Results 1 to 5 of 5

Thread: Pushing provia 100 film

  1. #1
    Senior Member
    Join Date
    Nov 2002
    Location
    谁是你
    Posts
    2,706

    Default Pushing provia 100 film

    Can I push provia 100 to 200 or even 400 ? How much push can provia 100 takes. Advise pls as I need some fast slide films for today evening but don't have the time to go down to Penisular Plaza.

  2. #2
    Member
    Join Date
    Jul 2002
    Location
    Braddell
    Posts
    19

    Default

    usually the inside of the provia box will tell u how much it can be pushed

    like for provia 400F

    it says that it can tolerate up to 3.5 stops thats ISO 4800 max i think

    tho i don't think u should push it that far

    so maybe provia 100 can push up to 400 or so with tolerable grain.

    check the inside of the box

    hope this helps

  3. #3

    Default

    Can anyone who uses boxed Provia 100F and 400F confirm what's on the boxes?

    Thanks.



    Originally posted by karab
    usually the inside of the provia box will tell u how much it can be pushed

    like for provia 400F

    it says that it can tolerate up to 3.5 stops thats ISO 4800 max i think

    tho i don't think u should push it that far

    so maybe provia 100 can push up to 400 or so with tolerable grain.

    check the inside of the box

    hope this helps

  4. #4
    Member
    Join Date
    Jul 2002
    Location
    Braddell
    Posts
    19

    Default

    hi since u asked,

    i went to dig up my provia box in the dustbin

    ok here's what it says for provia 400F

    "this film yields good results for exposures made from EI400 to EI3200 and can be exposed at EI4800"


    unfortunately there's nothing in the provia 100 box that says it can be pushed

    but i've pushed to 200 before and it's still fine.

  5. #5

    Default

    Thanks for your trouble, it is much appreciated. I use bulk Provia, so no box.


    Originally posted by karab
    hi since u asked,

    i went to dig up my provia box in the dustbin

    ok here's what it says for provia 400F

    "this film yields good results for exposures made from EI400 to EI3200 and can be exposed at EI4800"


    unfortunately there's nothing in the provia 100 box that says it can be pushed

    but i've pushed to 200 before and it's still fine.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •