Results 1 to 7 of 7

Thread: Linksys WAP11 ver 2.2

  1. #1
    Moderator
    Join Date
    Jan 2002
    Location
    Singapore
    Posts
    1,165

    Default Linksys WAP11 ver 2.2

    I upgraded the Linksys Wireless Access Point firmware to 1.1 and the WAP11 access stops functioning. Anyone ever encountered the same experience and know the cure?

  2. #2

    Default Re: Linksys WAP11 ver 2.2

    Originally posted by rty
    I upgraded the Linksys Wireless Access Point firmware to 1.1 and the WAP11 access stops functioning. Anyone ever encountered the same experience and know the cure?
    one thing i can say: jialat liao

    Know someone with same prob, dunno how to solve.

  3. #3

    Default Re: Linksys WAP11 ver 2.2

    Originally posted by rty
    I upgraded the Linksys Wireless Access Point firmware to 1.1 and the WAP11 access stops functioning. Anyone ever encountered the same experience and know the cure?
    How about bringing it back to LinkSys service center?

  4. #4

    Default

    have you tried hard resetting the AP?

  5. #5
    Moderator
    Join Date
    Jan 2002
    Location
    Singapore
    Posts
    1,165

    Default

    Originally posted by cyanbloodbane
    have you tried hard resetting the AP?
    Yes, I have. Pressed the reset button. I even powered it off.


  6. #6
    Member
    Join Date
    Jan 2003
    Location
    Singapore
    Posts
    209

    Default Re: Linksys WAP11 ver 2.2

    RTY, why not perform a hardware reset. Enter to the config page using the factory default IP address. Once you get in, reconfig your setting to your previous choice. I suspect once you upgrade your firmware, all setting back to default. Hope this helped.



    Originally posted by rty
    I upgraded the Linksys Wireless Access Point firmware to 1.1 and the WAP11 access stops functioning. Anyone ever encountered the same experience and know the cure?

  7. #7
    Moderator
    Join Date
    Jan 2002
    Location
    Singapore
    Posts
    1,165

    Default

    Problem solved!

    I did some searches on the web and found few links on hacking the Linksys AP WAP11 2.2 to turn it into D-LINK DWL-900AP+. After the hack, it works like a charm now! Yes, the warranty is now void.

    pcman, pressing hardware reset button won't help restoring the firmware.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •