Results 1 to 17 of 17

Thread: Problems with Vosonic 8360

  1. #1
    vince123123
    Guests

    Default Problems with Vosonic 8360

    Just discovered a new problem with my 8360 - when I copy from a Transcend 120x card to the HDD, all the files are corrupted....but when copying from the card to the computer direct, everything is fine.

    Testing with other cards seem to be okay...

    Anyone faced similar experiences?

  2. #2
    Member
    Join Date
    Aug 2005
    Location
    Singapore, Singapore, Singapor
    Posts
    1,109

    Default Re: Problems with Vosonic 8360

    No. My V8360 works fine. Perhaps bring back to east gear for testing. It could be the card's fault though.
    "Photography is an austere and blazing poetry of the real" -Ansel Adams

  3. #3

    Default Re: Problems with Vosonic 8360

    Quote Originally Posted by vince123123
    Just discovered a new problem with my 8360 - when I copy from a Transcend 120x card to the HDD, all the files are corrupted....but when copying from the card to the computer direct, everything is fine.

    Testing with other cards seem to be okay...

    Anyone faced similar experiences?
    Bro,

    Not sure if you are aware of this firmware version DSP Firmware (0A-1.2.6), and it states :
    "Improve the Operation System (OS) Note: This firmware version is not compatible with Transcend 120X 2GB and 4GB CF card. If you have these Transcend CF cards, please remain the version 0A-1.2.5 or 0A-1.3.0-B0. The firmware to solve this problem is being studied now." on the website mentioned below.


    Info obtained from here.

  4. #4
    vince123123
    Guests

    Default Re: Problems with Vosonic 8360

    Wah never read of this before, thanks for the headsup.

    I'll go check on the firmware version - but to add, I have never updated the firmware since I bought it during the special pre-order that East Gear had.

    Quote Originally Posted by ipin
    Bro,

    Not sure if you are aware of this firmware version DSP Firmware (0A-1.2.6), and it states :
    "Improve the Operation System (OS) Note: This firmware version is not compatible with Transcend 120X 2GB and 4GB CF card. If you have these Transcend CF cards, please remain the version 0A-1.2.5 or 0A-1.3.0-B0. The firmware to solve this problem is being studied now." on the website mentioned below.


    Info obtained from here.

  5. #5

    Default Re: Problems with Vosonic 8360

    Quote Originally Posted by vince123123
    Wah never read of this before, thanks for the headsup.

    I'll go check on the firmware version - but to add, I have never updated the firmware since I bought it during the special pre-order that East Gear had.
    You are welcome.

    neither did I. I used Lexar CF cards without any problems. Never used Transend before to share my experiences.

  6. #6

    Default Re: Problems with Vosonic 8360

    i having same problem as you but mine is not able transfer pic from 2GB Transcend 120x to FD70x. I noticed my 2GB is also slow in read & write on DSLR. i have no problem with Lexar 80x & Kingston 133x. i doubt is your Vosonic problem. today i will try to approach Best Bargain to get my Transcend replace.

  7. #7
    vince123123
    Guests

    Default Re: Problems with Vosonic 8360

    Okay do let me know the results so I can see if I should consider changing mine too.

    Quote Originally Posted by Vincere
    i having same problem as you but mine is not able transfer pic from 2GB Transcend 120x to FD70x. I noticed my 2GB is also slow in read & write on DSLR. i have no problem with Lexar 80x & Kingston 133x. i doubt is your Vosonic problem. today i will try to approach Best Bargain to get my Transcend replace.

  8. #8
    Member
    Join Date
    Aug 2006
    Location
    Selangor D.E.
    Posts
    1,625

    Default Re: Problems with Vosonic 8360

    So problem is Transcend not Vosonic? Blu just got a 2GB Transcend 120X over the weekend... Let me try over tonight.

  9. #9

    Default Re: Problems with Vosonic 8360

    arrived Best Bargain at SLQ 6:20pm was redirect to next door to look for Mdm Ngoi to arrange 2gb Transcend CF to send to Taiwan for service. Expecting to wait for about 2 weeks. Mdm Ngoi finish work at 6pm (Mon to Fri). Will have to make another trip tomorrow.

  10. #10
    Member
    Join Date
    Aug 2006
    Location
    Selangor D.E.
    Posts
    1,625

    Default Re: Problems with Vosonic 8360

    Think only certain Transcend units only. Blu's Transcend working on with the older vosonic. 6300, 300-w and 2160.

  11. #11
    vince123123
    Guests

    Default Re: Problems with Vosonic 8360

    Hmm, the problem now is with the new 8360 though, I never tested on the old ones.

  12. #12
    Member
    Join Date
    Aug 2006
    Location
    Selangor D.E.
    Posts
    1,625

    Default Re: Problems with Vosonic 8360

    oh ok..blu don't have the new vosonics...them old ones still functional.

  13. #13

    Default Re: Problems with Vosonic 8360

    Quote Originally Posted by vince123123
    Wah never read of this before, thanks for the headsup.

    I'll go check on the firmware version - but to add, I have never updated the firmware since I bought it during the special pre-order that East Gear had.
    Bro,
    I was at EG and the tech guy (Dun wan to mention his name) told me that "Normal" CF copying speed is for cards up to 80x, "High" is for card speeds up to 120x and "Ultra" is for cards above 120x. Why dun you try coping at "High" speed on your 120x card to see if this resolves your problem?
    Last edited by ipin; 6th September 2006 at 04:49 PM.

  14. #14
    vince123123
    Guests

    Default Re: Problems with Vosonic 8360

    Yeap I'm was on High already. Their "ULTRA" mode doesn't work on some cards.

    Quote Originally Posted by ipin
    Bro,
    I was at EG and the tech guy (Dun wan to mention his name) told me that "Normal" Cf coping speed is for cards up to 80x, "High" is for card speeds up to 120x and "Ultra" is for cards above 120x. Why dun you try coping at "High" speed on your 120x card to see if this resolves your problem?

  15. #15

    Default Re: Problems with Vosonic 8360

    Quote Originally Posted by vince123123
    Yeap I'm was on High already. Their "ULTRA" mode doesn't work on some cards.
    Think it's the brand of cards liao. My Lexar CF cards works flawlessly.

  16. #16
    vince123123
    Guests

    Default Re: Problems with Vosonic 8360

    Hmm not so much of brand, but if you use a card where the speed is too slow, and if you use ULTRA, the device will not copy the card.

    You can try on a 24x Lexar and I dont think it will work either.

    Quote Originally Posted by ipin
    Think it's the brand of cards liao. My Lexar CF cards works flawlessly.

  17. #17

    Default Re: Problems with Vosonic 8360

    Quote Originally Posted by vince123123
    Hmm not so much of brand, but if you use a card where the speed is too slow, and if you use ULTRA, the device will not copy the card.

    You can try on a 24x Lexar and I dont think it will work either.
    Your firmware and mine is the same. We bought during the pre-launch. I have used Sandisk Normal, Ultra II, Lexar x80 & even the Seagate Microdisk. All can leh.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •