Results 1 to 17 of 17

Thread: Digi Cabi DB-036: How to adjust height of trays

  1. #1

    Default Digi Cabi DB-036: How to adjust height of trays

    Hi Guys,

    just bought a dry cabi. Read from web sites that I should be able to adjust the height of the trays in it. But after fiddling with it for a while, I can't seem to do so. Can someone please advise? The trays seem to be attached to 4 plastic tabs which are inserted into the recession of the cabinet at the sides. No matter how I shift it, the rigid tray won't come out.

  2. #2
    Senior Member NovJoe's Avatar
    Join Date
    Feb 2009
    Location
    ~Sunny Little Island~
    Posts
    5,651

    Default Re: Digi Cabi DB-036: How to adjust height of trays

    You should be able to do so by 1st, removing the tray out of the cabinet, then removing the tray holders by tilting them 45 degrees upwards.

    Do the reverse method when trying to place the tray holders and tray back.

    I've tried at Carrefour when buying this cabinet but have not actually done any shifting of the tray placements in my cabinet yet.

    NovJoe.

  3. #3

    Default Re: Digi Cabi DB-036: How to adjust height of trays

    Thanks. As I suspected - theres something different with my cabi. There are no holders. The trays have these extended plastic tabs at four corners which are inserted into the recessions of the cabinet. As such, I cannot remove the trays. I am one darn unlucky person. Everything I buy has a problem. sigh... Anyone else has this problem?

    Quote Originally Posted by NovJoe View Post
    You should be able to do so by 1st, removing the tray out of the cabinet, then removing the tray holders by tilting them 45 degrees upwards.

    Do the reverse method when trying to place the tray holders and tray back.

    I've tried at Carrefour when buying this cabinet but have not actually done any shifting of the tray placements in my cabinet yet.

    NovJoe.

  4. #4
    Senior Member NovJoe's Avatar
    Join Date
    Feb 2009
    Location
    ~Sunny Little Island~
    Posts
    5,651

    Default Re: Digi Cabi DB-036: How to adjust height of trays

    Those are the tray holders. You can remove them with the method.

    Give me a minute. I'll test out mine now.

    NovJoe.

  5. #5
    Senior Member NovJoe's Avatar
    Join Date
    Feb 2009
    Location
    ~Sunny Little Island~
    Posts
    5,651

    Default Re: Digi Cabi DB-036: How to adjust height of trays

    Ok, I've tested out.

    The DC-036 is a bit different from the bigger brothers with tabs. Instead it is much easier to remove.

    You just need to push the tray from left to right and tilt the tray a little to remove it (just be extra careful here) and Voila! The tray is out.

    When placing back the tray, just slot into the right side fully, then push and slot it to the left and you are done.

  6. #6

    Default Re: Digi Cabi DB-036: How to adjust height of trays

    Hmm... ok thanks. so there's nothing wrong with my cabi? I'll chekc it out later.

    Quote Originally Posted by NovJoe View Post
    Ok, I've tested out.

    The DC-036 is a bit different from the bigger brothers with tabs. Instead it is much easier to remove.

    You just need to push the tray from left to right and tilt the tray a little to remove it (just be extra careful here) and Voila! The tray is out.

    When placing back the tray, just slot into the right side fully, then push and slot it to the left and you are done.

  7. #7

    Default Re: Digi Cabi DB-036: How to adjust height of trays

    You sure yours is plastic, cos mine is metal corners that I can easily take out. And I remember that I have to install the trays by myself.

  8. #8
    Senior Member NovJoe's Avatar
    Join Date
    Feb 2009
    Location
    ~Sunny Little Island~
    Posts
    5,651

    Default Re: Digi Cabi DB-036: How to adjust height of trays

    It is one whole piece of metal tray that has the 4 stubs at the sides for slotting in and out of the cabinet.

  9. #9

    Default Re: Digi Cabi DB-036: How to adjust height of trays

    Not sure if its metal or plastic. Was in a rush this morning. Didn't want to force it, fearing it might break. Guess I have to use a little moe force. Mine came with the trays in the slots already.

    Quote Originally Posted by AhKeong83 View Post
    You sure yours is plastic, cos mine is metal corners that I can easily take out. And I remember that I have to install the trays by myself.

  10. #10
    Senior Member NovJoe's Avatar
    Join Date
    Feb 2009
    Location
    ~Sunny Little Island~
    Posts
    5,651

    Default Re: Digi Cabi DB-036: How to adjust height of trays

    Don't worry, you'll be fine as I've tested removing already.

    NovJoe.

  11. #11

    Default Re: Digi Cabi DB-036: How to adjust height of trays

    I just bot mine too. the new version got no metal holder... you need to push the plastic either to the right or left to unlock it then you slowly tilt up or down to take it up..

    dun force up or down.. first step must push right or left.

  12. #12

    Default Re: Digi Cabi DB-036: How to adjust height of trays

    Alright! I managed to remove the trays. Thanks pal. The material feels very much plastic to me. Anyway, didn't break anything. haha

    Quote Originally Posted by NovJoe View Post
    Don't worry, you'll be fine as I've tested removing already.

    NovJoe.

  13. #13
    Senior Member NovJoe's Avatar
    Join Date
    Feb 2009
    Location
    ~Sunny Little Island~
    Posts
    5,651

    Default Re: Digi Cabi DB-036: How to adjust height of trays

    Great!

    NovJoe.

  14. #14

    Default Re: Digi Cabi DB-036: How to adjust height of trays

    Yea, the newer versions come with plastic trays + an updated instruction manual with English that makes sense and has more detailed operating instructions.

  15. #15
    Member
    Join Date
    Sep 2009
    Location
    singapore
    Posts
    50

    Default Re: Digi Cabi DB-036: How to adjust height of trays

    where is the warranty card located?

  16. #16
    Member
    Join Date
    Sep 2009
    Location
    singapore
    Posts
    50

    Default Re: Digi Cabi DB-036: How to adjust height of trays

    warranty card is not in the box right? get from the shop right?

  17. #17

    Default Re: Digi Cabi DB-036: How to adjust height of trays

    Quote Originally Posted by NovJoe View Post
    Don't worry, you'll be fine as I've tested removing already.

    NovJoe.
    hey thanks for the advice bro, i got the new version with entirely plastic trays myself.
    having big problems trying to remove the tray in the first place, shall go try out later!
    Canon 1000D, 17-55mm kit lens, 50mm F1.8, 55-250mm IS

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •