Results 1 to 4 of 4

Thread: Creating Panorama's: Cracked pictures

  1. #1
    Member
    Join Date
    Sep 2008
    Location
    Singapore
    Posts
    454

    Default Creating Panorama's: Cracked pictures

    Hi Guys,

    I used CS4 to do a Panaroma of I think 10 pics.. when the Panorama is read... it had cracks across the whole pic.

    Any ideas?

    Regards,
    Eric Lee

  2. #2

    Default Re: Creating Panorama's: Cracked pictures

    how much did you overlap each pic by? it would be much help if you could upload your "cracked panorama"

  3. #3
    Senior Member giantcanopy's Avatar
    Join Date
    Feb 2007
    Location
    SG
    Posts
    6,232

    Default Re: Creating Panorama's: Cracked pictures

    I think it somehow demarcates the areas where various frames overlaps.
    I had it once a long time ago. When u flatten all the layers, those lines should not be visible.

    If there wasn't sufficient overlap for PS photomerge to calculate and merge the common points,
    the pano would not even be formed.

    Btw that was for CS3. Never tried CS4

    Ryan
    Last edited by giantcanopy; 29th March 2009 at 12:30 PM.

  4. #4
    Moderator ziploc's Avatar
    Join Date
    Jan 2002
    Location
    Snoopyland
    Posts
    4,577

    Default Re: Creating Panorama's: Cracked pictures

    The "crack lines" are still there in CS4, but only when the multi layer image is viewed smaller than 100%. When viewed at full size, or flattened as giantcanopy mentioned, the lines are no longer visible.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •