Results 1 to 6 of 6

Thread: What is the actual PIXEL we need for 4R ??

  1. #1
    Senior Member
    Join Date
    Mar 2002
    Location
    somewhere near...
    Posts
    2,114

    Default What is the actual PIXEL we need for 4R ??

    Anyone can enlighten me? I sent in my pictures at 1300x980.
    I lost my frames!!!!! sien.
    What is the actual PIXEL to send in that what I send is what I get??
    Any one??

    Thanks!

  2. #2
    Senior Member
    Join Date
    Jan 2002
    Location
    Singapore
    Posts
    12,938

    Default

    ratio should be 3:2 since 4R is 6 inch by 4 inch.
    Check out my wildlife pics at www.instagram.com/conrad_nature

  3. #3
    Senior Member
    Join Date
    Jan 2002
    Location
    Singapore, Singapore, Singapor
    Posts
    6,405

    Default

    At least 600 x 400 pixels for acceptable quality. For best quality, no more than 1800 x 1200 is required. Going beyond that will not give an increase in quality.

    Regards
    CK

  4. #4

    Default

    Take the 6 by 4:

    6 x 300ppi = 1800
    4 x 300ppi = 1200

    So you need roughly the above size for a 4R picture (tat's what I was told) so not too sure on this....

  5. #5

    Default

    Originally posted by Blitz
    Take the 6 by 4:

    6 x 300ppi = 1800
    4 x 300ppi = 1200

    So you need roughly the above size for a 4R picture (tat's what I was told) so not too sure on this....
    Sounds logical.

  6. #6
    Senior Member
    Join Date
    Jan 2002
    Location
    Singapore, Singapore, Singapor
    Posts
    6,405

    Default

    Originally posted by revenant


    Sounds logical.
    1800 x 1200 is even sufficient to print a pretty good 8x12. The fact is that you don't really need 300ppi for a good picture. 150-200ppi can produce very good results if you start off with a good image.

    Regards
    CK

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •