Page 1 of 3 123 LastLast
Results 1 to 20 of 42

Thread: R/C modelling!

  1. #1
    Senior Member
    Join Date
    May 2003
    Location
    State of Confusion
    Posts
    2,196

    Thumbs up R/C modelling!

    Dug up a (not so) old thread Who plays R/C cars here ?, but since it's expired, I've decided to start a new one.

    Just got me the Tamiya Avante Mk.ii. Yes, it's just a bodyshell, but it's kinda like a blast from the past for me. When the original Avante came out, all I could do was dream and drool about it.


    My ride, in translucent orange.


    DF-03 (stock) & TT-01 (customised)

    More pics here.

    (Got kinda lazy with the photography. I was more excited about the model than with with photography! Sony Alpha-100, Tamron 17-50mm f/2.8. ISO400, f/8, 1/60s. Hotshoe mounted flash, aimed at ceiling, Lightsphere clear, no dome. Tablecloth background.)

  2. #2

    Default Re: R/C modelling!

    Hi dude. I'm into RC planes actually. Not really a kind of 'modelling' but hey it's R/C. Just built my first recently.


    Newly built


    At the field, numerous crashes and repairs later

    Cool... I didn't know Advante was a RC kit! I played with the Advante Jr when I was a child.

  3. #3

    Default Re: R/C modelling!

    I use a TA-04S.. been some years since I last played. Time to get new batteries. Any shops you all frequent?

  4. #4

    Default Re: R/C modelling!

    Hohoho I see a DF03!!!

    Check out my vids:
    1) http://www.youtube.com/watch?v=tuG1arvtMNM
    2) http://www.youtube.com/watch?v=GMFeaiAJnP4

    My DF03 is using a 5700kV Mamba Max brushless, makes it darn fast and fun! But it already wears down the rear ball diff plates after a minute or so. -_-" Heh, it regularly entertains the neighbourhood kids.






    My TA05 and gf's TT01


    Anyway, for the buggy, be very careful of repeated high impact tumbles. The shock towers and even the shock tower mounts, especially the rear bulkhead can start to crack if you give it too much abuse. That happened with mine and I had to replace a pair of shock towers and the rear bulkhead (Part A1 iirc)

    If you're gonna go with a more powerful motor, slipper clutch is an absolute must. As for universal shafts, the DF02 ones fit perfectly. 3Racing's hard diff outdrives (front and rear) are recommended. Basically anything that beefs up the drivetrain is good if you intend to go faster.

  5. #5

    Default Re: R/C modelling!

    I had cut out intakes and vents on the Dark Impact body as the Mamba Max ESC got darn hot during runs. Probably due to the summer time weather those months ago. The front vent here



    is directly in front of the ESC's heatsink fins. Got wire mesh to cover up the hole a bit to stop stones etc flying in.

    And another vent to let the hot air out


    In the earlier post, you'll notice a triangular vent on the top. I'm hoping that lets the heat dissipate a bit from the motor's heat sink bars.

    My buggy's electronics layout:



  6. #6

    Default Re: R/C modelling!

    And the damage I mentioned to be careful of...





    And look what the Mamba did to my rear diff plates!



  7. #7
    Senior Member
    Join Date
    May 2003
    Location
    State of Confusion
    Posts
    2,196

    Default Re: R/C modelling!

    Heh. Hardcore man, TheoDR.

    The pink TT-01 looks real sweet. Kinda fragile, isn't it? Under moderate speed crash, the front adjustable arm keeps breaking! And changing the motor and accessing the gearbox is such a pain.

    I'll run my DF-03 with the standard stock parts first lah. Then slowly add bits here and there as and when time (and the wallet) allows.

    I usually get my stuff from Hobby Link @ FE Plaza, but I recently found out that some of the parts and accs quite a bit more expensive than Elite Racing, ley. Is buying online good?

  8. #8
    Senior Member
    Join Date
    May 2003
    Location
    State of Confusion
    Posts
    2,196

    Default Re: R/C modelling!

    Quote Originally Posted by Takumi View Post
    Hi dude. I'm into RC planes actually. Not really a kind of 'modelling' but hey it's R/C. Just built my first recently.


    Newly built


    At the field, numerous crashes and repairs later

    Cool... I didn't know Advante was a RC kit! I played with the Advante Jr when I was a child.
    Wah, cool. Scratch-built, ah?

    My place (Woodlands Drive 16 area) has this big field that has some really people who are seriously into aero r/c. Come in a van, unload metal boxes, take out deck chair, foldable tables, etc. Quite impressive, some of these planes can really tear thru the skies.

    For me, I already have trouble controlling a vehicle on two-axes. I think if add a third, my model might just kill somebody.

  9. #9

    Default Re: R/C modelling!

    Quote Originally Posted by synapseman View Post
    Wah, cool. Scratch-built, ah?

    My place (Woodlands Drive 16 area) has this big field that has some really people who are seriously into aero r/c. Come in a van, unload metal boxes, take out deck chair, foldable tables, etc. Quite impressive, some of these planes can really tear thru the skies.

    For me, I already have trouble controlling a vehicle on two-axes. I think if add a third, my model might just kill somebody.
    Now all playing turbine jet, these engines are really fast zips thru the sky at 200mph burning kerosene or jet fuel, engine cost some S$5000++.http://www.youtube.com/watch?v=tErGXfwMI0I Just look at the awesome takeoff, such a short distance to liftoff, the amount of power generated is crazy.http://www.youtube.com/watch?v=OFFWm...elated&search=
    Last edited by Sniper ShutterBug; 13th September 2007 at 01:16 AM.

  10. #10
    Senior Member Halfmoon's Avatar
    Join Date
    Feb 2005
    Location
    Hougang, Singapore.
    Posts
    4,590

    Default Re: R/C modelling!

    I am just curious how much does it cost to buy a RC car and mod it???

    I am referring to those run on track ones.... not the buggy type... is there a new for that class???

    Thanks.
    Art is perception; Perception is art.

  11. #11

    Default Re: R/C modelling!

    Quote Originally Posted by Halfmoon View Post
    I am just curious how much does it cost to buy a RC car and mod it???

    I am referring to those run on track ones.... not the buggy type... is there a new for that class???

    Thanks.
    Are you refering to Mini Z? Smallest of the RC cars

  12. #12
    Senior Member Halfmoon's Avatar
    Join Date
    Feb 2005
    Location
    Hougang, Singapore.
    Posts
    4,590

    Default Re: R/C modelling!

    Quote Originally Posted by Sniper ShutterBug View Post
    Are you refering to Mini Z? Smallest of the RC cars
    I saw people racing them at turf city...... Maybe 1/10 or 1/8......
    Art is perception; Perception is art.

  13. #13
    Senior Member
    Join Date
    May 2003
    Location
    State of Confusion
    Posts
    2,196

    Default Re: R/C modelling!

    Quote Originally Posted by Halfmoon View Post
    I am just curious how much does it cost to buy a RC car and mod it???

    I am referring to those run on track ones.... not the buggy type... is there a new for that class???

    Thanks.
    I guess depending on scale (1/8, 1/10, 1/12) and if it's gas or electric powered. For my 1/10 scale on-road electric TT-01, the basic kit is approx $170. The upgrades could cost about three or four times the cost of the basic kit. Actually, the sky's the limit if you want everything top-of-the-range high-end.

  14. #14
    Senior Member Halfmoon's Avatar
    Join Date
    Feb 2005
    Location
    Hougang, Singapore.
    Posts
    4,590

    Default Re: R/C modelling!

    Ok... look something like this...

    http://www.tamiya.com/english/rc/rci...t/kit58012.htm
    Art is perception; Perception is art.

  15. #15

    Default Re: R/C modelling!

    Quote Originally Posted by synapseman View Post
    Heh. Hardcore man, TheoDR.

    The pink TT-01 looks real sweet. Kinda fragile, isn't it? Under moderate speed crash, the front adjustable arm keeps breaking! And changing the motor and accessing the gearbox is such a pain.

    I'll run my DF-03 with the standard stock parts first lah. Then slowly add bits here and there as and when time (and the wallet) allows.

    I usually get my stuff from Hobby Link @ FE Plaza, but I recently found out that some of the parts and accs quite a bit more expensive than Elite Racing, ley. Is buying online good?
    Heya! Thanks! Hmm, ok la, gf's car still running on stock motor, so don't have to change much. As for buying online, I like to get my stuff from:

    1)www.stellamodels.net
    2)http://www.rc-champ.co.jp/Champ_Inte...onal_index.htm

    The 2nd link is from a japanese site, I've ordered twice with them before and was very impressed. They have staff who are able to correspond in english, so no prob there. Plus also they usually have a 10-20% discount on their items and are willing to order in spare parts for you. Shipping took less than a week to reach me in Australia.

    By the way, Aussie prices are crazy! The DF03 sells for about SG$230+ in Sg right? In Aus it sells for about AU$290! *faints*

    Price-wise from both online sites, even with shipping, I daresay they might be a little bit cheaper than what's offered in S'pore. With shipping to Aus, the DF03 price was SG$5 more ex than those sold in S'pore. Shipping to S'pore should be cheaper too if I'm not wrong.

    Oh ya, don't put titanium screws on your buggy, they can and will snap/bend/break under hard impact, especially on high stress areas like the wing mounts. I've had them snap and break already, so switched back to the stock steel ones. They work much better!
    Last edited by TheoDR; 13th September 2007 at 08:06 AM.

  16. #16

    Default Re: R/C modelling!

    Quote Originally Posted by Halfmoon View Post
    Oooo that's the 1/10th scale touring car class

  17. #17

    Default Re: R/C modelling!

    Anyone doing a MO for 7.2v batteries? I want to rekindle the interest.

  18. #18

    Default Re: R/C modelling!

    Quote Originally Posted by Sausage View Post
    Anyone doing a MO for 7.2v batteries? I want to rekindle the interest.
    Ya thinking of getting one set of batteries and make a pack myself and get a proper charger but this month spending quite a lot of money. Later my wife kill me. My 1/10 scale Toyota Supra long time not running, remember it clocked 90kmh++ the last time I ran it
    Last edited by Sniper ShutterBug; 13th September 2007 at 12:51 PM.

  19. #19

    Default Re: R/C modelling!

    Quote Originally Posted by Halfmoon View Post
    I am just curious how much does it cost to buy a RC car and mod it???

    I am referring to those run on track ones.... not the buggy type... is there a new for that class???

    Thanks.
    S$300++ for basic model then option parts another S$300++ for modding and added performance. Then another S200 for transmitter and ESC and Servo.

  20. #20

    Default Re: R/C modelling!

    Quote Originally Posted by Sniper ShutterBug View Post
    Ya thinking of getting one set of batteries and make a pack myself and get a proper charger but this month spending quite a lot of money. Later my wife kill me. My 1/10 scale Toyota Supra long time not running, remember it clocked 90kmh++ the last time I ran it
    Haha, to tempt you, I'd like to inform that Tamiya has re-released the street Supra body on the TT01D+LED light kit

Page 1 of 3 123 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •