PPCP Stetige Launches @ $99.00 (In Stock)

ParkertR · 19th December 2007

The wait has been long, but it has finally paid off! Dear ClubSNAP members, PPCP Online is proud to present to you the Stetige

Priced at only $99.00, this baby is a must for this Christmas! Need a stable set of legs that's sexy as well? The Stetige is the answer. Get yours today!

Introduction

The Stetige (Steady/Constant in German) boasts to be the most affordable 'pro' tripod on the market. Designed for stability, it's 'Super Steady' design and carefully selected weight (1400 grams with head) and height (max at 1450 mm) along with the choice of aluminium, the Stetige is guaranteed to hold your camera steady - as it's name suggests.

Special Design Features

1. The Stetige features Oversized Snap-Lock Levers for maximum feel when deploying. This came about as a result of customers pointing out to us that the PPCP Pro Tripod V1/V2 featured snap-locks that were small and at times, difficult to open and close, hindering the overall setup time. The Stetige does away with that, snapping open and close quickly and easily, without the need to find the lever or having to twist a grip-twist lock.

2. The Stetige features Industrial/Professional Standard Ballhead Mount that will compliment any of the commonly used ballheads in the market. This was once again suggested by customers as the PPCP Pro Tripod V1/V2 featured a ballhead mount that was smaller than professional standard ballheads.

3. The Stetige features a 3 Section 'Super Steady' Leg Design that employs a specific diameter, length, grade of aluminium and weight to each leg. This allows each leg to slide out the moment you unlock the legs - speeding up the deployment time significantly! Although it is true that the Stetige is shorter (lower in max operating height) than the PPCP Pro Tripod V1/V2, it provides a more stable support that neither flexes like the PPCP Pro Tripod V1/V2 or slips like other brands. Standing at just over 1.45m, taller men and women would have to bend over a little, but it is a small price to pay for quick deployment and super stability.

4. The Stetige features Spring Loaded X-treme 3 Step Angle Locking Buttons that enable you to adjust the tripod according to your surroundings! Pull the legs in and the buttons automatically release to lock back at the original angle. No more pulling/pushing/twisting or turning - just press

Specifications

Max Operating Height - 1450mm
Min Operating Height - 360mm (150mm with optional short post)
Max Usable Operating Load (Tripod) - 9.0kg (Recommended below 9.0kg)*
Max Usable Operating Load (Supplied Head) - 4.5kg (Recommended below 3.0kg)
Closed Length - 500mm (Made to fit the Uber Rugged Tripod Case)
Built-in Sprit Level
X-Treme Quick 3 Step Angle Locking Mechanism
Carrying Weight - 1400g

*Max Operating Load has been increased with new shipment of pods frm 1st Jan 2008

Price: SGD$99.00

Want more for your Stetige? UPGRADE!

Customize your Stetige with:

1. PPCP Uber Rugged Tripod Case

A custom fit for your Stetige!
Lifetime Warranty as well!

2. PPCP Stetige Professional Ballhead

Weighs in at ONLY 350 Grams!
Carries up to 7kg Load!
Professional build quality!
Arca-Swiss Compatible!

ParkertR · 19th December 2007

Full Tripod Shot

Close-up of the new OVERSIZED SNAP LOCKS

Bubble Spirit Level and Easy to use Thumb Lock/Release Mechanism

The Stetige stock ballhead that supports up to 4.5kg (The 'frotto plate actually fits!)

ParkertR · 19th December 2007

A closer look at the ballhead without the plate - see the locking pin?

The plate

How low can our Stetige go.....?

How low can it still go?

SUPER-LOW mode with the camera at just over 26cm from the ground! (with optional short post that will be available in 2008)

ParkertR · 19th December 2007

Get your STETIGE today by clicking the image below! Or visiting MS Color Service (Ang Mo Kio ave 8)

Each Stetige set comes with a 1 year warranty from PPCP Online

Each Package includes:
1 x Stetige Tripod
1x Stetige Ballhead
1x Stetige Carry Case

ParkertR · 19th December 2007

The Stetige comes packed in a plain white box labeled 'Stetige'. It's 'naked' leg has a tattoo of it's name 'Stetige' etched into the aluminium. She comes with a carrying case and a supplied ballhead - all at $99.00.

rOnGrEn · 19th December 2007

hmmz.. is there an option to upgrade the ballhead? I thought I saw a picture of another ballhead fixed on the stetige in the other thread...

And is this design finalised? Will there be a Stetige v2 anytime soon?

ParkertR · 19th December 2007

Hi rongren, the Stetige took a while to conceive and it would be a while before any successor to the Stetige is out

Meanwhile, the optional items will only be available in early 2008:

1. Short Post
2. Spare Quick Plates
3. Pro Ballhead

Randius · 19th December 2007

Is the upcoming pro ball head Arca-Swiss compatible?

ParkertR · 19th December 2007

Hi Randius, yes the ballhead that's coming out next year is designed to be compatible with Arca-Swiss plates.

likimikuku · 19th December 2007

sorry.. where can i get 1??
beside (online)
i dun hav c.card..

any shop selling ???

FilterFunk · 19th December 2007

sent PM, pls advice.

vendeta · 19th December 2007

bro hope you answer your pm's

Expiredyoghurt · 20th December 2007

Originally Posted by likimikuku

sorry.. where can i get 1??
beside (online)
i dun hav c.card..
any shop selling ???

Hi likimikuku,

MS Color is carrying some stock of the PPCP Stetige tripod.

ParkertR · 20th December 2007

Thank you for your support for the STETIGE! 6 Units have been sold since it's launch! We know you will love this tripod!

mrlee1912 · 20th December 2007

Hi,

I want to purchase the tripod and I want to self-collect but cannot find that options on your website. Please advice.

Thanks.

ParkertR · 20th December 2007

have PM'd u

clarence2116 · 23rd December 2007

interested man.. lemme try to sell my cheap tripod away first..

ParkertR · 23rd December 2007

cheers

stock is movin movin movin. Ppl are lovin lovin lovin too~ get yours soon!

ParkertR · 23rd December 2007

Dear all, MS Color Service is now carrying stock of the PPCP Stetige. Get yours today @ only $99.00!

Happy Holidays!

likimikuku · 29th December 2007

Originally Posted by ParkertR

Dear all, MS Color Service is now carrying stock of the PPCP Stetige. Get yours today @ only $99.00!

Happy Holidays!

as some ppl told me..
MS colour r selling at 120..??!!?!
is that the right info??

19th December 2007	#1
ParkertR Senior Member Join Date: Jun 2004 Location: Singapore/Thailand Posts: 5,804	PPCP Stetige Launches @ $99.00 (In Stock) The wait has been long, but it has finally paid off! Dear ClubSNAP members, PPCP Online is proud to present to you the Stetige Priced at only $99.00, this baby is a must for this Christmas! Need a stable set of legs that's sexy as well? The Stetige is the answer. Get yours today! Introduction The Stetige (Steady/Constant in German) boasts to be the most affordable 'pro' tripod on the market. Designed for stability, it's 'Super Steady' design and carefully selected weight (1400 grams with head) and height (max at 1450 mm) along with the choice of aluminium, the Stetige is guaranteed to hold your camera steady - as it's name suggests. Special Design Features 1. The Stetige features Oversized Snap-Lock Levers for maximum feel when deploying. This came about as a result of customers pointing out to us that the PPCP Pro Tripod V1/V2 featured snap-locks that were small and at times, difficult to open and close, hindering the overall setup time. The Stetige does away with that, snapping open and close quickly and easily, without the need to find the lever or having to twist a grip-twist lock. 2. The Stetige features Industrial/Professional Standard Ballhead Mount that will compliment any of the commonly used ballheads in the market. This was once again suggested by customers as the PPCP Pro Tripod V1/V2 featured a ballhead mount that was smaller than professional standard ballheads. 3. The Stetige features a 3 Section 'Super Steady' Leg Design that employs a specific diameter, length, grade of aluminium and weight to each leg. This allows each leg to slide out the moment you unlock the legs - speeding up the deployment time significantly! Although it is true that the Stetige is shorter (lower in max operating height) than the PPCP Pro Tripod V1/V2, it provides a more stable support that neither flexes like the PPCP Pro Tripod V1/V2 or slips like other brands. Standing at just over 1.45m, taller men and women would have to bend over a little, but it is a small price to pay for quick deployment and super stability. 4. The Stetige features Spring Loaded X-treme 3 Step Angle Locking Buttons that enable you to adjust the tripod according to your surroundings! Pull the legs in and the buttons automatically release to lock back at the original angle. No more pulling/pushing/twisting or turning - just press Specifications Max Operating Height - 1450mm Min Operating Height - 360mm (150mm with optional short post) Max Usable Operating Load (Tripod) - 9.0kg (Recommended below 9.0kg)* Max Usable Operating Load (Supplied Head) - 4.5kg (Recommended below 3.0kg) Closed Length - 500mm (Made to fit the Uber Rugged Tripod Case) Built-in Sprit Level X-Treme Quick 3 Step Angle Locking Mechanism Carrying Weight - 1400g Max Operating Load has been increased with new shipment of pods frm 1st Jan 2008 Price: SGD$99.00* Want more for your Stetige? UPGRADE! Customize your Stetige with: 1. PPCP Uber Rugged Tripod Case A custom fit for your Stetige! Lifetime Warranty as well! 2. PPCP Stetige Professional Ballhead Weighs in at ONLY 350 Grams! Carries up to 7kg Load! Professional build quality! Arca-Swiss Compatible! __________________ Budget wedding photographer :) Last edited by ParkertR; 3rd January 2008 at 03:20 PM.

