ClubSNAP Photography Forums

Go Back   ClubSNAP Photography Forums > Equipment Discussions > Sony/Konica-Minolta > Konica-Minolta legacy

Konica-Minolta legacy The essentials of imaging. Forum for past Konica-Minolta cameras and equipment.


 
Thread Tools
Old 25th November 2003   #1
ndroo-
Deregistered
 
Join Date: Nov 2003
Location: Singapore
Posts: 120
Default Filters on the A1

Anyone using 49mm UV/cir pol filters on their A1? Any vignetting as claimed by some ppl? If no, which brand are you using? Are you using any step ups?
ndroo- is offline  
Old 25th November 2003   #2
sulhan
Advertiser
 
Join Date: May 2002
Location: Melbourne, Australia
Posts: 4,051
Default Right this moment....

Hi Ndroo....

Right this very moment...a 49mm Kenko MC Skyllight (1B) is stuck on my cam.
no special filter.....

No vignetting .....

Rgds....

What you could do is when u get your cam.....bring it doen to the shop and test a few shots....with the filter....b4 buying...


rgds,
me
sulhan is offline  
Old 26th November 2003   #3
ndroo-
Deregistered
 
Join Date: Nov 2003
Location: Singapore
Posts: 120
Default

Originally Posted by sulhan
Hi Ndroo....

Right this very moment...a 49mm Kenko MC Skyllight (1B) is stuck on my cam.
no special filter.....

No vignetting .....

Rgds....

What you could do is when u get your cam.....bring it doen to the shop and test a few shots....with the filter....b4 buying...


rgds,
me
thanks sulhan. read this wonderful advise of yours in some other threads too. but as a newbie, a bit worried i can't spot the problem

dats y askin here for any particular brand/model which the CS posse is already using ... then chances things will go wrong till be less
ndroo- is offline  
Sponsored Link
Old 26th November 2003   #4
frisky
Member
 
Join Date: Oct 2002
Location: Kitten's Den
Posts: 733
Default

Originally Posted by ndroo
thanks sulhan. read this wonderful advise of yours in some other threads too. but as a newbie, a bit worried i can't spot the problem

dats y askin here for any particular brand/model which the CS posse is already using ... then chances things will go wrong till be less
As mentioned, Minolta UV works fine. From some accounts the worse is not at 28mm but rather around 35-50, I didn't verify this though.
frisky is offline  
Old 27th November 2003   #5
tbteng
Member
 
Join Date: Jun 2003
Location: Here! Never cross mountain or
Posts: 171
Default

Sorry for my ignorance. What is a UV filter and what does it do on the A1 pls?
tbteng is offline  
Old 27th November 2003   #6
ndroo-
Deregistered
 
Join Date: Nov 2003
Location: Singapore
Posts: 120
Default

Originally Posted by tbteng
Sorry for my ignorance. What is a UV filter and what does it do on the A1 pls?
I'm a newbie too and here are some info ... take from megapixel.net

"Skylight, Haze, or UV filters are the most common, and are often recommended in stores as inexpensive protection for an expensive lens. These filters are intended for use outdoor, and in fine weather.

Skylight and Haze filters are designed to reduce excessive bluishness by absorbing part of the UV radiation that can cause haze in outdoor photos. The effect of these filters is generally very subtle, and often the claims of their effectiveness are exaggerated.

Still, simple experimentation will reveal that they do lessen the "haze" effect that can become noticeable in outdoor photos, and that the blue component of the photo is attenuated slightly.

The UV filter, a close relative of the Haze and Skylight filters, is designed to absorb the ultraviolet part of the spectrum between 10nm and 400 nm. This type of filter is generally more effective at reducing the haziness cause by UV rays in distant landscapes than either Skylight, or Haze filters."

Check out the site for more info ...

http://www.megapixel.net/html/issueindex.php?lang=en
ndroo- is offline  
Old 27th November 2003   #7
chriszzz
Member
 
Join Date: Jan 2003
Posts: 655
Default

Originally Posted by frisky
As mentioned, Minolta UV works fine. From some accounts the worse is not at 28mm but rather around 35-50, I didn't verify this though.
In summary, using just 1 filter does not vignette. Stacking filters ( ie, 2 or more filters ) will vignette. I've tried it, and that's my observation.
chriszzz is offline  
Old 27th November 2003   #8
frisky
Member
 
Join Date: Oct 2002
Location: Kitten's Den
Posts: 733
Default

Originally Posted by chriszzz
In summary, using just 1 filter does not vignette. Stacking filters ( ie, 2 or more filters ) will vignette. I've tried it, and that's my observation.
I just did a test on my 7i with a single Hoya UV (multicoated) filter.
No stacking of filter.

Verdict : The vignetting, though mild, can be observed from 28-50 mm, and is more obvious when you use a bigger aperture, and wider angle. So it is worst at 28, f/2.8.

However, it is not visible on the LCD, only visible when you display the picture on screen on the monitor. I believe it would not be noticible on prints either.

Unless you are looking for it, you probably won't notice it unless it is at its worst, 28mm f/2.8. Whether it is a issue or not depends on individual.
frisky is offline  
Closed Thread

Bookmarks

Thread Tools

Forum Jump


All times are GMT +8. The time now is 09:48 PM.


Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Copyright © 2002 - 2009 ClubSNAP.com
Page generated in 0.08022 seconds with 7 queries