ClubSNAP Photography Forums

Go Back   ClubSNAP Photography Forums > Equipment Discussions > Fujifilm


 
Thread Tools
Old 15th September 2006   #1
donchua
Senior Member
 
Join Date: Nov 2004
Location: Tampines
Posts: 7,814
Default 3rd Party NP-120 Charger Can Charge NP-95 Battery?

Since original BC-65S can use to charge F30 NP-95 & F11 NP-120 battery.
So can a 3rd party NP-120 charger use to charge NP-95 battery?
Just thinking..
donchua is offline  
Old 15th September 2006   #2
Isaiahfortythirtyone
Senior Member
 
Join Date: Jul 2005
Location: Clementi
Posts: 2,470
Default Re: 3rd Party NP-120 Charger Can Charge NP-95 Battery?

yeah i wanna know too. apparently EG doesnt have NP95 charger. and i'm not sure which other chargers are worth buying
Isaiahfortythirtyone is offline  
Old 16th September 2006   #3
kmlee
New Member
 
Join Date: Oct 2003
Location: Singapore
Posts: 20
Default Re: 3rd Party NP-120 Charger Can Charge NP-95 Battery?

Hi

Had a friend's F30 to try out with my F11, the other day. The NP-95 can fit into an F11. Maybe you need to glue a shim as it's a bit shorter. The NP-120 is a bit of tight fit into the F30 because of the battery tab.

But I daren't turn on either camera with the batteries exchanged!

It's highly likely that the 3rd party charger (for F11) *can* handle the NP-95. But of course, it's good to test with a 3rd party NP-95. I have the EDWORKS charger that cantake multiple plates to hold various battery types.

Cheers
kmlee is offline  
Old 16th September 2006   #4
donchua
Senior Member
 
Join Date: Nov 2004
Location: Tampines
Posts: 7,814
Default Re: 3rd Party NP-120 Charger Can Charge NP-95 Battery?

Originally Posted by kmlee
Hi

Had a friend's F30 to try out with my F11, the other day. The NP-95 can fit into an F11. Maybe you need to glue a shim as it's a bit shorter. The NP-120 is a bit of tight fit into the F30 because of the battery tab.

But I daren't turn on either camera with the batteries exchanged!

It's highly likely that the 3rd party charger (for F11) *can* handle the NP-95. But of course, it's good to test with a 3rd party NP-95. I have the EDWORKS charger that cantake multiple plates to hold various battery types.

Cheers
But is it that the NP-95 & NP-120 battery spec almost same?
Think NP-95 is 3.6V & NP-120 is 3.7V and both 1800mah.
The 3 contacts on the both batteyr same position?

If same, should not be a problem to use same 3rd party charger
since original also use same charger..

Last edited by donchua; 16th September 2006 at 11:01 PM.
donchua is offline  
Closed Thread

Bookmarks

Thread Tools

Forum Jump


All times are GMT +8. The time now is 12:18 AM.


Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Copyright © 2002 - 2009 ClubSNAP.com
Page generated in 0.05305 seconds with 7 queries