New fireware 1.02e for A1

forbytes · 28th December 2003

As above. Check out here

fevernova · 29th December 2003

Yep, thanks man. Just got it downloaded. Wondering what changes were made to the firmware this time...

forbytes · 29th December 2003

Originally Posted by fevernova

Wondering what changes were made to the firmware this time...

download and read the PDF titled "A1_FW102_UPDATE_UK", it mentions that it only solve a hang problem with RAW and TIFF files.

sulhan · 2nd January 2004

I have juz updated the FW.

From..... 1.00e to 1.02e

So far so good . No Issue.

rgds,
me

forbytes · 24th January 2004

To check for the version of the firmware, follow the steps as listed below (of coz the information is provided by Minolta)

1) Display the setup menu. Confirm that the section 1 menu tab is highlighted.

2) Press the display information button. A window will open to indicate the software version.

forbytes · 24th January 2004

When you upgrade the firmware, Minolta recommends that you use a fully charged battery to do the job to avoid incomplete flashing and indirectly lead to damage to the EPROM

28th December 2003	#1
forbytes Member Join Date: Jun 2003 Location: West, Singapore Posts: 887	New fireware 1.02e for A1 As above. Check out here

2nd January 2004	#4
sulhan Advertiser Join Date: May 2002 Location: Melbourne, Australia Posts: 4,051	Juz updated.... I have juz updated the FW. From..... 1.00e to 1.02e So far so good . No Issue. rgds, me

29th December 2003	#2
fevernova Member Join Date: Aug 2003 Posts: 162	Yep, thanks man. Just got it downloaded. Wondering what changes were made to the firmware this time...

24th January 2004	#5
forbytes Member Join Date: Jun 2003 Location: West, Singapore Posts: 887	To check for the version of the firmware, follow the steps as listed below (of coz the information is provided by Minolta) 1) Display the setup menu. Confirm that the section 1 menu tab is highlighted. 2) Press the display information button. A window will open to indicate the software version.