19th December 2007	#2
ParkertR Senior Member Join Date: Jun 2004 Location: Singapore/Thailand Posts: 5,804	Stetige: Additional Product Images Full Tripod Shot Close-up of the new OVERSIZED SNAP LOCKS Bubble Spirit Level and Easy to use Thumb Lock/Release Mechanism The Stetige stock ballhead that supports up to 4.5kg (The 'frotto plate actually fits!) __________________ Budget wedding photographer :)

19th December 2007	#3
ParkertR Senior Member Join Date: Jun 2004 Location: Singapore/Thailand Posts: 5,804	Stetige: Additional Product Images II A closer look at the ballhead without the plate - see the locking pin? The plate How low can our Stetige go.....? How low can it still go? SUPER-LOW mode with the camera at just over 26cm from the ground! (with optional short post that will be available in 2008) __________________ Budget wedding photographer :) Last edited by ParkertR; 19th December 2007 at 12:59 AM.

19th December 2007	#4
ParkertR Senior Member Join Date: Jun 2004 Location: Singapore/Thailand Posts: 5,804	Buy Now! Get your STETIGE today by clicking the image below! Or visiting MS Color Service (Ang Mo Kio ave 8) Each Stetige set comes with a 1 year warranty from PPCP Online Each Package includes: 1 x Stetige Tripod 1x Stetige Ballhead 1x Stetige Carry Case __________________ Budget wedding photographer :) Last edited by ParkertR; 23rd December 2007 at 07:59 PM.

19th December 2007	#5
ParkertR Senior Member Join Date: Jun 2004 Location: Singapore/Thailand Posts: 5,804	More pictures The Stetige comes packed in a plain white box labeled 'Stetige'. It's 'naked' leg has a tattoo of it's name 'Stetige' etched into the aluminium. She comes with a carrying case and a supplied ballhead - all at $99.00. __________________ Budget wedding photographer :) Last edited by ParkertR; 19th December 2007 at 01:23 AM.

19th December 2007	#6
rOnGrEn Member Join Date: Jan 2005 Location: Hougang Posts: 1,482	Re: PPCP Stetige Launches @ $99.00 (In Stock) hmmz.. is there an option to upgrade the ballhead? I thought I saw a picture of another ballhead fixed on the stetige in the other thread... And is this design finalised? Will there be a Stetige v2 anytime soon?

19th December 2007	#8
Randius Senior Member Join Date: Mar 2006 Posts: 2,744	Re: PPCP Stetige Launches @ $99.00 (In Stock) Is the upcoming pro ball head Arca-Swiss compatible?

19th December 2007	#10
likimikuku Member Join Date: Nov 2007 Location: currently Dubai Posts: 398	Re: PPCP Stetige Launches @ $99.00 (In Stock) sorry.. where can i get 1?? beside (online) i dun hav c.card.. any shop selling ???

19th December 2007	#11
FilterFunk Senior Member Join Date: Apr 2006 Location: 卧龙岗 Posts: 2,660	Re: PPCP Stetige Launches @ $99.00 (In Stock) sent PM, pls advice.

19th December 2007	#12
vendeta Member Join Date: Sep 2002 Posts: 251	Re: PPCP Stetige Launches @ $99.00 (In Stock) bro hope you answer your pm's

20th December 2007	#14
ParkertR Senior Member Join Date: Jun 2004 Location: Singapore/Thailand Posts: 5,804	6 Units sold! Thank you for your support for the STETIGE! 6 Units have been sold since it's launch! We know you will love this tripod! __________________ Budget wedding photographer :)

20th December 2007	#15
mrlee1912 New Member Join Date: Feb 2006 Posts: 48	Re: PPCP Stetige Launches @ $99.00 (In Stock) Hi, I want to purchase the tripod and I want to self-collect but cannot find that options on your website. Please advice. Thanks.

23rd December 2007	#17
clarence2116 Member Join Date: Nov 2007 Posts: 132	Re: PPCP Stetige Launches @ $99.00 (In Stock) interested man.. lemme try to sell my cheap tripod away first.. __________________ http://flickr.com/photos/clars-pj

23rd December 2007	#19
ParkertR Senior Member Join Date: Jun 2004 Location: Singapore/Thailand Posts: 5,804	Stetige available at MS Color Service Dear all, MS Color Service is now carrying stock of the PPCP Stetige. Get yours today @ only $99.00! Happy Holidays! __________________ Budget wedding photographer :)