![]() |
|
|||||||
| Consumers Corner Want to find out or give info on where, how much, how good, what to buy? Here is where you should be. |
|
|
|
|
Thread Tools |
|
|
#1 |
|
Member
Join Date: Jul 2006
Posts: 353
|
Hi, is there anybody the user of this HD-30 dry-cabi? actually i just purchased this dry-cabi. i just need to know how to do the first time setting, in the user manual it stated as high(60-70%), Midium(40-60%) and Low(30-40%). Stated it will take btw 4-6 hrs for it to reach the point. Im quite comfused with the setting,i set the setting at Low(30-40%) and i waited for 6 hrs but the analog meter still show 85.... pls help
![]() |
|
|
|
|
#2 |
|
Member
Join Date: Jul 2006
Posts: 353
|
Anyone......?
|
|
|
|
|
#3 | |
|
New Member
Join Date: Nov 2006
Posts: 28
|
![]() I had the same problem as yours last time. then i set the knob to highest (turn to ur right till the brightest led). wait for about 6 hours. the meter should indicate some adjustments. It is advisable not to put anything inside first to keep the meter stable first. Then when it reach the desired level, put ur stuffs inside. (the level might change depends on the volume n type of your stuffs), adjust again.. voila... ur stuff is safe inside ![]() If its still not working, call the shop n ask for a new one.. warranty should be 5 years i suppose.. good luck !
__________________
Photograph captures time... It remembers little things, long after you have forgotten everything. |
|
|
|
|
|
#4 | |
|
Member
Join Date: Jul 2006
Posts: 353
|
|
|
|
|
|
|
#5 |
|
Member
Join Date: Jul 2006
Posts: 353
|
And also the LED light will cut off by itself right if it reach the desired level?
|
|
|
![]() |
| Bookmarks |
| Thread Tools | |
|