Capture NX 1.2 is out!

[linse]

• Speed improvement when opening images.
• When any of the operations listed below are performed, "Updating image" is now displayed in the image window title bar. Enhancements and other operations can still be performed while "Updating image" is displayed.

• An image is opened.
• A different version is selected from the "Version" menu.
• "Revert" is selected from the "File" menu.

• When "Open With..." is selected from the "File" menu for an image saved to CD-R or non-recordable medium, the image is first copied to a separate location and then opened in the other application.

• An issue when "Show Lost Shadows" was selected from the "View" menu, and the image display ratio was reduced, the range of lost shadows was also reduced. This issue has been resolved.
• An issue where the "Size / Resolution..." was edited and saved with the "Save Settings..." , and that settings file was used to batch process images in different orientations, the resulting aspect ratio was incorrect, has been resolved.
• A issue that prevented the saving of images when the size or resolution was set particularly high using the "Size / Resolution.." option in the Edit menu has been resolved.
• An issue that caused RAW NEF images captured with the D1X at an ISO of 570 to appear completely black has been resolved.
• An issue that caused images to be affected when saved with a high "Radius" value in the "Gaussian Blur" has been resolved.
• An issue where after an image was enhanced with the selection of "D-Lighting..." from the "Light" submenu in the "Adjust" menu, and then another image was opened and displayed, a black band through the middle of the image, has been resolved.
• An issue that prevented the saving of images edited with the "Adjust > Color Profile..." and "Adjust > Color > LCH..." options has been resolved.
• An issue with incorrect displays or missing windows in the "Help > Contents" section was resolved.
• When "Color Lightness, Chrome, and Hue" settings in the LCH palette were saved with "Batch > Save Settings..." and these settings then applied to a different image, the "Width" sliders did not display correctly. This issue has been resolved.
• An issue that caused differences in values displayed in the "Levels and Curves" palette and those displayed in the "Photo Info" palette's "Watch Points" has been resolved.
• When "All" was selected in the "Advanced" portion of the "Color Control Point" dialog and a new "Color Control Point" was added, the setting for the new "Color Control Point" reverted to the default setting (BCS). This issue has been resolved.
• When any of the Control Point "settings" palettes were minimized and any of the Control Point sliders moved, they reverted to their original position. This issue has been resolved.
• When an internal and external hard disk contain folders with the same name, the folders in each disk were displayed in different order in the "File Directory". They are now displayed in the same order.
• An issue that caused an error message to be displayed when the "Rotate" tool was clicked for a folder selected in the "Browser" has been resolved.
• An issue that caused an error message to be displayed and prevented printing when printing was initiated while thumbnails were loading in the "Browser" has been resolved.
• An issue that caused an error message to be displayed and prevented printing when attempting to print from a 6x9 in. compatible printer with "6x9 inch" selected in the "Page Layout" panel of the "Print layout" dialog has been resolved.
• When the font size used for printing photo information (meta data) was modified using the "Change..." button in the "Meta Data" dialog ('Print layout' dialog > 'Meta Data...' button), 'Detail Information' was not properly printed. This issue has been resolved.
• When images were printed using the printer profile specified in the "Color Management" panel of the "Preferences", the specified profile was only reflected in portions of the printed images. This issue has been resolved.
• An issue that prevented the opening of 2-byte characters from the "File > Open Image..." has been resolved.
• When attempting to open images saved to folders with long names, or images with long file names, an error message was displayed and the image(s) could not be opened. This issue has been resolved.
• When the file names of images for which "00" was included in the shooting time, were changed with the 'File Naming' options specified below, the new file names were not applied correctly. This issue has been resolved.
  • "None" was selected for both Prefix and Suffix.
  • "Sequential Number" was changed to "Date/Time Shot" and the "yymmdd" and "hhmmss" options were selected.
• When multiple images were enhanced and then saved one at a time as separate files with "File > Save As...", an error message was displayed while the images were being saved. This issue has been resolved.
• When the "Turn of DEP for all programs and services except those I select:" option in the "Data Execution Prevention" panel, opened by clicking the "Settings" button in the "Advanced" panel of the "System Properties" dialog was selected, images could not be saved. This issue has been resolved. (Windows XP)
• When images processed with batch processing were displayed in the "Browser", black squares were displayed in the corners of the thumbnails. This issue has been resolved. (Windows 2000)
• When the "Automatically move pointer to the default button in a dialog box" option was selected in the "Pointer Options" panel of the "Mouse Properties" dialog, clicking on a Control Point would cause the mouse to move unexpectedly. This issue has been resolved.
• An issue that caused a pen tablet being used to suddenly stop responding has been resolved.

[longkangman]

That many fix but thanks.

[yyD70S]

Wow! Thank you

[deadpixel]

Cool!!

What I'm interested though is whether they have fixed the problem of the new (not update) installation of NX. On some Vista machines, NX would not install if you did not have .Net 1.1 installed; the problem is that Vista would not always allow the installation of .Net 1.1.

_

[fotoudavid]

still need command pro?

[yyD70S]

Command Pro different program altogether.

[deadpixel]

According to the Nikon Asia support site; in this version:

Support for nik Color Efex Pro 2.0 for Capture NX has been added. See the following website for further details: http://www.niksoftware.com/colorefex.../addinfo.shtml

Can someone with both Capture NX and nik Color Efex Pro 2.0 verify this?

Cheers

_

[spazzer]

wow!! at least got something new from nikon

[Aneurysm]

Tried to download the 1.2 updater for mac but I cannot seem to run it. Anyone else with this problem? I had similar problems with 1.1 as well so I ended up still with ver 1.01..

[jnet6]

Originally Posted by Aneurysm Tried to download the 1.2 updater for mac but I cannot seem to run it. Anyone else with this problem? I had similar problems with 1.1 as well so I ended up still with ver 1.01..

Last nite encounter some problems with the downloading, after while then server seems ok.
not sure about now....
maybe too much people downloading/requesting.

[Squid]

Successfully downloaded Nikon CaptureNX 1.2.0 last night after seeing this thread.

During installation, I discovered that Nikon CaptureNX 1.2.0 needs .NET 2.0 framework, instead of .NET 1.1 framework used in Nikon CaptureNX 1.0.0 to 1.1.0.

During installation, I was asked to re-enter my software serial number and during installation, IIRC, I saw the serial number being verified before Nikon Capture 1.2.0 starts to operates.

My intial impression is more responsive interface and faster image loading as mentioned in updating history. I see a faster speed in file saving in both NEF and JPEG file formats.

[kohweeloon]

new to capture nx. can it be use with d200 to shoot tethered to the computer.

thank

[Squid]

Originally Posted by kohweeloon new to capture nx. can it be use with d200 to shoot tethered to the computer.

Tethered shooting on Nikon D200 requires Nikon Capture Pro which sold separately from Nikon CaptureNX

[kohweeloon]

Originally Posted by Squid Tethered shooting on Nikon D200 requires Nikon Capture Pro which sold separately from Nikon CaptureNX

it is capture 4. cant seem to find capture pro anywhere

thank

[glennyong]

hmmm...... i cannot batch process more than 1k images all at once leh.. i have to put into folders of 60-65images each for batch process leh...

anyone faced such thing ?

my comp specs is E6600 2.4, 4GB ram, 1TB hDD, 256MB 7900GS Sonic, with 18x Sony lightscribe.

anyone ? i dun think i have problems with the specs leh...

[glennyong]

bo lang know hw to solve the problem ?

[lsisaxon]

Originally Posted by Squid Tethered shooting on Nikon D200 requires Nikon Capture Pro which sold separately from Nikon CaptureNX

I think you meant Camera Control Pro.