Results 1 to 11 of 11

Thread: how to take 360 degree pic?

  1. #1

    Default how to take 360 degree pic?

    does it need any special equitment?
    ****.. i have only nikon d80, and kit lens... without flash also...
    tripod is just very normal one too...
    very urgent.. pls help...

  2. #2

    Default Re: how to take 360 degree pic?

    You may need a tripod.
    Take several shots and stitch them together by using PS or other software (you can google for it).

    Hope this is help.
    Your fastest camera is as fast as your slowest lens

  3. #3

    Default Re: how to take 360 degree pic?

    lol tripod which enables panning ? a tripod for video cam would be better. Orelse stitching would be a painful task. for stitching in PS, simply use a oversized canvas, place the pictures on the canvas and while reducing transparency of the overlapping picture to say 30%, try to piece them together. Finally revert transparency and crop. Alternatively there are software which can help u do that easily, plugins too.

    Cheers

  4. #4

    Default Re: how to take 360 degree pic?

    Read up this site www.panoguide.com
    See my Photo Gallery at the Clubsnap

  5. #5

    Default Re: how to take 360 degree pic?

    ****.. it is so hard... dun kow how to take b

    i have only alpha 100 with kit lens, and ball head tripod... i tried vertical and horizontal, cant stitch the pic... i only got photoshop

    i tried 35mm/30degree, 50mm/30 degree, 18mm/90degree/45 degree, all pic cant really stitch together

    i was thinking is the environment can be an issue?
    coz that shop is long square's shape...

  6. #6

    Default Re: how to take 360 degree pic?

    the lighting a bit prob too, i using A mode, but few corners look darker

  7. #7

    Default Re: how to take 360 degree pic?

    Quote Originally Posted by averynkh View Post
    ****.. it is so hard... dun kow how to take b

    i have only alpha 100 with kit lens, and ball head tripod... i tried vertical and horizontal, cant stitch the pic... i only got photoshop

    i tried 35mm/30degree, 50mm/30 degree, 18mm/90degree/45 degree, all pic cant really stitch together

    i was thinking is the environment can be an issue?
    coz that shop is long square's shape...
    Did you use a pano head ? Did you take in portrait position ?
    For me, usually at 28mm ( after magnification ), I use 30 degree to rotate. You need 20% overlap at each side in order to get good stitching.
    What stitching software are you using ?
    See my Photo Gallery at the Clubsnap

  8. #8

    Default Re: how to take 360 degree pic?

    Quote Originally Posted by averynkh View Post
    the lighting a bit prob too, i using A mode, but few corners look darker
    Recommend to use manual mode for consistant exposure.
    See my Photo Gallery at the Clubsnap

  9. #9

    Default Re: how to take 360 degree pic?

    i juse using a ball head tripod...
    and i using cs3 to stitch, result pretty good...
    so far is ok.. later i got to take another shop, so bored...
    i dun really set the turning degree... just keep less than 8 pic..

  10. #10

    Default Re: how to take 360 degree pic?

    Quote Originally Posted by averynkh View Post
    i juse using a ball head tripod...
    and i using cs3 to stitch, result pretty good...
    so far is ok.. later i got to take another shop, so bored...
    i dun really set the turning degree... just keep less than 8 pic..
    If you dun use pano head, you may experience horizon not level issue and unable to capture wider angle view, thus your pano shot will end up very long.
    See my Photo Gallery at the Clubsnap

  11. #11

    Default Re: how to take 360 degree pic?

    Quote Originally Posted by averynkh View Post
    the lighting a bit prob too, i using A mode, but few corners look darker
    can try to use smaller aperture for less vignetting problem?

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •