Had to fix my CV trigger winder

OpenLens · 23rd July 2007

Well, not really "fix" but tighten. Screws loosening seem to be an issue with some CV kit (like the 35 ultron, 50 nokton, etc...) and was in issue with one of my two trigger winders.

So when the trigger loosened to the point where it was no longer useable I opened it up and gave it a good tightening.

I documented how I did it on my website:

http://www.cosina-voigtlander.com/in...id=53&Itemid=1

Hope this helps!

chiif · 23rd July 2007

Thanks Brian!

You're the MAN!

OpenLens · 23rd July 2007

Originally Posted by chiif

Thanks Brian!

You're the MAN!

thanks

this isn't a complicated bit of machinery and is fairly easy to adjust, so i hope this helps a few diy-ers out there

23rd July 2007	#1
OpenLens Member Join Date: Jun 2002 Location: Taipei, Taiwan/ Los Angeles, California. U.S.A. Posts: 376	Had to fix my CV trigger winder Well, not really "fix" but tighten. Screws loosening seem to be an issue with some CV kit (like the 35 ultron, 50 nokton, etc...) and was in issue with one of my two trigger winders. So when the trigger loosened to the point where it was no longer useable I opened it up and gave it a good tightening. I documented how I did it on my website: http://www.cosina-voigtlander.com/in...id=53&Itemid=1 Hope this helps! __________________ @Photojazz Blog @Cosina-Voigtlander.com

23rd July 2007	#2
chiif Advertiser Join Date: Nov 2006 Location: Excelsior S.C #02-25 Posts: 2,367	Re: Had to fix my CV trigger winder Thanks Brian! You're the MAN!