom in for the KILL!

  8. #408
    New Member kriegsketten's Avatar
    Join Date
    Apr 2010
    Location
    Southern Enclave
    Posts
    2,560

    Default Re: DNP0i$onou$ Clubh0us3 - TCSS Part IV

    Quote Originally Posted by bitez View Post
    im a noob too so, wad i know so far is if u reverse fold the tripod when u keep it will be smaller...
    Actually, shorter... width wise still wider (whole thing) if you compare to normal folding, coz you have to push the column all the way up and the base plate keeps the legs spread out... normal folding you can keep the legs closer at the bottom... either way, I still prefer reverse fold...
    Myflickr | Zoom in for the KILL!

  9. #409

    Default Re: DNP0i$onou$ Clubh0us3 - TCSS Part IV

    Quote Originally Posted by bitez View Post
    im a noob too so, wad i know so far is if u reverse fold the tripod when u keep it will be smaller...
    its like inverted right? the ball ends up at the "bottom" while the legs are on "top"?

    Quote Originally Posted by kriegsketten View Post
    Yup, and low angle much lower too! I think you still need to attach short column before you can mount your ballhead on your model right?
    looking at the technical details of T-1204X and T-1004X, the only difference i see is the weight, it doesn't say anything about the angle leh. or did i missed that out?

  10. #410

    Default Re: DNP0i$onou$ Clubh0us3 - TCSS Part IV

    Quote Originally Posted by kriegsketten View Post
    Actually, shorter... width wise still wider (whole thing) if you compare to normal folding, coz you have to push the column all the way up and the base plate keeps the legs spread out... normal folding you can keep the legs closer at the bottom... either way, I still prefer reverse fold...
    I dont use reverse folding with the short column though. Less trouble and easier to bring around

  11. #411

    Default Re: DNP0i$onou$ Clubh0us3 - TCSS Part IV

    my 1004 also can reverse fold leh! Just tt my ballhead will be in the way of it folding fully.
    Nikon D90 | AF-S 18-105mm | AF 50mm f/1.8D | Tokina 12-24mm f4 | Sigma 30mm f1.4

  12. #412
    New Member kriegsketten's Avatar
    Join Date
    Apr 2010
    Location
    Southern Enclave
    Posts
    2,560

    Default Re: DNP0i$onou$ Clubh0us3 - TCSS Part IV

    Quote Originally Posted by jeezuinn View Post
    I dont use reverse folding with the short column though. Less trouble and easier to bring around
    I reverse fold because it can protect my ballhead since I can always leave it on... Like putting it behind bars...
    Myflickr | Zoom in for the KILL!

  13. #413

    Default Re: DNP0i$onou$ Clubh0us3 - TCSS Part IV

    Quote Originally Posted by cheesy View Post
    its like inverted right? the ball ends up at the "bottom" while the legs are on "top"?
    I think this will give you a better picture.

  14. #414

    Default Re: DNP0i$onou$ Clubh0us3 - TCSS Part IV

    Quote Originally Posted by kriegsketten View Post
    You're on Sirui, no meh?
    nope.. I'm using Benro.. lolx..
    Nikkon D90 | AF-S NIKKOR 18-105mm 1:35-5.6G | DI866 External Flashlight | AF-S NIKKOR 50mm f/1.4G

  15. #415

    Default Re: DNP0i$onou$ Clubh0us3 - TCSS Part IV

    Quote Originally Posted by Smiles88 View Post
    my 1004 also can reverse fold leh! Just tt my ballhead will be in the way of it folding fully.
    If using the G10 ball head can reverse fold it fully

  16. #416

    Default Re: DNP0i$onou$ Clubh0us3 - TCSS Part IV

    Quote Originally Posted by kriegsketten View Post
    Yup, and low angle much lower too! I think you still need to attach short column before you can mount your ballhead on your model right?
    errrrrr.. we didnt try the low angle functionality yet. and im not the one fiddling with the tripod.. im in chg of the cam instead..

  17. #417
    New Member kriegsketten's Avatar
    Join Date
    Apr 2010
    Location
    Southern Enclave
    Posts
    2,560

    Default Re: DNP0i$onou$ Clubh0us3 - TCSS Part IV

    Quote Originally Posted by cheesy View Post
    its like inverted right? the ball ends up at the "bottom" while the legs are on "top"?


    looking at the technical details of T-1204X and T-1004X, the only difference i see is the weight, it doesn't say anything about the angle leh. or did i missed that out?
    I think it can do low angles... I read 135mm on T-1204X. So rest assured it can... the problem here is the ballhead G20 will make you unable to reverse fold well, especially if you put on the short column... Smiles88 has this problem. He's on G20 I think... give and take I suppose... If you want bigball head, and can reverse fold better...maybe to give T-2204X a look... test out the reverse fold with the ballhead of your choice first.
    Myflickr | Zoom in for the KILL!

  18. #418

    Default Re: DNP0i$onou$ Clubh0us3 - TCSS Part IV

    yeah... backside itchy lor... went for G20. But I'm happy with it!
    Nikon D90 | AF-S 18-105mm | AF 50mm f/1.8D | Tokina 12-24mm f4 | Sigma 30mm f1.4

  19. #419
    New Member kriegsketten's Avatar
    Join Date
    Apr 2010
    Location
    Southern Enclave
    Posts
    2,560

    Default Re: DNP0i$onou$ Clubh0us3 - TCSS Part IV

    Quote Originally Posted by jeezuinn View Post
    I think this will give you a better picture.
    In my case, I'm using a short column hence my ballhead is closer towards the top... but I'm not using Sirui's ballhead okay? Hence can do the job.
    Myflickr | Zoom in for the KILL!

  20. #420
    New Member kriegsketten's Avatar
    Join Date
    Apr 2010
    Location
    Southern Enclave
    Posts
    2,560

    Default Re: DNP0i$onou$ Clubh0us3 - TCSS Part IV

    Quote Originally Posted by Smiles88 View Post
    yeah... backside itchy lor... went for G20. But I'm happy with it!
    Markins Q3T! (with smaller base!) Next time I can let you try fitting on your poddie if you like... Big ballhead, slim body...howzat???
    Myflickr | Zoom in for the KILL!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •