Results 1 to 4 of 4

Thread: sirui rubber replacements

  1. #1
    Member
    Join Date
    Nov 2004
    Location
    galaxy far far away
    Posts
    1,837

    Default sirui rubber replacements

    Hi fellas, my trusty sirui traveller tripod has served me well and the rubber parts are quite loose. Especially those on the turning knobs on the head. everywhere else is fine.

    Any idea where i can get it replaced or repaired?
    give me a pen, and i'll give you my signature

  2. #2
    Senior Member shierwin's Avatar
    Join Date
    Dec 2008
    Location
    East Coast
    Posts
    3,213

    Default Re: sirui rubber replacements

    Go down to TK Foto, now at Plaza Singapura (if I remember correctly)

  3. #3
    Moderator
    Join Date
    Nov 2010
    Location
    Somewhere
    Posts
    3,445

    Default Re: sirui rubber replacements

    one of the fastest way to fix this is
    1) remove the rubber ring first (just slide it out),
    2) give the rubber and the metal part a good wipe to remove all the oily stuffs
    3) apply a double sided tape on the metal part
    4) put the rubber back...

    At least this was how TK fixed the problem for me.
    Too many great equipments but too little quality photos. [My Flickr] | [My Blog]

  4. #4
    Member
    Join Date
    Nov 2004
    Location
    galaxy far far away
    Posts
    1,837

    Default Re: sirui rubber replacements

    Quote Originally Posted by SkyStrike View Post
    one of the fastest way to fix this is
    1) remove the rubber ring first (just slide it out),
    2) give the rubber and the metal part a good wipe to remove all the oily stuffs
    3) apply a double sided tape on the metal part
    4) put the rubber back...

    At least this was how TK fixed the problem for me.
    thanks, seems like a easy enough diy fix.
    give me a pen, and i'll give you my signature

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •