Results 1 to 7 of 7

Thread: filter holder: any recommended brand?

  1. #1

    Default filter holder: any recommended brand?

    hi all, i am using tianya filters... the filter holder broke yesterday, thus am looking to get another one... any good brand to recommend? and where to get it? i would prefer a holder that can at least stack two filters at the same time... budget wise, so to say... i bought my filter set 2nd hand for $75, slightly more expensive than my filter set is ok... thanks!
    Why so serious... Son?

  2. #2
    Member
    Join Date
    Jun 2009
    Location
    Singapore
    Posts
    272

    Default Re: filter holder: any recommended brand?

    the filter holder is cheap. go to mass sales section to get one
    Canon 6D | Sony A7II w Metabones IV | Lenses and Flash

  3. #3
    Moderator Octarine's Avatar
    Join Date
    Jan 2008
    Location
    Pasir Ris
    Posts
    12,394

    Default Re: filter holder: any recommended brand?

    The Cokin holder with ring is less than SGD 50, iirc. Got it at OP.
    EOS

  4. #4

    Default Re: filter holder: any recommended brand?

    3rd party ones are cheap - get two and stand-by one holder.

    Creme of the crop would be Lee holders at much more than S$100 (http://www.adorama.com/LEFK.html).

  5. #5

    Default Re: filter holder: any recommended brand?

    The Cokin slim filter holder. I'm using it.

  6. #6

    Default Re: filter holder: any recommended brand?

    thanks guys for the infos... am buying the cheap ones first, by the end of the month, i will get a GOOD one! anyways, is it generic? i mean, even if am using tianya filters, it can be mounted on a different brand of filter holder? thanks again...
    Why so serious... Son?

  7. #7
    Moderator Octarine's Avatar
    Join Date
    Jan 2008
    Location
    Pasir Ris
    Posts
    12,394

    Default Re: filter holder: any recommended brand?

    Quote Originally Posted by Wurdelak View Post
    thanks guys for the infos... am buying the cheap ones first, by the end of the month, i will get a GOOD one! anyways, is it generic? i mean, even if am using tianya filters, it can be mounted on a different brand of filter holder? thanks again...
    Have a look here: http://www.cokin.com/ico15-A.html
    The 2nd half of the website describes the format (= sizes) of filters and filter holders. From what I have seen the other filter manufacturers follow these sizes, also to make it easy for people to switch to other products
    P Series is the size you can easily find in normal shops and in Mass Sales.
    EOS

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •