Humidity control of Digi-Cab AD-060

taydanny · 5th May 2005

I'm new in electronic dry cabinet, need some advise for the Humidity temp.

Staff at Digital Photo tell me set the humidity level to point "B" (Normal setting) then leave it for one day, but temp on the digital display now "31%" is that normal?

Because refer to the instruction manual camera humidity are 45%-55%...

Danny

Del_CtrlnoAlt · 5th May 2005

temp is 31degree celsius u mean?

% is the relative humidity level. if its 31 den i think its too low, try opening the door for a while, and reduce the power.

kennyleong · 5th May 2005

humidity level best to keep it at around 50%..
for temperature wise, i dont really know much about it..... I dont care about it though..

worker bee · 7th May 2005

You should turn it counter clockwise to the 9 oclock position .
I think that is the "A" position .
I am getting about 48% there .

Rgs

Dann · 8th May 2005

Best to keep it under 50% to prevent fungus growth. I think about 40% should be ok.

5th May 2005	#1
taydanny Member Join Date: May 2005 Location: Punggol 21 Posts: 142	Humidity control of Digi-Cab AD-060 I'm new in electronic dry cabinet, need some advise for the Humidity temp. Staff at Digital Photo tell me set the humidity level to point "B" (Normal setting) then leave it for one day, but temp on the digital display now "31%" is that normal? Because refer to the instruction manual camera humidity are 45%-55%... Danny

5th May 2005	#2
Del_CtrlnoAlt Senior Member Join Date: Feb 2003 Location: Outside the Dry Box. Posts: 16,342	temp is 31degree celsius u mean? % is the relative humidity level. if its 31 den i think its too low, try opening the door for a while, and reduce the power. __________________ Logging Off Permanently. Those who need to contact me will know where to contact me.

5th May 2005	#3
kennyleong Senior Member Join Date: Mar 2005 Location: Clementi Posts: 908	humidity level best to keep it at around 50%.. for temperature wise, i dont really know much about it..... I dont care about it though..

7th May 2005	#4
worker bee Member Join Date: Feb 2005 Posts: 54	You should turn it counter clockwise to the 9 oclock position . I think that is the "A" position . I am getting about 48% there . Rgs

8th May 2005	#5
Dann Member Join Date: Mar 2004 Location: -Not Found- Posts: 582	Best to keep it under 50% to prevent fungus growth. I think about 40% should be ok.