Questions on Seagull TLR

Tweek · 17th December 2002

Just got an old Seagull TLR unit (no I didn't pick up from u-know-who), found a manual on the web, and finally figured out how to load the film. But still have some questions, hope someone can help me!

a) Since this is a fully manual camera with no light meter, can I use my 35mm film SLR to meter first, then I use the same metering on the TLR? Will the exposure be equivalent?

b) After the last frame is used up, how do I remove the film? Do I have to exchange the position of the film spool and the spare spool, and rewind the entire roll of film back to the film spool?

c) Does RGB or ColorLab process 120 B&W film? And B&W = negatives right?

d) what is the cost of developing a roll of 120? Is there such thing as photo prints of 120 film?

e) Does TCW clean TLR lenses? The lens is a little mouldy and dirty...

Bear with me cos I just starting trying MF....thanks in advance for any help rendered!

Save it if you're going to put comments like "it's a crap camera, don't even bother". I know what I'm getting, I just want to try. Thanks for your KIND cooperation.

Ian · 17th December 2002

Quote:

Originally posted by Tweek
a) Since this is a fully manual camera with no light meter, can I use my 35mm film SLR to meter first, then I use the same metering on the TLR? Will the exposure be equivalent?

The equivalent 135 format lens is 50mm. Metering with an SLR will be fine as long as you use 50mm. You can also use longer lenses to 'spot' meter with if you wish.

Quote:

Originally posted by Tweek
b) After the last frame is used up, how do I remove the film? Do I have to exchange the position of the film spool and the spare spool, and rewind the entire roll of film back to the film spool?

When you've taken the 12th frame press the frame advance knob and keep winding forward until you feel no pressure. Then you can open the back and remove the completed spool (120 format transfers from the film spool to take up spool). You'll find a little tab on the backing paper, lick it and stick it down. Store the film in a lightproof container (I wrap mine in aluminum foil).

Quote:

Originally posted by Tweek
d) what is the cost of developing a roll of 120? Is there such thing as photo prints of 120 film?

Others will be able to answer regarding where to process in Singapore. Standard 6x6 format prints are 6"x6" square prints though not sure what is offered in Singapore. Cost is normally similar to 135 film for processing.

Quote:

Originally posted by Tweek
e) Does TCW clean TLR lenses? The lens is a little mouldy and dirty...

Can't answer this one either, however in light of there being dirty and mould I'd recommend you spend a few bucks more and have a full CLA performed on the camera, this includes not only cleaning the optics but also lubricating the shutter and recalibrating it as required as well as a full body clean and lubrication. With TLR's it's a wise move.

dogbot · 17th December 2002

>c) Does RGB or ColorLab process 120 B&W film? And B&W = negatives right?
yes. try also 35mm in bukit timah (2nd ave junction) or fotohub in raffles place oub centre (related to 35mm but more expensive because of location)

>d) what is the cost of developing a roll of 120? Is there such thing as photo prints of 120 film?
about $10-11 for 12 x 4S prints incl proc

kh_drew · 17th December 2002

Quote:

Originally posted by Tweek

c) Does RGB or ColorLab process 120 B&W film? And B&W = negatives right?

d) what is the cost of developing a roll of 120? Is there such thing as photo prints of 120 film?

i][/size]

for slides, same cost as 35mm, $4.80 at RGB, 3 hour turn-over.

andrew

longman · 17th December 2002

You also can use flash meter if you got extra money to buy. otherwise use spot metering is the best, just check metering on the object example skin if you take potrait.

About TLR lens clean, TCW do, but sure will more expensive than ur camera price..

17th December 2002	#1
Tweek Senior Member Join Date: Jan 2002 Location: East Posts: 2,149	Questions on Seagull TLR Just got an old Seagull TLR unit (no I didn't pick up from u-know-who), found a manual on the web, and finally figured out how to load the film. But still have some questions, hope someone can help me! a) Since this is a fully manual camera with no light meter, can I use my 35mm film SLR to meter first, then I use the same metering on the TLR? Will the exposure be equivalent? b) After the last frame is used up, how do I remove the film? Do I have to exchange the position of the film spool and the spare spool, and rewind the entire roll of film back to the film spool? c) Does RGB or ColorLab process 120 B&W film? And B&W = negatives right? d) what is the cost of developing a roll of 120? Is there such thing as photo prints of 120 film? e) Does TCW clean TLR lenses? The lens is a little mouldy and dirty... Bear with me cos I just starting trying MF....thanks in advance for any help rendered! Save it if you're going to put comments like "it's a crap camera, don't even bother". I know what I'm getting, I just want to try. Thanks for your KIND cooperation.

17th December 2002	#3
dogbot Member Join Date: Aug 2002 Posts: 84	Re: Questions on Seagull TLR >c) Does RGB or ColorLab process 120 B&W film? And B&W = negatives right? yes. try also 35mm in bukit timah (2nd ave junction) or fotohub in raffles place oub centre (related to 35mm but more expensive because of location) >d) what is the cost of developing a roll of 120? Is there such thing as photo prints of 120 film? about $10-11 for 12 x 4S prints incl proc

17th December 2002	#5
longman Member Join Date: Dec 2002 Location: South Posts: 748	TLR You also can use flash meter if you got extra money to buy. otherwise use spot metering is the best, just check metering on the object example skin if you take potrait. About TLR lens clean, TCW do, but sure will more expensive than ur camera price..