Results 1 to 7 of 7

Thread: JPG or TIFF to print digital images?

  1. #1

    Default JPG or TIFF to print digital images?

    Here's another question from newbie me...

    When I send my images to the shop for printing, does it make any difference in quality whether I save them as JPG (high quality) or TIFF?

    Thanks!

  2. #2

    Default

    I think it's better to save them as jpg (quality 80% should be good enuff) since you are store more in the CD-R. I doubt the difference when you print them out will be perceivable, unless you are blowing the pic up really big.

  3. #3
    Senior Member
    Join Date
    Jan 2002
    Location
    UK
    Posts
    3,911

    Default

    There are differences although the difference is minimal. It really depends a lot on whether you have adequate resolution to print, if you are near the 300dpi recommended printing resolution then high quality JPGS should be very very close to TIFFs for all intents and purposes. But if you are stretching the resolution front then JPG compression artefacts get "enlarged" and become more obvious. Although I personally shoot nothing but JPGs anyway, so I personally don't think it's an issue.

  4. #4
    Senior Member
    Join Date
    Jan 2002
    Location
    Singapore, Singapore, Singapor
    Posts
    6,405

    Default

    Once, my regular lab showed me 2 10x15" prints, one printed from a TIFF file, another from JPG. Even under close inspection (though I did not use a loupe -- no one looks at prints with a loupe anyway), I can't tell the difference. As long as your source file is of sufficient quality, it should be okay. A well captured JPEG still beats badly captured TIFF. Don't be too hung up over the RAW vs TIFF vs JPEG issues.

    Regards
    CK

  5. #5

    Default

    I had some .TIF files saved with LZW lossless compression on and the first lab couldn't get it printed right and the second lab I asked said their machine can't open the file. They advised me to save it without any compression.

    Otherwise my previous experience with a "normal" TIF file printed alright.

    If you are editing images save in a lossless format. Instead of doing multiple saves in JPEG, save in TIF. The final files for the lab can be saved in JPEG if desired (and I think preferred by most labs).

  6. #6

    Default

    Hallo... Thanks all. I'll stick with JPG! But b4 I save the image, how do I judge whether to save as Medium Quality, High, or Maximum (10-12) as quality? Is it dependent on how large I print?

    So far for printing, I've tried High and Maximum but can't tell the difference at 4x6. However, there's a good difference in file size.


  7. #7

    Default

    I'd suppose the general rule is to save at the best quality settings if you can, though High setting is good enough too for your personal experience with 4R prints. If you have to burn another disc in order to give the lab all the files, that's a tiny cost anyway. There's also CDRWs which might be preferable.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •