Results 1 to 3 of 3

Thread: Nikkor 24-120 F4 VR function

  1. #1

    Default Nikkor 24-120 F4 VR function

    Hi All, I have just bought a pre-owned 24-120 f4 lens recently. How do I check whether if the VR is working well. My previous 70-200 will show some vibrating movement in the viewfinder and will have a buzzing sound when activated. There is no sound or vibrations observed with the 24-120 lens when I switched the VR to on. In fact I felt there is no prominent signs to show that the VR is activated. Is this a norm for this lens. Many thanks for your advise.

  2. #2


    While shooting at 120mm, hold with one hand only. U shld see the ovf bounce a lot, when u half press u will notice the vr kick in with a slight shift in the ovf, and the ovf seems to slow motion bob. After awhile (of releasing shutter) the ovf will bob again as vr shuts off.

    Modern vr is quite silent. Its easiest to test vr at the tele end of a lens. Technique is equally important to feel the difference.

  3. #3
    Join Date
    Jun 2012
    Singapore when back at home

    Default Re: Nikkor 24-120 F4 VR function

    Okay, I just checked my copy.

    To check if the VR is operating, set the camera or lens to manual focus. Go to a very quiet area, rest the lens barrel against your ear. Half press the shutter release button. You will hear an audible klunk as the VR is engaged & a very faint hissing sound like water running through a pipe. Release the shutter button you will hear another klunk as the VR disengaged & locked.

    The other method is as mentioned by Alfie. You should observe that the OVF is very stable with the VR engaged as the camera is moved vertically.
    Last edited by Light Machinery; 5th May 2015 at 10:03 PM.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts