Nikon NX woes....

[xziredmp]

Hi all...

i have this question in my mind now, the nikon nX is one of the better photoediting softwares around that i am using now.

the problem lies in the batch processing, i cant process all 1599 images at one go. it will show up "Failed" when it finishes its process.

and when i tried batch processing in 50 images per folder, it works ok.

is there a solution where i can process lets say 500 all at once ?

or could it be my machine ? (like not enough resources ? )

hope to see some advices from the seasoned pros here.

[ernest_ted]

did u limit the cache size ??


Edit > Preference > Cache Settings >

[xziredmp]

this is the settings in the cache settings.

Use image cache to increase speed of application (checked)

Cache Files Saved Within the Editor (checked)

Cache Files Created in a Batch Process (checked)


Cache Location: (70GB available space)

Limit Cache Size (checked)

10GB / 365 images ( this is the setting i tried... )

[ernest_ted]

Originally Posted by xziredmp Cache Location: (70GB available space) Limit Cache Size (checked) 10GB / 365 images ( this is the setting i tried... )

iirc, the cache size will limit how many files u can process in a batch....

the max cache size will also depend on your HDD size...

[xziredmp]

this is setting i used after your recommendation.

Everything under Cache Settings is checked except for:

Limit Cache Size.



attempted to process 300 images at once. (all failed)



any solutions to this ?

[ernest_ted]

sorry, i shd have said unchecked the limit cache box.

the max no will also depend on your hdd size.

perhaps other NX users could advise as i had never process more than 200 pics.

[ExplorerZ]

I got no problem processing over 300pic with limited cache size unchecked

[TMC]

cant remember my settings but 500 at one go has been done on my old 12" before.

[xziredmp]

i still cant batch process all my images....

it shows "Processing" after a 1-2 seconds it shows "Failed"

so i should reinstall my NX ?

[xziredmp]

ok guys.. i managed to run the batch process of all my images at one go..

this is what i've done previously.


Batch>Run Batch Process>Choose Folder>Choose Process File>Process


now the solution


Open Image>Load Settings (Pre saved)>Choose folder>Choose Process File>Process


now its all processing... have to check if the other files are done to.. so far this is the updates i have.

[glennyong]

hmmm.. actually hor. i faced the same problem.

but i can process about 70-80 files at one go only leh.

anything more than that. i get things like failed to process or something ?

[TMC]

it is the files settings. I found that after I upgraded my NX. I can batch process more.

[nicekit]

guys..
if we buy from nikon singapore the capture nx

will it be the latest one? i think it is 1.2 now?

i am using Lightroom at the moment ...

[TMC]

update off the net i think.

[nicekit]

anybody can confirm this?

[Squid]

Originally Posted by nicekit anybody can confirm this?

The current version available for download from the web is Nikon CaptureNX 1.2.0

[artbox]

Tought it's only for MS Vista interface.
Had downloaded it but could not install on my MS XP.

Originally Posted by Squid The current version available for download from the web is Nikon CaptureNX 1.2.0

[Squid]

Originally Posted by artbox Tought it's only for MS Vista interface. Had downloaded it but could not install on my MS XP.

I'm operating Nikon CaptureNX 1.2.0 on Microsoft Windows XP installed with .NET 2.0 (which must downloaded from web) and not comes pre-installed like in Windows Vista, IIRC

[artbox]

Thanks. Me already had that installed during the 1.1 ver which required before installation.
Maybe mine is a XP home.
Will try again. tq

Originally Posted by Squid I'm operating Nikon CaptureNX 1.2.0 on Microsoft Windows XP installed with .NET 2.0 (which must downloaded from web) and not comes pre-installed like in Windows Vista, IIRC

[Squid]

Originally Posted by artbox ...... Me already had that installed during the 1.1 ver which required before installation.

Nikon CaptureNX 1.0 to 1.1 requires .NET 1.1
Nikon CaptureNX 1.2 requires .NET 1.1

OT, Nikon CaptureNX 1.2.1 maybe on the way as ice hockey picture and monkey picture posted on Rob Galbraith website were processed by Nikon CaptureNX 1.2.1