Nikon Capture NX 1.0 Full Version/Trial - Windows/MAC

[Ryzuan]

Good news, the full/trial version is now available for download from Nikon USA site.
Anybody using it already. How?

[longkangman]

Originally Posted by Ryzuan Good news, the full/trial version is now available for download from Nikon USA site. Anybody using it already. How?

check this link and go to page 6,7,8

[Cyberian]

You can download it from here
http://support.nikontech.com/cgi-bin...185&p_cv=1.185

[jnet6]

NX ROCKsss!

[Cyberian]

Originally Posted by jnet6 NX ROCKsss!

Agreed... NX ROCKssssssssssssssssss

[Errz]

Originally Posted by jnet6 NX ROCKsss!

why nx rockss ah
show sample leh :P

[_espn_]

Originally Posted by Errz why nx rockss ah show sample leh :P

<<< Link removed by Admin. Violation of Terms of Use guideline #8 >>>

[Taurean]

Does anyone knows if the NX can be used to load curves onto the D70? Or must i get the Nikon capture s/w instead?

I've downloaded the trail version for NX but couldn't figure out how to load curves.

[deadpixel]

Originally Posted by Taurean Does anyone knows if the NX can be used to load curves onto the D70? Or must i get the Nikon capture s/w instead? I've downloaded the trail version for NX but couldn't figure out how to load curves.

I believe this is a feature of Nikon Camera Control Pro, now a seperate purchase from Capture...

[Taurean]

Originally Posted by deadpixel I believe this is a feature of Nikon Camera Control Pro, now a seperate purchase from Capture...

ic

Thanks deadpixel.

[_espn_]

Originally Posted by _espn_ <<< Link removed by Admin. Violation of Terms of Use guideline #8 >>>

How is sharing of resources found elsewhere a violation of guidelines?

I see links to DPReview, Nikonians all around, are they all violation?

[deadpixel]

Originally Posted by _espn_ How is sharing of resources found elsewhere a violation of guidelines? I see links to DPReview, Nikonians all around, are they all violation?

Huh?! What happend?

I thought rule #8 was about Commercial Advertising or Promotions of other forums? All I saw in the link this afternoon was a discussion about experiences with Capture NX

How does that in anyway promote the other forum or serve to drive us to them???

Isn't the administration going a little over here?

_
Matt

[Artosoft]

Originally Posted by deadpixel I believe this is a feature of Nikon Camera Control Pro, now a seperate purchase from Capture...

.

With that total cost...., I think I am happy with NC (+ CivIV of course , still a lot cheaper than NX + Control Pro).

Regards,
Arto.

[deadpixel]

Originally Posted by Artosoft . With that total cost...., I think I am happy with NC (+ CivIV of course , still a lot cheaper than NX + Control Pro). Regards, Arto.

I was doing a side-by-side comparision between Nikon Capture 4 Camera Control (NC4CC) and Nikon Camera Control Pro (NCCP) and found that there really isn't much difference in functionality, aside from the interface. In fact, there's one change that I found really irritating!

In NC4CC you can configure the photo download to send it to NC4's multiple image browser where you can immediately access the photo to do your postprocessing. In NCCP, you only have the option to send it to a viewer, a watched folder and a third option that I can't remember. The problem is that unlike NC4's multiple image browser, NCNX's Viewer doesn't allow you to edit the photo in NCNX directly, meaning that you can't double-click on the image to have it open in NCNX. You still have to go into NCNX's browser to open the image. *Sigh* why can't they have an option to open the image directly in NCNX? How difficult is that?

_

[Artosoft]

Originally Posted by deadpixel I was doing a side-by-side comparision between Nikon Capture 4 Camera Control (NC4CC) and Nikon Camera Control Pro (NCCP) and found that there really isn't much difference in functionality, aside from the interface. In fact, there's one change that I found really irritating! In NC4CC you can configure the photo download to send it to NC4's multiple image browser where you can immediately access the photo to do your postprocessing. In NCCP, you only have the option to send it to a viewer, a watched folder and a third option that I can't remember. The problem is that unlike NC4's multiple image browser, NCNX's Viewer doesn't allow you to edit the photo in NCNX directly, meaning that you can't double-click on the image to have it open in NCNX. You still have to go into NCNX's browser to open the image. *Sigh* why can't they have an option to open the image directly in NCNX? How difficult is that? _

Don't worry, NCNX and NCCP is just start (v1.0 maybe?). It might be improve in the future. To bad, looks like Nikon drop support for NC (stop at v4.4.0 (windows)) .

Buy CivIV..., and forget about NCNX and NCCP !

Edit: Not NC4CC, it is NCNX. Sorry, too fast...

Regards,
Arto.

[_espn_]

Originally Posted by Artosoft Don't worry, NC4CC and NCCP is just start (v1.0 maybe?). It might be improve in the future. To bad, looks like Nikon drop support for NC (stop at v4.4.0 (windows)) . Buy CivIV..., and forget about NC4CC and NCCP ! Regards, Arto.

Woah.. pro advice. CivIV can edit NEF? Can demonstrate?

[Artosoft]

Originally Posted by _espn_ Woah.. pro advice. CivIV can edit NEF? Can demonstrate?

No can not!

Regards,
Arto.

[_espn_]

Originally Posted by Artosoft No can not! Regards, Arto.

Then why buy CivIV and forget about NC, NX?

[Cyberian]

Wat's CivIV? Any Link?

[_espn_]

Originally Posted by Cyberian Wat's CivIV? Any Link?

I also don't know, ask Artosoft, he claimed that CivIV can do everything and no need anymore Nikon software, but he like don't want to share what it is or tell us about it.