Bulb Exposure

[josh2415]

Help! Sure hope this is not a dumb question!

I set my 350D to <M> and accidentally set it to Bulb exposure and now I cannot set it back! Tried turning the dial but nothing happened. Check my dial and it is ok. Checked the manual, nothing was said. I persume that I can just turn the dial back to normal setting.

anybody can help me here? Any way to soft reset?

Thanks in advance!

Rgds

[DEADMETAL]

Try resetting all functions?

[+evenstar]

Originally Posted by josh2415 Help! Sure hope this is not a dumb question! I set my 350D to <M> and accidentally set it to Bulb exposure and now I cannot set it back! Tried turning the dial but nothing happened. Check my dial and it is ok. Checked the manual, nothing was said. I persume that I can just turn the dial back to normal setting. anybody can help me here? Any way to soft reset? Thanks in advance! Rgds

Switch off, remove battery, replace batt and try again?

[fWord]

If you turn the dial just a single notch in the reverse direction, it should revert back 30 seconds. I've done this a few times myself, but never had issues bringing it back to its usual self.

[josh2415]

Tried and clear all the camera settings looks ok but when I tried to (in M mode) to turn the dial, seems like the exposure time kept on increasing WHICHEVER way I turn the dial!!!! When in reach 30", it goes into the bulb function and stuck there.

Tried also removing the battery, re-flash the ROM, remove the CF.... urgh! Still the same!

Well, seems like there is something wrong with the dial then...

Thanks!

Rgds

[n0d3]

Have you tried using the dial in other settings? Like Av/Tv?

[DEADMETAL]

Some glitch I guess, send it back to canon.

[josh2415]

Tried everything.... Guess time to get it service then!

Thanks!

Rgds