WTSell: Others - Ewa Marine underwater housing bag U-AXP100

maui · 4th November 2008

Advertisement Category: Want To Sell (WTS)

Equipment Type: Others
Equipment Brand: Ewa Marine underwater housing bag
Equipment Model: U-AXP100
Price (S$): 650 neg
Description:
ewa-marine U-AXP100
The U-AXP 100 is a special version of the U-AXP housing.

It has a wider frontglass and allows in combination with the C-A 77 adapter (supplied with the housing) and C-A 82 (available as an accessory from your dealer) adapter the use of lenses with a filter thread of 77 and 82mm.

This enables you to use wideangel lenses with a focallength of 17mm without problems.

Lenses with a smaller filterdiameter can also be used in this housing as long as they have internal focus. You just need the right step-up ring.

If the optional BF1 lead weight is inserted into the housing, underneath the camera, it becomes even easier to reach the maximum depth. Experienced photographers have confirmed, that the auto focus and flash both continue to function perfectly. As you descend, the air is pressed into the camera. Due to this, the pressure inside the housing will remain the same as the surrounding water pressure. (this is the reason why ewa-marine housings are so safe to use: implosions are impossible). Due to this, we have to start the dive with a suitable amount of air inside the housing. The foam pads supplied with the housing are part of this air "reservoir" and additional air should also be blown into the housing, via the valve at the rear, to ensure that the maximum potential volume is being utilised.

designed specifically for 35mm SLR cameras, the U-AXP100 housing is manufactured from double laminated PVC and has an integrated, optically neutral flat glass port. The external flash that is commonly used on SLR cameras fits into the specially designed section on the top of the housing.

It has a pair of non-corrosive and seawater resistant clamping rails which fit together for perfect sealing. They tighten by means of three screw knobs.

It is supplied in a handy yellow carry-case which has a water-proof interior and zippered side-pocket.

Technical Information
length 12 - 17 cm ( 4 3/4 - 6 2/3 inches )
width 19 cm ( 7 1/2 inches )
hight 27,5 cm ( 10 3/4inches )
front port diameter 95 mm ( 3 3/4 inches )
Your objective's diameter 77/82mm filter thread
weight 700 g ( 1,55 lbs )

Real Name: JC
Contact Number: 96774232

Condition of Item (as per guidelines): Mint
Warranty Status: 0

Additional Comments:
Used one time.

4th November 2008	#1
maui New Member Join Date: Oct 2004 Location: Tahiti\France Posts: 30	maui WTSell: Others - Ewa Marine underwater housing bag U-AXP100 Advertisement Category: Want To Sell (WTS) Equipment Type: Others Equipment Brand: Ewa Marine underwater housing bag Equipment Model: U-AXP100 Price (S$): 650 neg Description: ewa-marine U-AXP100 The U-AXP 100 is a special version of the U-AXP housing. It has a wider frontglass and allows in combination with the C-A 77 adapter (supplied with the housing) and C-A 82 (available as an accessory from your dealer) adapter the use of lenses with a filter thread of 77 and 82mm. This enables you to use wideangel lenses with a focallength of 17mm without problems. Lenses with a smaller filterdiameter can also be used in this housing as long as they have internal focus. You just need the right step-up ring. If the optional BF1 lead weight is inserted into the housing, underneath the camera, it becomes even easier to reach the maximum depth. Experienced photographers have confirmed, that the auto focus and flash both continue to function perfectly. As you descend, the air is pressed into the camera. Due to this, the pressure inside the housing will remain the same as the surrounding water pressure. (this is the reason why ewa-marine housings are so safe to use: implosions are impossible). Due to this, we have to start the dive with a suitable amount of air inside the housing. The foam pads supplied with the housing are part of this air "reservoir" and additional air should also be blown into the housing, via the valve at the rear, to ensure that the maximum potential volume is being utilised. designed specifically for 35mm SLR cameras, the U-AXP100 housing is manufactured from double laminated PVC and has an integrated, optically neutral flat glass port. The external flash that is commonly used on SLR cameras fits into the specially designed section on the top of the housing. It has a pair of non-corrosive and seawater resistant clamping rails which fit together for perfect sealing. They tighten by means of three screw knobs. It is supplied in a handy yellow carry-case which has a water-proof interior and zippered side-pocket. Technical Information length 12 - 17 cm ( 4 3/4 - 6 2/3 inches ) width 19 cm ( 7 1/2 inches ) hight 27,5 cm ( 10 3/4inches ) front port diameter 95 mm ( 3 3/4 inches ) Your objective's diameter 77/82mm filter thread weight 700 g ( 1,55 lbs ) Real Name: JC Contact Number: 96774232 Condition of Item (as per guidelines): Mint Warranty Status: 0 Additional Comments: Used one time.