Page 1 of 2 12 LastLast
Results 1 to 20 of 24

Thread: Distortion Correction feature in K-x and K-7

  1. #1

    Default Distortion Correction feature in K-x and K-7

    Dear K-x/ K-7 users.
    Has anyone tested the ‘distortion correction’ feature?
    Any comments on whether it really works? Or is it better to do post image processing (e.g. using Photoshop, PTLens, etc)?

  2. #2

    Default Re: Distortion Correction feature in K-x and K-7

    Quote Originally Posted by wywysimba View Post
    Dear K-x/ K-7 users.
    Has anyone tested the ‘distortion correction’ feature?
    Any comments on whether it really works? Or is it better to do post image processing (e.g. using Photoshop, PTLens, etc)?
    if i am not wrong, i had ask the simliar question before

    Think it only work for pentax DA series of lense only.

    3rd party lenses or older series of lenses may not have the data commuciation between the body and the lenses
    ....

  3. #3

    Default Re: Distortion Correction feature in K-x and K-7

    Quote Originally Posted by wywysimba View Post
    Dear K-x/ K-7 users.
    Has anyone tested the ‘distortion correction’ feature?
    Any comments on whether it really works? Or is it better to do post image processing (e.g. using Photoshop, PTLens, etc)?
    from tests i've seen, when you can use it, it works at correcting lens characteristic problem.

  4. #4

    Default Re: Distortion Correction feature in K-x and K-7

    Yes, I read somewhere that the feature only works when you shoot with a DA or DFA lens.
    Just wondering whether any of the K-x/K-7 users have actually tested this feature and can share on how well this feature works for you.

    To be honest, I was rather surprise to see this feature available in K-x/K-7 as it is usually only available in more expensive camera. If it really works, it will save me a massive amount of time (i.e. instead of having to shoot in RAW mode and do post processing).

    I've been using Nikon D40 for years, and experienced quite a fair bit of barrel distortion when using the kit lens (well, I suppose this problem is common for most of the zoom lenses out there?). Time to upgrade the gear and thought the "distortion correction" feature is one I will need when getting my new DSLR.

  5. #5

    Default Re: Distortion Correction feature in K-x and K-7

    Quote Originally Posted by wywysimba View Post
    Yes, I read somewhere that the feature only works when you shoot with a DA or DFA lens.
    Just wondering whether any of the K-x/K-7 users have actually tested this feature and can share on how well this feature works for you.

    To be honest, I was rather surprise to see this feature available in K-x/K-7 as it is usually only available in more expensive camera. If it really works, it will save me a massive amount of time (i.e. instead of having to shoot in RAW mode and do post processing).

    I've been using Nikon D40 for years, and experienced quite a fair bit of barrel distortion when using the kit lens (well, I suppose this problem is common for most of the zoom lenses out there?). Time to upgrade the gear and thought the "distortion correction" feature is one I will need when getting my new DSLR.
    distortion correction off on k-x



    distortion correction on



    images taken from: http://www.dcresource.com/reviews/pe...x-review/using

  6. #6
    Senior Member creampuff's Avatar
    Join Date
    Jul 2006
    Location
    Dover
    Posts
    5,116

    Default Re: Distortion Correction feature in K-x and K-7

    With firmware update 1.03 on the K-7,

    Lens Correction (Distortion, Lateral chromatic aberration) is settable for the following FA Limited lenses:
    smc PENTAX-FA 31mmF1.8AL Limited
    smc PENTAX-FA 43mmF1.9 Limited
    smc PENTAX-FA 77mmF1.8 Limited

  7. #7

    Default Re: Distortion Correction feature in K-x and K-7

    distortion correction off at 18mm (kit lens): 0.8%


    distortion correction on at 18mm (kit lens): 0.1%


    distortion correction off at 55mm (kit lens): 0.2%


    distortion correction on at 55mm (kit lens): non-existant


    for k-x, images from: http://www.imaging-resource.com/PRODS/KX/KXA4.HTM

  8. #8
    Senior Member creampuff's Avatar
    Join Date
    Jul 2006
    Location
    Dover
    Posts
    5,116

    Default Re: Distortion Correction feature in K-x and K-7

    Quote Originally Posted by wywysimba View Post
    Yes, I read somewhere that the feature only works when you shoot with a DA or DFA lens.
    Just wondering whether any of the K-x/K-7 users have actually tested this feature and can share on how well this feature works for you.

    To be honest, I was rather surprise to see this feature available in K-x/K-7 as it is usually only available in more expensive camera. If it really works, it will save me a massive amount of time (i.e. instead of having to shoot in RAW mode and do post processing).

    I've been using Nikon D40 for years, and experienced quite a fair bit of barrel distortion when using the kit lens (well, I suppose this problem is common for most of the zoom lenses out there?). Time to upgrade the gear and thought the "distortion correction" feature is one I will need when getting my new DSLR.
    Yes this feature works but there is a small penalty in terms of image processing time, which does affect the time to preview the image and in outright fps the camera is able to shoot. If you want an in-camera no-fuss approach to distortion correction, this is a good solution.

    However if you do happen to have the new Adobe Photoshop CS5, one can have on-the-fly lens distortion correction based on presets of popular lenses from different camera makes. You can shoot in both jpeg or RAW and even create your own lens correction setting presets. Very quick timesaver during post processing, so it all depends where you want the corrections done.

  9. #9
    Member
    Join Date
    Jan 2010
    Location
    Singapore, Singapore, Singapor
    Posts
    891

    Default Re: Distortion Correction feature in K-x and K-7

    Looks quite good to me but i heard that if they are on picture take longer to be saved and you can't instantly preview your images (even though i don't do that now...)

    Ot but i hope the K-7 will have the cross processing filter
    Buy Film Not Megapixels

  10. #10

    Default Re: Distortion Correction feature in K-x and K-7

    Quote Originally Posted by creampuff View Post

    However if you do happen to have the new Adobe Photoshop CS5, one can have on-the-fly lens distortion correction based on presets of popular lenses from different camera makes. You can shoot in both jpeg or RAW and even create your own lens correction setting presets. Very quick timesaver during post processing, so it all depends where you want the corrections done.
    they have correction for the sigma 10-20?

    if that's so, i must get cs5 asap when i change computer.

    or maybe i should just get ptlens.. it's only usd25 after all...
    Last edited by night86mare; 20th May 2010 at 06:01 PM.

  11. #11

    Default Re: Distortion Correction feature in K-x and K-7

    The camera must be able to recognize the lens for this feature to work properly. And yes, because it needs to do image processing in-camera, so it will take longer to save the photo. I mean even your desktop PC will take a second or 2 to process and edited image, right?
    But generally, the images are not so distorted that will require you to need adjustment full time. Just keep it off and use it if you notice distortion in the image.
    PENTAXKR,18250,18135,35,40,70,600,AF360
    SONYA6000,1650,1855,18200,5018,3028,16,RX100M3

  12. #12

    Default Re: Distortion Correction feature in K-x and K-7

    Quote Originally Posted by night86mare View Post
    distortion correction off at 18mm (kit lens): 0.8%

    distortion correction on at 18mm (kit lens): 0.1%

    distortion correction off at 55mm (kit lens): 0.2%

    distortion correction on at 55mm (kit lens): non-existant

    for k-x, images from: http://www.imaging-resource.com/PRODS/KX/KXA4.HTM
    Thanks for sharing the review website!
    Wow, seems like this feature works pretty well for the kit lens (at the widest end). By the way, here's the correct pix for 'distortion correction on at 18mm':
    http://www.imaging-resource.com/PROD...FAW_DC_550.jpg


    Quote Originally Posted by creampuff View Post
    If you want an in-camera no-fuss approach to distortion correction, this is a good solution.

    Yep, that's me - the lazy type... prefer to have everything done in-camera.

  13. #13

    Default Re: Distortion Correction feature in K-x and K-7

    Hi airconvent,
    since you are a K7 user, can I check with you whether it is possible to customise a hardware button to quickly enable/disable the distortion correction feature? or must you go into the menu to enable/disable it?

  14. #14

    Default Re: Distortion Correction feature in K-x and K-7

    Quote Originally Posted by wywysimba View Post
    Hi airconvent,
    since you are a K7 user, can I check with you whether it is possible to customise a hardware button to quickly enable/disable the distortion correction feature? or must you go into the menu to enable/disable it?
    Sorry Bro. I don't use button customization but did a quick check of the manual and can't find anything about changing button functions. Perhaps someone else can confirm this?
    PENTAXKR,18250,18135,35,40,70,600,AF360
    SONYA6000,1650,1855,18200,5018,3028,16,RX100M3

  15. #15
    Member
    Join Date
    Jan 2010
    Location
    Singapore, Singapore, Singapor
    Posts
    891

    Default Re: Distortion Correction feature in K-x and K-7

    Isn't it press once ?

    pressing twice will close the menu
    Buy Film Not Megapixels

  16. #16
    Senior Member creampuff's Avatar
    Join Date
    Jul 2006
    Location
    Dover
    Posts
    5,116

    Default Re: Distortion Correction feature in K-x and K-7

    With the K-7, if the rear LCD is off, press the Info button twice (if status display is already on, press the info button once only... pretty obvious lah) and use the 4 way controller to navigate to the distortion correction/lateral chromatic aberration correction tab. Use the rear e-dial to enable or disable. Takes no more than a few seconds. What's so difficult about it?

    The camera manual is provided for you to read up on the camera's features, and if you take the time to figure out the controls yourself, you'll find that you'll get most out of your camera. Don't expect to be spoonfed info all the time.
    Last edited by creampuff; 22nd May 2010 at 01:06 AM. Reason: clarification

  17. #17

    Default Re: Distortion Correction feature in K-x and K-7

    Thanks all for the comments.
    Will be getting the K-7. well, after getting approval from the Finance Minister at home...

  18. #18
    Senior Member creampuff's Avatar
    Join Date
    Jul 2006
    Location
    Dover
    Posts
    5,116

    Default Re: Distortion Correction feature in K-x and K-7

    Quote Originally Posted by night86mare View Post
    they have correction for the sigma 10-20?

    if that's so, i must get cs5 asap when i change computer.

    or maybe i should just get ptlens.. it's only usd25 after all...

    Some latest info for you:

    Adobe has posted a pre-release version of its Lens Profile Creator utility that enables creation of custom lens profiles for Photoshop CS5, ACR 6.1 and Lightroom 3. The process involves downloading and printing a checkerboard test chart from Adobe Labs, and shooting a series of RAW or non-RAW images. These can then be imported to the Lens Profile Creator to generate custom profiles for the Lens Correction feature in Photoshop CS5 and Lightroom 3. Furthermore, these profiles can also be shared via the company's user community.

    http://labs.adobe.com/technologies/l...r/?PID=3154956

  19. #19

    Default Re: Distortion Correction feature in K-x and K-7

    Quote Originally Posted by creampuff View Post
    Some latest info for you:

    Adobe has posted a pre-release version of its Lens Profile Creator utility that enables creation of custom lens profiles for Photoshop CS5, ACR 6.1 and Lightroom 3. The process involves downloading and printing a checkerboard test chart from Adobe Labs, and shooting a series of RAW or non-RAW images. These can then be imported to the Lens Profile Creator to generate custom profiles for the Lens Correction feature in Photoshop CS5 and Lightroom 3. Furthermore, these profiles can also be shared via the company's user community.

    http://labs.adobe.com/technologies/l...r/?PID=3154956
    mmmm that sounds good.

    ok, when i get back firmly to singapore and finally purchase a pc i'll probably finally move on from cs2.

  20. #20
    Senior Member wrx_sti_22b's Avatar
    Join Date
    Apr 2005
    Location
    Compassvale Lane
    Posts
    4,952

    Default Re: Distortion Correction feature in K-x and K-7

    The distortion correction works for all Sigma & Tamron lens as well? I can't tell if the distortion is corrected a not...
    From Pentax to 4/3, back to Pentax and then back to M4/3 !?!?

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •