ClubSNAP Photography Forums

Go Back   ClubSNAP Photography Forums > Usergroup Discussions > Underwater Photography

Underwater Photography All things nautically & photographically related. Dive in!!


 
Thread Tools
Old 12th June 2007   #1
happimonster
New Member
 
Join Date: Apr 2005
Location: That Dot
Posts: 26
Default Mju 720 Series Underwater Settings

Hi!

Wondering if anyone has used Mju 720/725 to take underwater photo?
Can you share the settings that you've used? Or your experiences for this camera?

Took it out for a diving trip for the 1st time. Tried the underwater mode but it doesn't turn out well. I think my old camera (Mju 410) was better using the auto mode.
Tried 'cloudy' mode + increasing ISO to 200/400. Don't work either.
Tried underwater mode + Marco + Forced Flash - Slightly Better (But that was my last dive and I couldn't try other settings)

Thanks in advance
happimonster is offline  
Old 12th June 2007   #2
camerashy
Member
 
Join Date: Sep 2004
Posts: 183
Default Re: Mju 720 Series Underwater Settings

For u/w shoot, I normally don't rely on the pre-set WB setting. I bring a white board with me to reset the WB setting whenever I change depth.
camerashy is offline  
Old 12th June 2007   #3
jelimon
Member
 
Join Date: Jan 2007
Posts: 165
Default Re: Mju 720 Series Underwater Settings

i used to shoot with a mju600, not sure if the 725 differs much.
Oly usu has 3 uw settings - macro (nemo), WA1 (barracudas) and WA2 (dolphin).
Depending on what kind of subjects u're taking - small stuff u wld choose macro, anything else i usu just tikam WA1 or WA2. The WB will be auto-adjusted cos dun think all compacts come with custom WB. Anywayz, shld try use either cloudy or UW for WB ba?

Some samples taken with the mju600...mostly in macro UW mode (nemo)
http://aquaharmonix.multiply.com/photos/album/3
jelimon is offline  
Sponsored Link
Old 12th June 2007   #4
happimonster
New Member
 
Join Date: Apr 2005
Location: That Dot
Posts: 26
Default Re: Mju 720 Series Underwater Settings

Hi camerashy,
My camera do not have full manual settings. I can only adjust a little. Don't think I can do the white-balance thingee.

Hi jelimon,
Your pix looks nice! Yup. I've the same UW mode as you. The more decent photos are taken with the 'Nemo mode' too. The other 2 modes don't work out well for me. Did you use flash when u take the 'barracuda/dolphin' mode?

Think I'll try more of the Nemo Mode in my next dive. One thing I've noticed is that the default setting for this mode is "Sunny day"? Did you change the WB?

I've tried the cloudy WB before trying out the UW Nemo mode. it was quite bad. everything looks blur and feels like the water is moving.. Maybe I set my ISO too high? (200-400)

Also, did you 'photoshop-ed" your photos eh?

Thanks both!
happimonster is offline  
Old 13th June 2007   #5
jelimon
Member
 
Join Date: Jan 2007
Posts: 165
Default Re: Mju 720 Series Underwater Settings

Originally Posted by happimonster View Post
Hi camerashy,
My camera do not have full manual settings. I can only adjust a little. Don't think I can do the white-balance thingee.

Hi jelimon,
Your pix looks nice! Yup. I've the same UW mode as you. The more decent photos are taken with the 'Nemo mode' too. The other 2 modes don't work out well for me. Did you use flash when u take the 'barracuda/dolphin' mode?

Think I'll try more of the Nemo Mode in my next dive. One thing I've noticed is that the default setting for this mode is "Sunny day"? Did you change the WB?

I've tried the cloudy WB before trying out the UW Nemo mode. it was quite bad. everything looks blur and feels like the water is moving.. Maybe I set my ISO too high? (200-400)

Also, did you 'photoshop-ed" your photos eh?

Thanks both!
hey happie, thanks for the compliments! I forced the flash for all the pictures regardless of which uw mode in order to compensate for the colours lost through spectrum absorption.
Can't remember if I did change the WB, was a newbie and that was my 2nd attempt into UW photography so just let the camera do everything for me!
Blur can be becos of many reasons ba? ISO shldn't affect the bluriness, but u prolly get more noise with higher ISO. Sometimes focusing is a problem and these guys here have suggested avoiding the use of the AiAF.
Completely avoided dolphins and barracudas - wasn't so much into wide angle at that time and my skills and the camera lens didn't allow me to venture into that.
Did photoshop the pics using very basic knowledge that I had at that time - which is auto levels, auto colour or colour balance. Prolly cropped some pics here n there also.
jelimon is offline  
Old 13th June 2007   #6
happimonster
New Member
 
Join Date: Apr 2005
Location: That Dot
Posts: 26
Default Re: Mju 720 Series Underwater Settings

Yo. Pai say. What's AiAF?

And you have some photos of the shark/manta/dive guide - u also did that in Marco (nemo) mode?

Pardon me for asking so much questions eh. Cos I think there's not much mju series users here. :P Thanks!!
happimonster is offline  
Old 14th June 2007   #7
jelimon
Member
 
Join Date: Jan 2007
Posts: 165
Default Re: Mju 720 Series Underwater Settings

Originally Posted by happimonster View Post
Yo. Pai say. What's AiAF?

And you have some photos of the shark/manta/dive guide - u also did that in Marco (nemo) mode?

Pardon me for asking so much questions eh. Cos I think there's not much mju series users here. :P Thanks!!
no wor, i used either one of the WA modes...think the cam actually zooms when u use nemo mode, so it's not suitable.

heh, it's been awhile since i last shot with the mju, most of it down the drain liao
jelimon is offline  
Closed Thread

Bookmarks

Thread Tools

Forum Jump


All times are GMT +8. The time now is 03:52 AM.


Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Copyright © 2002 - 2009 ClubSNAP.com
Page generated in 0.07634 seconds with 7 queries