D50 "Enter" button not working

itsybitsyspidy · 16th July 2006

My "Enter" button on D50 not working. Can't zoom my photos on camera without this function. Got other work around? Is there smth like a reset button for the camera?

westwest1 · 16th July 2006

Bring go NSC tomolo for servicing...

_espn_ · 16th July 2006

Originally Posted by itsybitsyspidy

My "Enter" button on D50 not working. Can't zoom my photos on camera without this function. Got other work around? Is there smth like a reset button for the camera?

Should have ba.. check the manual for the D50, should be ok lah

zcwnfx · 16th July 2006

confirm got reset button one...

maybe u check it out and see how? then dont need to waste a trip to NSC

hazta · 16th July 2006

Itz at e bottom of ur cam...

itsybitsyspidy · 16th July 2006

hm tried resetting, no effect. gotta bring it down. first time heading down to nsc, just bring warranty card can liao?

_espn_ · 16th July 2006

Originally Posted by itsybitsyspidy

hm tried resetting, no effect. gotta bring it down. first time heading down to nsc, just bring warranty card can liao?

Bring receipt also.

ipin · 16th July 2006

Originally Posted by itsybitsyspidy

hm tried resetting, no effect. gotta bring it down. first time heading down to nsc, just bring warranty card can liao?

Since your cam is going to be in for a week or two, might as well bring all your other lenses, flash etc. in for servicing too.

Then when everything is ready, everything would be good as new. And ya, bring the receipt(s) too.

_espn_ · 16th July 2006

Originally Posted by ipin

Since your cam is going to be in for a week or two, might as well bring all your other lenses, flash etc. in for servicing too. Then when everything is ready, everything would be good as new. And ya, bring the receipt(s) too.

That's why general servicing isn't free

itsybitsyspidy · 16th July 2006

Originally Posted by _espn_

That's why general servicing isn't free

i cant service all my other equipment even though it's under warranty? i.e. general servicing must pay ah?

_espn_ · 16th July 2006

Originally Posted by itsybitsyspidy

i cant service all my other equipment even though it's under warranty? i.e. general servicing must pay ah?

Yes, general servicing is not free.

itsybitsyspidy · 16th July 2006

Originally Posted by ipin

Since your cam is going to be in for a week or two, might as well bring all your other lenses, flash etc. in for servicing too. Then when everything is ready, everything would be good as new. And ya, bring the receipt(s) too.

omg are you serious it takes that long? i was thinking it's probably some firmware problem...

itsybitsyspidy · 16th July 2006

Originally Posted by _espn_

Yes, general servicing is not free.

wuds the price like?

_espn_ · 16th July 2006

Originally Posted by itsybitsyspidy

omg are you serious it takes that long? i was thinking it's probably some firmware problem...

Depends on the level of difficulty necessary to repair, 2 weeks is a bit long, I had a D2HS sent in for 1 month+ the other time, but it come back as good as new,

_espn_ · 16th July 2006

Originally Posted by itsybitsyspidy

wuds the price like?

Beats me, have to see what kind of general servicing you're looking at

Maybe a few hundred or so per item?

itsybitsyspidy · 16th July 2006

Originally Posted by _espn_

Beats me, have to see what kind of general servicing you're looking at Maybe a few hundred or so per item?

wow. thought it'd be less than a hundred just to clean up the camera.

_espn_ · 16th July 2006

Originally Posted by itsybitsyspidy

wow. thought it'd be less a hundred just to clean up the camera.

If camera under warranty and got problem of course free lah, if you nothing to do just send in for make up, rogue powder applying of course charge

ipin · 16th July 2006

Originally Posted by itsybitsyspidy

omg are you serious it takes that long? i was thinking it's probably some firmware problem...

You dun want to rush them. Let them take their time and do their job. The good technicians wun have only your camera or other equipment to attend to. It also depends on how many other jobs they have ahead of yours.

2 weeks is a rough estimate only. Just be prepared for any amount of waiting time as it could be the button contacts which are faulty or they may have to replace the entire circuit board, and these takes time.

_espn_ · 16th July 2006

Originally Posted by ipin

You dun want to rush them. Let them take their time and do their job. The good technicians wun have only your camera or other equipment to attend to. It also depends on how many other jobs they have ahead of yours.

2 weeks is a rough estimate only. Just be prepared for any amount of waiting time as it could be the button contacts which are faulty or they may have to replace the entire circuit board, and these takes time.

Don't worry lah, they will service it but it depends on who come first

If your set is in the queue, of course gotta wait lor

longkangman · 16th July 2006

If nothing wrong better dont send in for cleaning. :duuno
Good luck.

YMMV

16th July 2006	#1
itsybitsyspidy Member Join Date: Jul 2004 Posts: 1,238	D50 "Enter" button not working My "Enter" button on D50 not working. Can't zoom my photos on camera without this function. Got other work around? Is there smth like a reset button for the camera?

16th July 2006	#2
westwest1 Deregistered Join Date: Feb 2006 Location: @ AMK Posts: 2,620	Re: D50 "Enter" button not working Bring go NSC tomolo for servicing...

16th July 2006	#4
zcwnfx Member Join Date: Jun 2005 Location: Potong Pasir Posts: 541	Re: D50 "Enter" button not working confirm got reset button one... maybe u check it out and see how? then dont need to waste a trip to NSC __________________ D70s-er Since 2005

16th July 2006	#5
hazta Member Join Date: Jul 2005 Location: SG,Northern Posts: 1,025	Re: D50 "Enter" button not working Itz at e bottom of ur cam...

16th July 2006	#6
itsybitsyspidy Member Join Date: Jul 2004 Posts: 1,238	Re: D50 "Enter" button not working hm tried resetting, no effect. gotta bring it down. first time heading down to nsc, just bring warranty card can liao?

16th July 2006	#20
longkangman Senior Member Join Date: Jul 2005 Location: sewage drain/manhole Posts: 4,959	Re: D50 "Enter" button not working If nothing wrong better dont send in for cleaning. :duuno Good luck. YMMV __________________ Studio TFCD :-)